# User:Tohline/Appendix/Ramblings/BiPolytropeStability

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

# Marginally Unstable Bipolytropes

Our aim is to determine whether or not there is a relationship between (1) equilibrium models at turning points along bipolytrope sequences and (2) bipolytropic models that are marginally (dynamically) unstable toward collapse (or dynamical expansion).

## Overview

Figure 1:  Equilibrium Sequences
of Pressure-Truncated Polytropes

We expect the content of this chapter — which examines the relative stability of bipolytropes — to parallel in many ways the content of an accompanying chapter in which we have successfully analyzed the relative stability of pressure-truncated polytopes. Figure 1, shown here on the right, has been copied from a closely related discussion. The curves show the mass-radius relationship for pressure-truncated model sequences having a variety of polytropic indexes, as labeled, over the range $1 \le n \le 6$. (Another version of this figure includes the isothermal sequence.) On each sequence for which $~n \ge 3$, the green filled circle identifies the model with the largest mass. We have shown analytically that the oscillation frequency of the fundamental-mode of radial oscillation is precisely zero for each one of these maximum-mass models. As a consequence, we know that each green circular marker identifies the point along its associated sequence that separates dynamically stable (larger radii) from dynamically unstable (smaller radii) models.

In each case, the fundamental-mode oscillation frequency is precisely zero if, and only if, the adiabatic index governing expansions/contractions is related to the underlying structural polytropic index via the relation, $~\gamma_g = (n + 1)/n$, and if a constant surface-pressure boundary condition is imposed.

In another accompanying chapter, we have used purely analytic techniques to construct equilibrium sequences of spherically symmetric bipolytropes that have, $~(n_c,n_e) = (5,1)$. For a given choice of $~\mu_e/\mu_c$ — the ratio of the mean-molecular weight of envelope material to the mean-molecular weight of material in the core — a physically relevant sequence of models can be constructed by steadily increasing the value of the dimensionless radius at the core/envelope interface, $~\xi_i$, from zero to infinity. Figure 2, which has been copied from this separate chapter, shows how the fractional core mass, $\nu \equiv M_\mathrm{core}/M_\mathrm{tot}$, varies with the fractional core radius, $q \equiv r_\mathrm{core}/R$, along sequences having six different values of $~\mu_e/\mu_c$: 1 (blue diamonds), ½ (red squares), 0.345 (dark purple crosses), ⅓ (pink triangles), 0.309 (light green dashes), and ¼ (purple asterisks). Along each of the model sequences, points marked by solid-colored circles correspond to models whose interface parameter, $~\xi_i$, has one of three values: 0.5 (green circles), 1 (dark blue circles), or 3 (orange circles).

When modeling bipolytropes, the default expectation is that an increase in $\xi_i$ along a given sequence will correspond to an increase in the relative size — both the radius and the mass — of the core. As Figure 2 illustrates, this expectation is realized along the sequences marked by blue diamonds ($~\mu_e/\mu_c = 1$) and by red squares ($~\mu_e/\mu_c =$½). But the behavior is different along the other four illustrated sequences. For sufficiently large $~\xi_i$, the relative radius of the core begins to decrease. Furthermore, along sequences for which $~\mu_e/\mu_c < \tfrac{1}{3}$, eventually the fractional mass of the core reaches a maximum and, thereafter, decreases even as the value of $~\xi_i$ continues to increase. (Additional properties of these equilibrium sequences are discussed in yet another accompanying chapter.)

The principal question is: Along bipolytropic sequences, are maximum-mass models associated with the onset of dynamical instabilities?

## Planned Approach

Figure 2: Equilibrium Sequences of Bipolytropes with $~(n_c,n_e) = (5,1)$

Ideally we would like to answer the just-stated "principal question" using purely analytic techniques. But, to date, we have been unable to fully address the relevant issues analytically, even in what would be expected to be the simplest case:   bipolytropic models that have $~(n_c,n_e) = (0, 0)$. Instead, we will streamline the investigation a bit and proceed — at least initially — using a blend of techniques. We will investigate the relative stability of bipolytropic models having $~(n_c,n_e) = (5,1)$ whose equilibrium structures are completely defined analytically; then the eigenvectors describing radial modes of oscillation will be determined, one at a time, by solving the relevant LAWE(s) numerically. We are optimistic that this can be successfully accomplished because we have had experience numerically integrating the LAWE that governs the oscillation of:

A key reference throughout this investigation will be the paper by J. O. Murphy & R. Fiedler (1985b, Proc. Astr. Soc. of Australia, 6, 222). They studied Radial Pulsations and Vibrational Stability of a Sequence of Two Zone Polytropic Stellar Models. Specifically, their underlying equilibrium models were bipolytropes that have $~(n_c,n_e) = (1, 5)$. In an accompanying chapter, we describe in detail how Murphy & Fiedler obtained these equilibrium bipolytropic structures and detail some of their equilibrium properties.

