Difference between revisions of "User:Tohline/SphericallySymmetricConfigurations/IntroductorySummary"
m (→Structure:) 
(→Structure:: Clean up text throughout this overview chapter) 

Line 8:  Line 8:  
===Structure:===  ===Structure:===  
Here we show how the set of [[User:Tohline/PGE#Principal_Governing_Equationsprincipal governing equations]] (PGEs) can be solved to determine the equilibrium structure of spherically symmetric fluid configurations — such as individual, nonrotating stars or protostellar gas clouds. After supplementing the PGEs by specifying an [[User:Tohline/SR#Supplemental_Relationsequation of state of the fluid]], the system of equations is usually solved by employing one of [[User:Tohline/SphericallySymmetricConfigurations/SolutionStrategies#Solution_Strategiesthree techniques]] to obtain a "detailed forcebalanced" model that provides the radius, <math>~R_\mathrm{eq}</math>, of the equilibrium configuration — given its mass, <math>~M</math>, and central pressure, <math>~P_c</math>, for example — as well as details regarding the internal radial profiles of the fluid density and fluid pressure.  Here we show how the set of [[User:Tohline/PGE#Principal_Governing_Equationsprincipal governing equations]] (PGEs) can be solved to determine the equilibrium structure of spherically symmetric fluid configurations — such as individual, nonrotating stars or protostellar gas clouds.  
====Isolated Configurations====  
After supplementing the PGEs by specifying an [[User:Tohline/SR#Supplemental_Relationsequation of state of the fluid]], the system of equations is usually solved by employing one of [[User:Tohline/SphericallySymmetricConfigurations/SolutionStrategies#Solution_Strategiesthree techniques]] to obtain a "detailed forcebalanced" model that provides the radius, <math>~R_\mathrm{eq}</math>, of the equilibrium configuration — given its mass, <math>~M</math>, and central pressure, <math>~P_c</math>, for example — as well as details regarding the internal radial profiles of the fluid density and fluid pressure. If a ''polytropic'' equation of state,  
<table border="0" align="right" cellpadding="5">  <table border="0" align="right" cellpadding="5">  
<tr>  <tr>  
Line 25:  Line 28:  
{{User:Tohline/Math/EQ_Polytrope01}}  {{User:Tohline/Math/EQ_Polytrope01}}  
</div>  </div>  
is adopted, for example, a detailed forcebalanced model is fully described by the radially dependent function, <math>~\Theta_H(\xi) = [\rho(\xi)/\rho_c]^{1/n}</math>, which is obtained by solving the  
<div align="center">  
LaneEmden Equation<br />  
gives rise to equilibrium configurations that have a wide variety of internal structural profiles.  {{ User:Tohline/Math/EQ_SSLaneEmden01 }}  
</div>  
As our various discussions illustrate (see the table of contents, below), simply varying the powerlaw index, {{User:Tohline/Math/MP_PolytropicIndex}}, gives rise to equilibrium configurations that have a wide variety of internal structural profiles.  
If one is not particularly concerned about details regarding the distribution of matter ''within'' the equilibrium configuration, a good estimate of the size of the equilibrium system can be determined by assuming a uniformdensity structure then identifying local extrema in the system's [[User:Tohline/VE#Free_Energy_Expressionglobal free energy]]. An illustrative, undulating freeenergy surface is [[User:Tohline/SSC/Virial/PolytropesEmbeddedOutline#Virial_Equilibrium_of_Embedded_Polytropic_Spheresdisplayed here, on the right]]; blue dots identify equilibria associated with a "valley" of the freeenergy surface while white dots identify equilibria that lie along a "ridge" in the freeenergy surface.  If one is not particularly concerned about details regarding the distribution of matter ''within'' the equilibrium configuration, a good estimate of the size of the equilibrium system can be determined by assuming a uniformdensity structure then identifying local extrema in the system's [[User:Tohline/VE#Free_Energy_Expressionglobal free energy]]. An illustrative, undulating freeenergy surface is [[User:Tohline/SSC/Virial/PolytropesEmbeddedOutline#Virial_Equilibrium_of_Embedded_Polytropic_Spheresdisplayed here, on the right]]; blue dots identify equilibria associated with a "valley" of the freeenergy surface while white dots identify equilibria that lie along a "ridge" in the freeenergy surface.  