Here are the steps we initially plan to take:

• Governing LAWEs:
• Identify the relevant LAWEs that govern the behavior of radial oscillations in the $~n_c = 5$ core and, separately, in the $~n_e = 1$ envelope. Check these LAWE specifications against the published work of Murphy & Fiedler (1985b).
• Determine the matching conditions that must be satisfied across the core/envelope interface. Be sure to take into account the critical interface jump conditions spelled out by P. Ledoux & Th. Walraven (1958), as we have already discussed in the context of an analysis of radial oscillations in zero-zero bipolytropes.
• Determine what surface boundary condition should be imposed on physically relevant LAWE solutions, i.e., on the physically relevant radial-oscillation eigenvectors.
• Initial Analysis:
• Choose a maximum-mass model along the bipolytropic sequence that has, for example, $~\mu_e/\mu_c = 1/4$. Hopefully, we will be able to identify precisely (analytically) where this maximum-mass model lies along the sequence. Yes! Our earlier analysis does provide an analytic prescription of the model that sits at the maximum-mass location along the chosen sequence.
• Solve the relevant eigenvalue problem for this specific model, initially for $~(\gamma_c, \gamma_e) = (6/5, 2)$ and initially for the fundamental mode of oscillation.

# Review of the Analysis by Murphy & Fiedler (1985b)

In the stability analysis presented by Murphy & Fiedler (1985b), the relevant polytropic indexes are, $~(n_c, n_e) = (1,5)$. Structural properties of the underlying equilibrium models have been reviewed in our accompanying discussion.

The Linear Adiabatic Wave Equation (LAWE) that is relevant to polytropic spheres may be written as,

 $~0 = \frac{d^2x}{d\xi^2} + \biggl[ 4 - (n+1) Q \biggr] \frac{1}{\xi} \cdot \frac{dx}{d\xi} + (n+1) \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_g } \biggr) \frac{\xi^2}{\theta} - \alpha Q\biggr] \frac{x}{\xi^2}$ where:    $~Q(\xi) \equiv - \frac{d\ln\theta}{d\ln\xi} \, ,$    $~\sigma_c^2 \equiv \frac{3\omega^2}{2\pi G\rho_c} \, ,$     and,     $~\alpha \equiv \biggl(3 - \frac{4}{\gamma_\mathrm{g}}\biggr)$
 See also … Accompanying chapter showing derivation and overlap with multiple classic papers: A. S. Eddington (1926), especially equation (127.6) on p. 188 — The Internal Constitution of Stars P. Ledoux & C. L. Pekeris (1941, ApJ, 94, 124) — Radial Pulsations of Stars M. Schwarzschild (1941, ApJ, 94, 245) — Overtone Pulsations for the Standard Model R. F. Christy (1966, Annual Reviews of Astronomy & Astrophysics, 4, 353) — Pulsation Theory J. P. Cox (1974, Reports on Progress in Physics, 37, 563) — Pulsating Stars Accompanying chapter detailing specific application to polytropes along with a couple of additional key references: M. Hurley, P. H. Roberts, & K. Wright (1966, ApJ, 143, 535) — The Oscillations of Gas Spheres Murphy & Fiedler (1985b) — Radial Pulsations and Vibrational Stability of a Sequence of Two Zone Polytropic Stellar Models

As we have detailed separately, the boundary condition at the center of a polytropic configuration is,

$~\frac{dx}{d\xi} \biggr|_{\xi=0} = 0 \, ;$

and the boundary condition at the surface of an isolated polytropic configuration is,

 $~\frac{d\ln x}{d\ln\xi}$ $~=$ $~- \alpha + \frac{\omega^2}{\gamma_g } \biggl( \frac{1}{4\pi G \rho_c } \biggr) \frac{\xi}{(-\theta^')}$         at         $~\xi = \xi_s \, .$

But this surface condition is not applicable to bipolytropes. Instead, let's return to the original, more general expression of the surface boundary condition:

 $~ \frac{d\ln x}{d\ln\xi}\biggr|_s$ $~=$ $~- \alpha + \frac{\omega^2 R^3}{\gamma_g GM_\mathrm{tot}} \, .$

Utilizing an accompanying discussion, let's examine the frequency normalization used by Murphy & Fiedler (1985b) (see the top of the left-hand column on p. 223):

 $~\Omega^2$ $~\equiv$ $~ \omega^2 \biggl[ \frac{R^3}{GM_\mathrm{tot}} \biggr]$ $~=$ $~ \omega^2 \biggl[ \frac{3}{4\pi G \bar\rho} \biggr] = \omega^2 \biggl[ \frac{3}{4\pi G \rho_c} \biggr] \frac{\rho_c}{\bar\rho} = \frac{3\omega^2}{(n_c+1)} \biggl[ \frac{(n_c+1)}{4\pi G \rho_c} \biggr] \frac{\rho_c}{\bar\rho}$ $~=$ $~ \frac{3\omega^2}{(n_c+1)} \biggl[ \frac{a_n^2\rho_c}{P_c} \cdot \theta_c \biggr] \frac{\rho_c}{\bar\rho} = \frac{3\gamma}{(n_c+1)} \frac{\rho_c}{\bar\rho} \biggl[ \frac{a_n^2\rho_c}{P_c} \cdot \frac{\omega^2 \theta_c}{\gamma} \biggr] \, .$

For a given radial quantum number, $~k$, the factor inside the square brackets in this last expression is what Murphy & Fiedler (1985b) refer to as $~\omega^2_k \theta_c$. Keep in mind, as well, that, in the notation we are using,

 $~\sigma_c^2$ $~\equiv$ $~\frac{3\omega^2}{2\pi G \rho_c}$ $~\Rightarrow ~~~ \sigma_c^2$ $~=$ $~ \biggl( \frac{2\bar\rho}{\rho_c}\biggr) \Omega^2 = \frac{6\gamma}{(n_c+1)} \biggl[ \frac{a_n^2\rho_c}{P_c} \cdot \frac{\omega^2 \theta_c}{\gamma} \biggr] = \frac{6\gamma}{(n_c+1)} \biggl[ \omega_k^2 \theta_c \biggr] \, .$

This also means that the surface boundary condition may be rewritten as,

 $~ \frac{d\ln x}{d\ln\xi}\biggr|_s$ $~=$ $~\frac{\Omega^2}{\gamma_g } - \alpha \, .$

Let's apply these relations to the core and envelope, separately.

## Envelope Layers With n = 5

The LAWE for n = 5 structures is, then,

 $~0$ $~=$ $~ \frac{d^2x}{d\eta^2} + \biggl[ 4 - 6Q_5 \biggr] \frac{1}{\eta} \cdot \frac{dx}{d\eta} + 6 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{env} } \biggr) \frac{\eta^2}{\phi} - \alpha_\mathrm{env} Q_5\biggr] \frac{x}{\eta^2}$

where,

 $~Q_5$ $~\equiv$ $~- \frac{d\ln\phi}{d\ln\eta} \, .$
 $~\phi$ $~=$ $~\frac{B_0^{-1}\sin\Delta}{\eta^{1/2}(3-2\sin^2\Delta)^{1/2}} \, ,$

and,

 $~\frac{d\phi}{d\eta}$ $~=$ $~ \frac{B_0^{-1}[3\cos\Delta-3\sin\Delta + 2\sin^3\Delta] }{2\eta^{3/2}(3-2\sin^2\Delta)^{3/2}} \, .$

where $~A_0$ is a "homology factor," $~B_0$ is an overall scaling coefficient, and we have introduced the notation,

$~\Delta \equiv \ln(A_0\eta)^{1/2} = \frac{1}{2} (\ln A_0 + \ln\eta) \, .$

Hence,

 $~Q_5$ $~=$ $~ - \eta \biggl[ \frac{\eta^{1/2}(3-2\sin^2\Delta)^{1/2}}{B_0^{-1}\sin\Delta} \biggr] \frac{B_0^{-1}[3\cos\Delta-3\sin\Delta + 2\sin^3\Delta] }{2\eta^{3/2}(3-2\sin^2\Delta)^{3/2}}$ $~=$ $~ \frac{ 3\sin\Delta - 3\cos\Delta - 2\sin^3\Delta }{2 \sin\Delta (3-2\sin^2\Delta)} \, .$

And,

 $~0$ $~=$ $~ \frac{d^2x}{d\eta^2} ~+~ \biggl[ 4 + \frac{ 3(3\cos\Delta - 3\sin\Delta + 2\sin^3\Delta) }{ \sin\Delta (3-2\sin^2\Delta)} \biggr] \frac{1}{\eta} \cdot \frac{dx}{d\eta} ~+~ \biggl[ \biggl( \frac{\sigma_c^2}{\gamma_\mathrm{env} } \biggr) \frac{B_0 \eta^{1/2}(3-2\sin^2\Delta)^{1/2}}{\sin\Delta} ~+~ \frac{ 3\alpha_\mathrm{env} (3\cos\Delta -3\sin\Delta + 2\sin^3\Delta )}{\eta^2 \sin\Delta (3-2\sin^2\Delta)}\biggr] x$ $~=$ $~ \frac{d^2x}{d\eta^2} ~+~ \biggl[ 4 ~+~ \frac{ 3(3\cos\Delta - \tfrac{3}{2}\sin\Delta - \tfrac{1}{2}\sin3\Delta) }{ \sin\Delta (2 + \cos2\Delta)} \biggr] \frac{1}{\eta} \cdot \frac{dx}{d\eta} ~+~ \biggl[\omega^2_k \theta_c \biggl( \frac{\gamma_g}{\gamma_\mathrm{env} } \biggr) \frac{B_0 \eta^{1/2}(2 + \cos2\Delta)^{1/2}}{\sin\Delta} ~+~ \frac{ 3\alpha_\mathrm{env} (3\cos\Delta -\tfrac{3}{2}\sin\Delta - \tfrac{1}{2}\sin3\Delta )}{\eta^2 \sin\Delta (2 + \cos2\Delta)}\biggr] x \, ,$

which matches the expression presented by Murphy & Fiedler (1985b) (see middle of the left column on p. 223 of their article) if we set $~\theta_c = 1$ and $~\gamma_g/\gamma_\mathrm{env} = 1$.