Line 48:  Line 56:  
</table>  </table>  
</div>  </div>  
where all three of the dimensionless ''structural form factors'', <math>~\mathfrak{f}_M</math>, <math>~\mathfrak{f}_W</math>, and <math>~\mathfrak{f}_A</math>, are unity, under the assumption that the equilibrium configuration has uniform density and uniform pressure throughout, and are otherwise generically ''of order unity'' for detailed forcebalanced models having a wide range of internal structures. Alternatively, if the  where all three of the dimensionless ''structural form factors'', <math>~\mathfrak{f}_M</math>, <math>~\mathfrak{f}_W</math>, and <math>~\mathfrak{f}_A</math>, are unity, under the assumption that the equilibrium configuration has uniform density and uniform pressure throughout, and are otherwise generically ''of order unity'' for detailed forcebalanced models having a wide range of internal structures. Alternatively, if the parameter, {{User:Tohline/Math/MP_PolytropicConstant}} (which defines the specific entropy of fluid elements throughout the configuration), rather than the central pressure, is held fixed while searching for extrema in the freeenergy, the [[User:Tohline/SSC/Virial/Polytropes#TwoPointsOfViewvirial equilibrium relation for isolated polytropes]] is,  
<div align="center">  <div align="center">  
<table border="0" cellpadding="5" align="center">  <table border="0" cellpadding="5" align="center">  
Line 67:  Line 75:  
</div>  </div>  
====PressureTruncated Configurations====  
If the physical system under consideration — such as a protostellar gas cloud — is not isolated but is, instead, surrounded and ''truncated'' by a hot, tenuous medium that exerts on the system a confining external pressure, <math>~P_e</math>, the configuration's equilibrium parameters will be related via the expression,  If the physical system under consideration — such as a protostellar gas cloud — is not isolated but is, instead, surrounded and ''truncated'' by a hot, tenuous medium that exerts on the system a confining external pressure, <math>~P_e</math>, the configuration's equilibrium parameters will be related via the expression,  
Line 132:  Line 141:  
where the constants,  where the constants,  
<div align="center">  <div align="center">  
<math>~a \equiv \frac{4\pi}{3} \cdot P_e \, ,</math> <math>~b \equiv \biggl( \frac{3}{4\pi} \biggr)^{1/n} \cdot K_\mathrm{n} \mathfrak{f}_A \mathfrak{f}_M^{(n+1)/n} \, ,</math> and <math>~c \equiv \frac{G\mathfrak{f}_W}{5\mathfrak{f}_M^2} \, .</math>  
</div>  
<math>~a  
<math>~b  
</  
</  
Using this virial equilibrium relation (and, for illustration purposes, assuming a = b = c = 1), the [[User:Tohline/SSC/Virial/PolytropesEmbedded/SecondEffortAgain#Plotting_Concise_MassRadius_Relationcurves drawn in the figure that is displayed here, on the right]], show how the equilibrium radius of an embedded, pressuretruncated polytropic sphere varies with mass for seven different adopted polytropic indexes. In direct analogy with the critical pressure that is associated with BonnorEbert spheres, for systems having <math>~n \ge 3</math>, there is a mass, <math>~M_\mathrm{max}</math>, above which equilibrium configurations do not exist; and, when <math>~n > 3</math>, multiple equilibrium configurations having different radii can be constructed for any system having a mass, <math>~M < M_\mathrm{max}</math>.  
Using this virial equilibrium relation (and, for illustration purposes, assuming a = b = c = 1), the [[User:Tohline/SSC/Virial/PolytropesEmbedded/SecondEffortAgain#Plotting_Concise_MassRadius_Relationcurves drawn in the figure that is displayed here, on the right]], show how the equilibrium radius of an embedded, pressuretruncated polytropic sphere varies with mass for seven different adopted polytropic indexes. In direct analogy with the critical pressure that is associated with BonnorEbert spheres, for systems having <math>~n \ge 3</math>, there is a mass, <math>~M_\mathrm{max}</math>, above which equilibrium configurations do not exist; and, when <math>~n > 3</math>,  
A [[User:Tohline/SSC/Structure/PolytropesEmbedded#Embedded_Polytropic_Spheresdetailed forcebalance analysis of the structure of embedded, pressuretruncated polytropic configurations]] reveals, for each choice of {{User:Tohline/Math/MP_PolytropicIndex}}, a massradius relationship that is qualitatively similar to the one deduced from a virial equilibrium analysis. However, the resulting massradius relationship is invariably different in detail and quantitatively more correct than the one prescribed by the virial theorem  A [[User:Tohline/SSC/Structure/PolytropesEmbedded#Embedded_Polytropic_Spheresdetailed forcebalance analysis of the structure of embedded, pressuretruncated polytropic configurations]] reveals, for each choice of {{User:Tohline/Math/MP_PolytropicIndex}}, a massradius relationship that is qualitatively similar to the one deduced from a virial equilibrium analysis. However, the resulting massradius relationship is invariably different in detail and quantitatively more correct than the one prescribed by the virial theorem. At its foundation are models whose internal structural profile — of, for example, the fluid pressure and fluid density — is not uniform but, rather, is precisely that which is required to achieve detailed force balance throughout. Hence, we appreciate that even as <math>~P_e</math> and {{User:Tohline/Math/MP_PolytropicConstant}} are held fixed, in essence the structural form factors must vary from model to model along the more precise "detailed forcebalanced" equilibrium ''sequence.''  