## Surface Boundary Condition

Next, pulling from our accompanying discussion of the stability of polytropes and an accompanying table that details the properties of $~(n_c, n_e) = (1, 5)$ bipolytropes, the surface boundary condition is,

 $~ \frac{d\ln x}{d\ln\eta}\biggr|_s$ $~=$ $~- \biggl(\frac{\gamma_g}{\gamma_\mathrm{env}}\biggr) \alpha + \frac{\omega^2 R^3}{\gamma_\mathrm{env} GM_\mathrm{tot}}$ $~\Rightarrow ~~~ \frac{d\ln x}{d\ln\eta}\biggr|_s + \biggl(\frac{\gamma_g}{\gamma_\mathrm{env}}\biggr) \alpha$ $~=$ $~ \frac{\omega^2 (R_s^*)^3}{\gamma_\mathrm{env} GM^*_\mathrm{tot}} \biggl( \frac{K_c}{G}\biggr)^{3 / 2}\biggl( \frac{K_c}{G}\biggr)^{-3 / 2} \frac{1}{\rho_0}$ $~=$ $~ \frac{\omega^2 }{\gamma_\mathrm{env} G\rho_0 } \biggl[ (2\pi)^{-1/2} \xi_i e^{2(\pi - \Delta_i)} \biggr]^3 \biggl[ \biggl( \frac{3}{2\pi} \biggr)^{1/2} \sin\xi_i \biggl( \frac{3}{\sin^2\Delta_i} - 2 \biggr)^{1/2} e^{(\pi - \Delta_i)} \biggr]^{-1} \biggl( \frac{\mu_e}{\mu_c}\biggr)$ $~=$ $~ \frac{\omega^2 }{\gamma_\mathrm{env}(2\pi G\rho_0)} \biggl( \frac{\mu_e}{\mu_c}\biggr) \frac{1}{\sqrt{3}} \biggl[ \frac{\xi_i^2}{\theta_i} \biggr] \biggl( \frac{3}{\sin^2\Delta_i} - 2 \biggr)^{-1 / 2} e^{5(\pi - \Delta_i)}$ $~=$ $~ \frac{\omega^2 }{\gamma_\mathrm{env}(2\pi G\rho_0)} \biggl( \frac{\mu_e}{\mu_c}\biggr) \frac{e^{5\pi}}{\sqrt{3}} \biggl[ \frac{\xi_i^2}{\theta_i} \biggr] \xi_i^{1 / 2}B\theta_i (\xi_i A)^{-5/2}$ $~=$ $~ \frac{\omega^2 }{\gamma_\mathrm{env}(2\pi G\rho_0)} \biggl( \frac{\mu_e}{\mu_c}\biggr) \frac{B e^{5\pi}}{\sqrt{3} ~A^{5 / 2}}$ $~=$ $~ \frac{2\omega_k^2 \theta_c}{(n_c+1)} \biggl( \frac{\mu_e}{\mu_c}\biggr) \frac{B e^{5\pi}}{\sqrt{3} ~A^{5 / 2}} \, .$

After acknowledging that, in their specific stability analysis, $~\theta_c = 1$, $~n_c = 1$, and $~\mu_e/\mu_c = 1$, this right-hand-side expression matches the equivalent term published by Murphy & Fiedler (1985b) (see the bottom of the left-hand column on p. 223).

## Core Layers With n = 1

And for n = 1 structures the LAWE is,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl[ 4 - 2 Q_1 \biggr] \frac{1}{\xi} \cdot \frac{dx}{d\xi} + 2 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{core} } \biggr) \frac{\xi^2}{\theta} - \alpha_\mathrm{core} Q_1\biggr] \frac{x}{\xi^2}$

where,

 $~Q_1$ $~\equiv$ $~- \frac{d\ln\theta}{d\ln\xi} \, .$

Given that, for $~n = 1$ polytropic structures,

$\theta(\xi) = \frac{\sin\xi}{\xi}$       and       $\frac{d\theta}{d\xi} = \biggl[ \frac{\cos\xi}{\xi}- \frac{\sin\xi}{\xi^2}\biggr]$

we have,

 $~Q_1$ $~=$ $~ - \frac{\xi^2}{\sin\xi} \biggl[ \frac{\cos\xi}{\xi}- \frac{\sin\xi}{\xi^2}\biggr]$ $~=$ $~ 1 - \xi\cot\xi \, .$

Hence, the governing LAWE for the core is,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl[ 4 - 2 ( 1 - \xi\cot\xi ) \biggr] \frac{1}{\xi} \cdot \frac{dx}{d\xi} + 2 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{core} } \biggr) \frac{\xi^3}{\sin\xi} - \alpha_\mathrm{core} ( 1 - \xi\cot\xi )\biggr] \frac{x}{\xi^2}$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl[ 1 + \xi\cot\xi \biggr] \frac{2}{\xi} \cdot \frac{dx}{d\xi} + 2 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{core} } \biggr) \frac{\xi^3}{\sin\xi} - \alpha_\mathrm{core} ( 1 - \xi\cot\xi )\biggr] \frac{x}{\xi^2} \, .$