====Bipolytropic Configurations====  
<table border="0" align="right" cellpadding="5">  <table border="0" align="right" cellpadding="5">  
<tr>  <tr>  
Line 182:  Line 156:  
</tr>  </tr>  
</table>  </table>  
Additional insight into the structural properties and evolution of stars can be gained by studying ''bipolytropes'' — also sometimes referred to as ''composite polytropes.'' These are models in which the configuration's "core" is described by a polytropic equation of state having one index — say, <math>~n_c</math> — and the configuration's "envelope" is described by a polytropic equation of state of a different index — say, <math>~n_e</math>. We have found it particularly instructive to examine bipolytropes having <math>~(n_c, n_e) = (5, 1)</math>  Additional insight into the structural properties and evolution of stars can be gained by studying ''bipolytropes'' — also sometimes referred to as ''composite polytropes.'' These are models in which the configuration's "core" is described by a polytropic equation of state having one index — say, <math>~n_c</math> — and the configuration's "envelope" is described by a polytropic equation of state of a different index — say, <math>~n_e</math>. We have found it particularly instructive to examine bipolytropes having <math>~(n_c, n_e) = (5, 1)\, ,</math> in part, because equilibrium models of such systems can be completely described analytically whether they are constructed via a detailed forcebalance analysis or by identifying extrema in the freeenergy function, that is, via a virial theorem analysis.  
Following the lead of [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)] — see, also, [http://adsabs.harvard.edu/abs/1998MNRAS.298..831E Eggleton, Faulkner, and Cannon (1998)] — we have pieced these bipolytropic configurations together mathematically in such a way that the mean molecular weight, {{User:Tohline/Math/MP_MeanMolecularWeight}}, of the fluid is allowed to change in a discontinuous fashion at the coreenvelope interface. As is illustrated in the figure, shown here on the right, a physically interesting equilibrium model "sequence" can be constructed by monotonically shifting the location of the coreenvelope interface from the center of the configuration to its surface while holding fixed the value of the envelopetocore mean molecular weight ratio, <math>~\mu_e/\mu_c</math>. Each curve shows how the relative mass of the core, <math>~\nu \equiv M_\mathrm{core}/M_\mathrm{tot}</math>, correlates with the relative ''size'' of the core, as measured by the ratio of the radial position of the coreenvelope interface to the equilibrium radius of the composite polytropic configuration, <math>~q \equiv r_i/R_\mathrm{eq}</math>. As the figure illustrates, if the jump in the mean molecular weight is sufficiently extreme — specifically, if <math>~\mu_e/\mu_c < 1/3</math> for the bipolytropic configurations being considered here — there is a core mass, <math>~\nu_\mathrm{max}</math>, above which equilibrium configurations do not exist; and, two equilibrium configurations having different core ''sizes'', <math>~q</math>, can be constructed for any system having a core mass, <math>~\nu < \nu_\mathrm{max}</math>. The astrophysical significance of <math>~\nu_\mathrm{max}</math> was first identified in the early 1940s in bipolytropic configurations having <math>~(n_c, n_e) = (\infty, 3/2)</math>, and has been discussed extensively in the context of the evolutionary transition of stars from the main sequence to the giant branch. It is usually referred to as the SchönbergChandrasekhar mass limit.  