This can be rewritten as,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \frac{2}{\xi} \biggl[ 1 + \xi\cot\xi \biggr]\frac{dx}{d\xi} + \biggl[ \biggl( \frac{\sigma_c^2}{3\gamma_\mathrm{core} } \biggr) \frac{\xi}{\sin\xi} + \frac{2 \alpha_\mathrm{core} ( \xi\cos\xi - \sin\xi) }{\xi^2 \sin\xi} \biggr] x$ $~=$ $~ \frac{d^2x}{d\xi^2} + \frac{2}{\xi} \biggl[ 1 + \xi\cot\xi \biggr]\frac{dx}{d\xi} + \biggl[ \frac{\gamma_g}{\gamma_\mathrm{core}}\biggl( \omega_k^2 \theta_c \biggr) \frac{\xi}{\sin\xi} + \frac{2 \alpha_\mathrm{core} ( \xi\cos\xi - \sin\xi) }{\xi^2 \sin\xi} \biggr] x \, ,$

which matches the expression presented by Murphy & Fiedler (1985b) (see middle of the left column on p. 223 of their article) if we set $~\theta_c = 1$ and $~\gamma_g/\gamma_\mathrm{core} = 1$. This LAWE also appears in our separate discussion of radial oscillations in n = 1 polytropic spheres.

## Interface Conditions

Here, we will simply copy the discussion already provided in the context of our attempt to analyze the stability of $~(n_c, n_e) = (0, 0)$ bipolytropes; specifically, we will draw from STEP 4: in the Piecing Together subsection. Following the discussion in §§57 & 58 of P. Ledoux & Th. Walraven (1958), the proper treatment is to ensure that fractional perturbation in the gas pressure (see their equation 57.31),

 $~\frac{\delta P}{P}$ $~=$ $~- \gamma x \biggl( 3 + \frac{d\ln x}{d\ln \xi} \biggr) \, ,$

is continuous across the interface. That is to say, at the interface $~(\xi = \xi_i)$, we need to enforce the relation,

 $~0$ $~=$ $~\biggl[ \gamma_c x_\mathrm{core} \biggl( 3 + \frac{d\ln x_\mathrm{core}}{d\ln \xi} \biggr) - \gamma_e x_\mathrm{env} \biggl( 3 + \frac{d\ln x_\mathrm{env}}{d\ln \xi} \biggr)\biggr]_{\xi=\xi_i}$ $~=$ $~\gamma_e \biggl[ \frac{\gamma_c}{\gamma_e} \biggl( 3 + \frac{d\ln x_\mathrm{core}}{d\ln \xi} \biggr) - \biggl( 3 + \frac{d\ln x_\mathrm{env}}{d\ln \xi} \biggr)\biggr]_{\xi=\xi_i}$ $~\Rightarrow~~~ \frac{d\ln x_\mathrm{env}}{d\ln \xi} \biggr|_{\xi=\xi_i}$ $~=$ $~3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \biggl( \frac{d\ln x_\mathrm{core}}{d\ln \xi} \biggr)_{\xi=\xi_i} \, .$

In the context of this interface-matching constraint (see their equation 62.1), P. Ledoux & Th. Walraven (1958) state the following:   In the static (i.e., unperturbed equilibrium) modeldiscontinuities in $~\rho$ or in $~\gamma$ might occur at some [radius]. In the first case — that is, a discontinuity only in density, while $~\gamma_e = \gamma_c$ — the interface conditions imply the continuity of $~\tfrac{1}{x} \cdot \tfrac{dx}{d\xi}$ at that [radius]. In the second case — that is, a discontinuity in the adiabatic exponent — the dynamical condition may be written as above. This implies a discontinuity of the first derivative at any discontinuity of $~\gamma$.

The algorithm that Murphy & Fiedler (1985b) used to "… [integrate] through each zone …" was designed "… with continuity in $~x$ and $~dx/d\xi$ being imposed at the interface …" Given that they set $~\gamma_c = \gamma_e = 5/3$, their interface matching condition is consistent with the one prescribed by P. Ledoux & Th. Walraven (1958).

## Our Numerical Integration

Let's try to integrate this bipolytrope's LAWE from the center, outward, using as a guideline an accompanying Numerical Integration outline. Generally, for any polytropic index, the relevant LAWE can be written in the form,

 $~\theta_i {x_i}$ $~=$ $~- \biggl[\mathcal{A} \biggr] \frac{x_i'}{\xi_i} - \frac{(n+1)}{6} \biggl[ \mathcal{B} \biggr] x_i$

where,

 $~\mathcal{A}$ $~\equiv$ $~ 4\theta_i - (n+1)\xi_i (- \theta^')_i = \theta_i [ 4 - (n+1)Q_i]$ $~\mathcal{B}$ $~\equiv$ $~ \frac{\sigma_c^2}{\gamma_g} - 2\alpha \biggl(- \frac{3\theta^'}{\xi} \biggr)_i = \mathfrak{F} + 2\alpha \biggl[ 1 - \biggl(- \frac{3\theta^'}{\xi} \biggr)_i \biggr] = \mathfrak{F} + 2\alpha \biggl[ 1 - \frac{3\theta_i}{\xi_i^2} \cdot Q_i \biggr]$ $~ \mathfrak{F}$ $~\equiv$ $~ \biggl[ \frac{\sigma_c^2}{\gamma_g} - 2\alpha\biggr] = \biggl[ \frac{\sigma_c^2}{\gamma_g} - 2\biggl(3 - \frac{4}{\gamma_g} \biggr) \biggr] = \biggl[ \frac{(8 + \sigma_c^2)}{\gamma_g} - 6\biggr]$ $~\Rightarrow~~~$ $~ \sigma_c^2 = \gamma_g (\mathfrak{F} + 6) -8 \, .$

This leads to a discrete, finite-difference representation of the form,

 $~x_+ \biggl[2\theta_i + \frac{\delta\xi}{\xi_i} \cdot \mathcal{A}\biggr]$ $~=$ $~ x_- \biggl[\frac{\delta\xi }{\xi_i} \cdot \mathcal{A} - 2\theta_i\biggr] + x_i\biggl\{4\theta_i - \frac{(\delta\xi)^2(n+1)}{3}\cdot \mathcal{B} \biggr\} \, .$

This provides an approximate expression for $~x_+ \equiv x_{i+1}$, given the values of $~x_- \equiv x_{i-1}$ and $~x_i$; this works for all zones, $~i = 3 \rightarrow N$ as long as the center of the configuration is denoted by the grid index, $~i=1$. Note that,

 $~\delta\xi$ $~\equiv$ $~\frac{\xi_\mathrm{max}}{(N - 1)}$ and $~\xi_i$ $~=$ $~(i-1)\delta\xi \, .$

In order to kick-start the integration, we will set the displacement function value to $~x_1 = 1$ at the center of the configuration $~(\xi_1 = 0)$, then we will draw on the derived power-series expression to determine the value of the displacement function at the first radial grid line, $~\xi_2 = \delta\xi$, away from the center. Specifically, we will set,

 $~ x_2$ $~=$ $~ x_1 \biggl[ 1 - \frac{(n+1) \mathfrak{F} (\delta\xi)^2}{60} \biggr] \, .$

### Integration Through the n = 1 Core

For an $~n = 1$ core, we have,

$\theta_i = \frac{\sin\xi_i}{\xi_i}$       and       $Q_i = 1 - \xi_i \cot\xi_i \, .$

Hence,

 $~\mathcal{A}_\mathrm{core}$ $~=$ $~ \frac{\sin\xi_i}{\xi_i} \biggl[ 4 - 2(1 - \xi_i \cot\xi_i) \biggr] = \frac{2\sin\xi_i}{\xi_i} \biggl[ 1 + \xi_i \cot\xi_i \biggr]$ $~\mathcal{B}_\mathrm{core}$ $~=$ $~ \mathfrak{F}_\mathrm{core} + 2\alpha_\mathrm{core} \biggl[ 1 - \frac{3\theta_i}{\xi_i^2} \cdot Q_i \biggr] = \mathfrak{F}_\mathrm{core} + 2\alpha_\mathrm{core} \biggl[ 1 - \frac{3\sin\xi_i}{\xi_i^3} \biggl( 1 - \xi_i \cot\xi_i \biggr)\biggr] \, .$

So, first we choose a value of $~\sigma_c^2$ and $~\gamma_c$, which means,

 $~ \mathfrak{F}_\mathrm{core}$ $~\equiv$ $~ \biggl[ \frac{(8 + \sigma_c^2)}{\gamma_c} - 6\biggr]$

Then, moving from the center of the configuration, outward to the interface at $~\xi_i = \xi_\mathrm{interface} ~~ \Rightarrow ~~\delta\xi = \xi_\mathrm{interface}/(N-1)$, we have,

 $~x_1$ $~=$ $~1 \, ,$ $~ x_2$ $~=$ $~ x_1 \biggl[ 1 - \frac{\mathfrak{F}_\mathrm{core} (\delta\xi)^2}{30} \biggr] \, ,$ for $~i = 2 \rightarrow N \, ,$        $~x_{i+1} \biggl[2\theta_i + \frac{\delta\xi}{\xi_i} \cdot \mathcal{A}_\mathrm{core} \biggr]$ $~=$ $~ x_{i-1} \biggl[\frac{\delta\xi }{\xi_i} \cdot \mathcal{A}_\mathrm{core} - 2\theta_i\biggr] + x_i\biggl\{4\theta_i - \frac{(\delta\xi)^2(n+1)}{3}\cdot \mathcal{B}_\mathrm{core} \biggr\} \, .$

At the interface — that is, when $~i=N$ — the logarithmic slope of the displacement function is,

 $~\frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface}$ $~\approx$ $~ \frac{\xi_N}{x_N} \cdot \frac{(x_{N+1} - x_{N-1})}{2\delta\xi} \, .$

### Interface

Keep in mind that, as has been detailed in the accompanying equilibrium structure chapter, for $~(n_c, n_e) = (1, 5)$ bipolytropes,

 $~r^*$ $~=$ $~\biggl( \frac{1}{2\pi}\biggr)^{1 / 2} \xi \, ,$ for, $~0 \le \xi \le \xi_\mathrm{interface} \, .$ $~r^*$ $~=$ $~\biggl[ \biggl( \frac{\mu_e}{\mu_c}\biggr)^{-1} \biggl( \frac{3}{2\pi}\biggr)^{1 / 2} \biggr] \eta \, ,$ for, $~\eta_\mathrm{interface} \le \eta \le \eta_s \, ;$ $~\eta_s$ $~=$ $~ \frac{1}{\sqrt{3}}\biggl( \frac{\mu_e}{\mu_c}\biggr) \xi_s = \frac{1}{\sqrt{3}}\biggl( \frac{\mu_e}{\mu_c}\biggr) \biggl[ \xi e^{2(\pi - \Delta)} \biggr]_\mathrm{interface} \, .$