====Details====  
In the following table, each green check mark identifies and provides a link to an H_Book chapter that presents a detailed discussion of the topic that is identified on the left — for example, the equilibirum structure of "isolated polytropes" or an "isothermal sphere embedded in an external medium." Mathematical models that provide full solutions to the PGEs, including details regarding the internal structural profiles of equilibrium configurations, are derived in chapters whose check marks fall under the column labeled "Detailed ForceBalance." Insight into the properties of equilibrium systems that is revealed via an analysis of a system's freeenergy and the corresponding scalar virial theorem is presented in chapters whose check marks fall under the column labeled "Virial Equilibrium." Motivated by a striking similarity between the sets of model sequences displayed in the two "massradius" diagrams shown, above, a link also is provided to a chapter that discusses the relationship between the limiting mass associated with BonnorEbert spheres and the SchönbergChandrasekhar mass limit.  In the following table, each green check mark identifies and provides a link to an H_Book chapter that presents a detailed discussion of the topic that is identified on the left — for example, the equilibirum structure of "isolated polytropes" or an "isothermal sphere embedded in an external medium." Mathematical models that provide full solutions to the PGEs, including details regarding the internal structural profiles of equilibrium configurations, are derived in chapters whose check marks fall under the column labeled "Detailed ForceBalance." Insight into the properties of equilibrium systems that is revealed via an analysis of a system's freeenergy and the corresponding scalar virial theorem is presented in chapters whose check marks fall under the column labeled "Virial Equilibrium." Motivated by a striking similarity between the sets of model sequences displayed in the two "massradius" diagrams shown, above, a link also is provided to a chapter that discusses the relationship between the limiting mass associated with BonnorEbert spheres and the SchönbergChandrasekhar mass limit.  
Latest revision as of 18:17, 10 March 2017
 Tiled Menu  Tables of Content  Banner Video  Tohline Home Page  
Applications
Spherically Symmetric Configurations
Structure:
Here we show how the set of principal governing equations (PGEs) can be solved to determine the equilibrium structure of spherically symmetric fluid configurations — such as individual, nonrotating stars or protostellar gas clouds.
Isolated Configurations
After supplementing the PGEs by specifying an equation of state of the fluid, the system of equations is usually solved by employing one of three techniques to obtain a "detailed forcebalanced" model that provides the radius, <math>~R_\mathrm{eq}</math>, of the equilibrium configuration — given its mass, <math>~M</math>, and central pressure, <math>~P_c</math>, for example — as well as details regarding the internal radial profiles of the fluid density and fluid pressure. If a polytropic equation of state,
<math>~P = K_\mathrm{n} \rho^{1+1/n}</math>
is adopted, for example, a detailed forcebalanced model is fully described by the radially dependent function, <math>~\Theta_H(\xi) = [\rho(\xi)/\rho_c]^{1/n}</math>, which is obtained by solving the
LaneEmden Equation
<math>~\frac{1}{\xi^2} \frac{d}{d\xi}\biggl( \xi^2 \frac{d\Theta_H}{d\xi} \biggr) =  \Theta_H^n</math> 
As our various discussions illustrate (see the table of contents, below), simply varying the powerlaw index, <math>~n</math>, gives rise to equilibrium configurations that have a wide variety of internal structural profiles.
If one is not particularly concerned about details regarding the distribution of matter within the equilibrium configuration, a good estimate of the size of the equilibrium system can be determined by assuming a uniformdensity structure then identifying local extrema in the system's global free energy. An illustrative, undulating freeenergy surface is displayed here, on the right; blue dots identify equilibria associated with a "valley" of the freeenergy surface while white dots identify equilibria that lie along a "ridge" in the freeenergy surface.
In the astrophysics community, the mathematical relation that serves to define the properties of configurations that are associated with such freeenergy extrema is often referred to as the scalar virial theorem. Specifically, for isolated systems in virial equilibrium, the following relation between configuration parameters holds:
<math>~\frac{GM^2}{P_c R_\mathrm{eq}^4}</math> 
<math>~=</math> 
<math>~\biggl(\frac{2^2\cdot 5 \pi}{3} \biggr) \frac{\mathfrak{f}_A \cdot \mathfrak{f}_M^2}{\mathfrak{f}_W} \, ,</math> 
where all three of the dimensionless structural form factors, <math>~\mathfrak{f}_M</math>, <math>~\mathfrak{f}_W</math>, and <math>~\mathfrak{f}_A</math>, are unity, under the assumption that the equilibrium configuration has uniform density and uniform pressure throughout, and are otherwise generically of order unity for detailed forcebalanced models having a wide range of internal structures. Alternatively, if the parameter, <math>~K_\mathrm{n}</math> (which defines the specific entropy of fluid elements throughout the configuration), rather than the central pressure, is held fixed while searching for extrema in the freeenergy, the virial equilibrium relation for isolated polytropes is,
<math>~M^{(n1)/n} R_\mathrm{eq}^{(3n)/n} \biggl( \frac{G}{K_\mathrm{n}} \biggr) </math> 
<math>~=</math> 
<math>~\frac{5\mathfrak{f}_A \mathfrak{f}_M}{\mathfrak{f}_W} \biggl(\frac{3}{4\pi \mathfrak{f}_M}\biggr)^{1/n} \, . </math> 
PressureTruncated Configurations
If the physical system under consideration — such as a protostellar gas cloud — is not isolated but is, instead, surrounded and truncated by a hot, tenuous medium that exerts on the system a confining external pressure, <math>~P_e</math>, the configuration's equilibrium parameters will be related via the expression,
<math>~\frac{GM^2}{P_c R_\mathrm{eq}^4}</math> 
<math>~=</math> 
<math>~\biggl(\frac{2^2\cdot 5 \pi}{3} \biggr) \frac{\mathfrak{f}_M^2}{\mathfrak{f}_W} \biggl[ \mathfrak{f}_A  \frac{P_e}{P_c} \biggr] \, ;</math> 
or, fixing <math>~K_\mathrm{n}</math> instead of <math>~P_c</math>, the relevant virial equilibrium expression is,
<math>~P_e </math> 
<math>~=</math> 
<math>~K_\mathrm{n} \mathfrak{f}_A \biggl( \frac{3M}{4\pi R_\mathrm{eq}^3} \cdot \frac{1}{\mathfrak{f}_M} \biggr)^{1 + 1/n}  \frac{\mathfrak{f}_W}{5} \biggl(\frac{3GM^2}{4\pi R_\mathrm{eq}^4} \cdot \frac{1}{\mathfrak{f}_M^2} \biggr) \, .</math> 
It is a virial expression specifically of this form <math>~(</math>with <math>n = \infty</math> and <math>\mathfrak{f}_M = \mathfrak{f}_W = \mathfrak{f}_A = 1)</math> that identifies extrema (e.g., valleys or ridges) in the rainbowcolored freeenergy surface, <math>\mathfrak{G}^*(R_\mathrm{eq}, P_e)</math>, displayed above. As can be determined from this algebraic expression and as the figure illustrates, for any specified mass no equilibrium states exist if <math>~P_e</math> is greater than some limiting value, <math>~P_\mathrm{crit}</math>; the equilibrium configuration associated with the limiting condition, <math>~P_e = P_\mathrm{crit}</math>, is marked by a red dot on the abovedisplayed freeenergy surface. The astrophysical significance of this critical state was first discussed in the mid 1950s in the context of star formation and, specifically, BonnorEbert spheres.
After rearranging terms, for any specified values of the parameters <math>~P_e</math> and <math>~K_\mathrm{n}</math>, this virial equilibrium expression can also be viewed as a massradius relation of the form,
<math>~a R_\mathrm{eq}^4  b M^{(n+1)/n} R_\mathrm{eq}^{(n3)/n} + c M^2</math> 
<math>~=</math> 
<math>~ 0\, ,</math> 
where the constants,
<math>~a \equiv \frac{4\pi}{3} \cdot P_e \, ,</math> <math>~b \equiv \biggl( \frac{3}{4\pi} \biggr)^{1/n} \cdot K_\mathrm{n} \mathfrak{f}_A \mathfrak{f}_M^{(n+1)/n} \, ,</math> and <math>~c \equiv \frac{G\mathfrak{f}_W}{5\mathfrak{f}_M^2} \, .</math>
Using this virial equilibrium relation (and, for illustration purposes, assuming a = b = c = 1), the curves drawn in the figure that is displayed here, on the right, show how the equilibrium radius of an embedded, pressuretruncated polytropic sphere varies with mass for seven different adopted polytropic indexes. In direct analogy with the critical pressure that is associated with BonnorEbert spheres, for systems having <math>~n \ge 3</math>, there is a mass, <math>~M_\mathrm{max}</math>, above which equilibrium configurations do not exist; and, when <math>~n > 3</math>, multiple equilibrium configurations having different radii can be constructed for any system having a mass, <math>~M < M_\mathrm{max}</math>.