We now need to determine what the slope is at the interface, viewed from the perspective of the envelope. From above, we deduce that,

 $~\frac{d\ln y}{d\ln \eta} \biggr|_\mathrm{interface}$ $~=$ $~3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \, .$

Hence, letting the subscript "1" denote the interface location as viewed from the envelope, we have,

 $~\frac{\eta_1}{y_1} \cdot \frac{(y_2 - y_0)}{ (\eta_2 - \eta_0)}$ $~=$ $~3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \, .$ $~\Rightarrow ~~~ y_0$ $~=$ $~y_2 - \frac{2 (\delta\eta) y_1}{\eta_1} \biggl\{ 3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \biggr\} \, .$

### Integration Through the n = 5 Envelope

For an $~n = 5$ envelope, we have,

$\phi_i = \frac{B_0^{-1}\sin\Delta}{\eta^{1/2}(3-2\sin^2\Delta)^{1/2}}$       and       $Q_i = - \frac{d\ln\phi}{d\ln\eta} = \frac{ 3\sin\Delta - 3\cos\Delta - 2\sin^3\Delta }{2 \sin\Delta (3-2\sin^2\Delta)}\, ,$

where $~A_0$ is a "homology factor," $~B_0$ is an overall scaling coefficient, and we have introduced the notation,

$~\Delta \equiv \ln(A_0\eta)^{1/2} = \frac{1}{2} (\ln A_0 + \ln\eta) \, .$

Hence,

 $~\mathcal{A}_\mathrm{env}$ $~\equiv$ $~ \phi_i [ 4 - (n+1)Q_i]$ $~=$ $~ \frac{B_0^{-1}\sin\Delta}{\eta^{1/2}(3-2\sin^2\Delta)^{1/2}}\biggl\{ 4 ~-~ 6 \biggl[ \frac{ 3\sin\Delta - 3\cos\Delta - 2\sin^3\Delta }{2 \sin\Delta (3-2\sin^2\Delta)} \biggr] \biggr\}$ $~\mathcal{B}_\mathrm{env}$ $~\equiv$ $~ \frac{\sigma_c^2}{\gamma_e} - 2\alpha_\mathrm{env} \biggl(- \frac{3\phi^'}{\eta} \biggr)_i$ $~=$ $~ \frac{1}{\gamma_e}\biggl[ \gamma_c (\mathfrak{F}_\mathrm{core} + 6) -8 \biggr] - 2\biggl[ 3 - \frac{4}{\gamma_e}\biggr] Q_i \biggl( \frac{3\phi_i }{\eta_i^2} \biggr)$ $~=$ $~ \frac{\gamma_c}{\gamma_e}\biggl[ \mathfrak{F}_\mathrm{core} + 6 -\frac{8}{\gamma_c} \biggr] - 6\biggl[ 3 - \frac{4}{\gamma_e}\biggr] \frac{B_0^{-1}\sin\Delta}{\eta^{5/2}(3-2\sin^2\Delta)^{1/2}} \biggl[ \frac{ 3\sin\Delta - 3\cos\Delta - 2\sin^3\Delta }{2 \sin\Delta (3-2\sin^2\Delta)} \biggr]$ $~=$ $~ \frac{\gamma_c}{\gamma_e}\biggl[ \mathfrak{F}_\mathrm{core} + 6 -\frac{8}{\gamma_c} \biggr] - 3B_0^{-1}\biggl[ 3 - \frac{4}{\gamma_e}\biggr] \biggl[ \frac{ 3\sin\Delta - 3\cos\Delta - 2\sin^3\Delta }{ \eta^{5/2}(3-2\sin^2\Delta)^{3 / 2}} \biggr] \, .$

This leads to a discrete, finite-difference representation of the form,

 $~y_+ \biggl[2\phi_i + \frac{\delta\eta}{\eta_i} \cdot \mathcal{A}_\mathrm{env} \biggr]$ $~=$ $~ y_- \biggl[\frac{\delta\eta }{\eta_i} \cdot \mathcal{A}_\mathrm{env} - 2\phi_i\biggr] + y_i\biggl[4\phi_i - 2(\delta\eta)^2 \cdot \mathcal{B}_\mathrm{env} \biggr]$

This provides an approximate expression for $~y_+ \equiv y_{i+1}$, given the values of $~y_- \equiv y_{i-1}$ and $~y_i$; this works for all zones, $~i = 3 \rightarrow M$ as long as the interface between the core and the envelope of the configuration is denoted by the grid index, $~i=1$. Note that,

 $~\delta\eta$ $~\equiv$ $~\frac{\eta_\mathrm{surf}- \eta_\mathrm{interface} }{M - 1}$ and $~\eta_i$ $~=$ $~\eta_\mathrm{interface} + (i-1)\delta\eta \, .$