A detailed forcebalance analysis of the structure of embedded, pressuretruncated polytropic configurations reveals, for each choice of <math>~n</math>, a massradius relationship that is qualitatively similar to the one deduced from a virial equilibrium analysis. However, the resulting massradius relationship is invariably different in detail and quantitatively more correct than the one prescribed by the virial theorem. At its foundation are models whose internal structural profile — of, for example, the fluid pressure and fluid density — is not uniform but, rather, is precisely that which is required to achieve detailed force balance throughout. Hence, we appreciate that even as <math>~P_e</math> and <math>~K_\mathrm{n}</math> are held fixed, in essence the structural form factors must vary from model to model along the more precise "detailed forcebalanced" equilibrium sequence.
Bipolytropic Configurations
Additional insight into the structural properties and evolution of stars can be gained by studying bipolytropes — also sometimes referred to as composite polytropes. These are models in which the configuration's "core" is described by a polytropic equation of state having one index — say, <math>~n_c</math> — and the configuration's "envelope" is described by a polytropic equation of state of a different index — say, <math>~n_e</math>. We have found it particularly instructive to examine bipolytropes having <math>~(n_c, n_e) = (5, 1)\, ,</math> in part, because equilibrium models of such systems can be completely described analytically whether they are constructed via a detailed forcebalance analysis or by identifying extrema in the freeenergy function, that is, via a virial theorem analysis.
Following the lead of Schönberg & Chandrasekhar (1942) — see, also, Eggleton, Faulkner, and Cannon (1998) — we have pieced these bipolytropic configurations together mathematically in such a way that the mean molecular weight, <math>~\bar{\mu}</math>, of the fluid is allowed to change in a discontinuous fashion at the coreenvelope interface. As is illustrated in the figure, shown here on the right, a physically interesting equilibrium model "sequence" can be constructed by monotonically shifting the location of the coreenvelope interface from the center of the configuration to its surface while holding fixed the value of the envelopetocore mean molecular weight ratio, <math>~\mu_e/\mu_c</math>. Each curve shows how the relative mass of the core, <math>~\nu \equiv M_\mathrm{core}/M_\mathrm{tot}</math>, correlates with the relative size of the core, as measured by the ratio of the radial position of the coreenvelope interface to the equilibrium radius of the composite polytropic configuration, <math>~q \equiv r_i/R_\mathrm{eq}</math>. As the figure illustrates, if the jump in the mean molecular weight is sufficiently extreme — specifically, if <math>~\mu_e/\mu_c < 1/3</math> for the bipolytropic configurations being considered here — there is a core mass, <math>~\nu_\mathrm{max}</math>, above which equilibrium configurations do not exist; and, two equilibrium configurations having different core sizes, <math>~q</math>, can be constructed for any system having a core mass, <math>~\nu < \nu_\mathrm{max}</math>. The astrophysical significance of <math>~\nu_\mathrm{max}</math> was first identified in the early 1940s in bipolytropic configurations having <math>~(n_c, n_e) = (\infty, 3/2)</math>, and has been discussed extensively in the context of the evolutionary transition of stars from the main sequence to the giant branch. It is usually referred to as the SchönbergChandrasekhar mass limit.
Details
In the following table, each green check mark identifies and provides a link to an H_Book chapter that presents a detailed discussion of the topic that is identified on the left — for example, the equilibirum structure of "isolated polytropes" or an "isothermal sphere embedded in an external medium." Mathematical models that provide full solutions to the PGEs, including details regarding the internal structural profiles of equilibrium configurations, are derived in chapters whose check marks fall under the column labeled "Detailed ForceBalance." Insight into the properties of equilibrium systems that is revealed via an analysis of a system's freeenergy and the corresponding scalar virial theorem is presented in chapters whose check marks fall under the column labeled "Virial Equilibrium." Motivated by a striking similarity between the sets of model sequences displayed in the two "massradius" diagrams shown, above, a link also is provided to a chapter that discusses the relationship between the limiting mass associated with BonnorEbert spheres and the SchönbergChandrasekhar mass limit.
Solution Strategies: 
Detailed ForceBalance 
Virial Equilibrium 



© 2014  2021 by Joel E. Tohline 