At the interface, we need special treatment in order to ensure that both the amplitude and the first derivative of the displacement function behave properly. Specifically, when $~i = 1$, we must set, $~y_1 = x_N$ and $~\eta_1 = (\mu_e/\mu_c)\xi_N/\sqrt{3}$. Then the value of $~y_2$ is obtained from the expression,

 $~y_2 \biggl[2\phi_1 + \frac{\delta\eta}{\eta_1} \cdot \mathcal{A}_\mathrm{env} \biggr]$ $~=$ $~ y_0 \biggl[\frac{\delta\eta }{\eta_1} \cdot \mathcal{A}_\mathrm{env} - 2\phi_1\biggr] + y_1\biggl\{4\phi_1 - 2(\delta\eta)^2 \cdot \mathcal{B}_\mathrm{env} \biggr\}$ $~=$ $~ y_1\biggl[ 4\phi_1 - 2(\delta\eta)^2 \cdot \mathcal{B}_\mathrm{env} \biggr] + \biggl[\frac{\delta\eta }{\eta_1} \cdot \mathcal{A}_\mathrm{env} - 2\phi_1\biggr] \biggl\{ y_2 ~-~ \frac{2 (\delta\eta) y_1}{\eta_1} \biggl[ 3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \biggr] \biggr\}$ $~\Rightarrow~~~y_2 \biggl[4\phi_1 \biggr]$ $~=$ $~ y_1\biggl[ 4\phi_1 - 2(\delta\eta)^2 \cdot \mathcal{B}_\mathrm{env} \biggr] ~-~ \frac{2 (\delta\eta) y_1}{\eta_1} \biggl[\frac{\delta\eta }{\eta_1} \cdot \mathcal{A}_\mathrm{env} - 2\phi_1\biggr] \biggl\{3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \biggr\}$ $~\Rightarrow~~~\frac{y_2}{y_1} \biggl[\phi_1 \biggr]$ $~=$ $~ \biggl[ \phi_1 - \frac{(\delta\eta)^2}{2} \cdot \mathcal{B}_\mathrm{env} \biggr] ~-~ \frac{ (\delta\eta) }{2\eta_1} \biggl[\frac{\delta\eta }{\eta_1} \cdot \mathcal{A}_\mathrm{env} - 2\phi_1\biggr] \biggl\{3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \cdot \frac{d\ln x}{d\ln\xi}\biggr|_\mathrm{interface} \biggr\} \, .$

# Regroup

## Foundation

In an accompanying discussion, we derived the so-called,

 $~ \frac{d^2x}{dr_0^2} + \biggl[\frac{4}{r_0} - \biggl(\frac{g_0 \rho_0}{P_0}\biggr) \biggr] \frac{dx}{dr_0} + \biggl(\frac{\rho_0}{\gamma_\mathrm{g} P_0} \biggr)\biggl[\omega^2 + (4 - 3\gamma_\mathrm{g})\frac{g_0}{r_0} \biggr] x = 0$

whose solution gives eigenfunctions that describe various radial modes of oscillation in spherically symmetric, self-gravitating fluid configurations. Assuming that the underlying equilibrium structure is that of a bipolytrope having $~(n_c, n_e) = (1, 5)$, it makes sense to adopt the normalizations used when defining the equilibrium structure, namely,

 $~\rho^*$ $~\equiv$ $~\frac{\rho_0}{\rho_c}$ ; $~r^*$ $~\equiv$ $~\frac{r_0}{(K_c/G)^{1/2}}$ $~P^*$ $~\equiv$ $~\frac{P_0}{K_c\rho_c^{2}}$ ; $~M_r^*$ $~\equiv$ $~\frac{M(r_0)}{\rho_c (K_c/G)^{3/2}}$ $~H^*$ $~\equiv$ $~\frac{H}{K_c\rho_c}$ .

We note as well that,

 $~g_0$ $~=$ $~\frac{GM(r_0)}{r_0^2}$ $~=$ $~ G \biggl[ M_r^* \rho_c \biggl( \frac{K_c}{G}\biggr)^{3 / 2} \biggr] \biggl[ r^*\biggl( \frac{K_c}{G}\biggr)^{1 / 2} \biggr]^{-2}$ $~=$ $~ \frac{ M_r^*}{(r^*)^2}\biggl[ G\rho_c \biggl( \frac{K_c}{G}\biggr)^{1 / 2} \biggr] \, .$

Hence, multiplying the LAWE through by $~(K_c/G)$ gives,

 $~0$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl[\frac{4}{r^*} -\biggl( \frac{K_c}{G} \biggr)^{1 / 2}\biggl(\frac{g_0 \rho_0}{P_0}\biggr) \biggr] \frac{dx}{dr*} + \biggl( \frac{K_c}{G} \biggr)\biggl(\frac{\rho_0}{\gamma_\mathrm{g} P_0} \biggr)\biggl[\omega^2 + (4 - 3\gamma_\mathrm{g})\frac{g_0}{r_0} \biggr] x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ \frac{4}{r^*} -\biggl( \frac{K_c}{G} \biggr)^{1 / 2}\biggl(\frac{\rho_c \rho^*}{P^* K_c \rho_c^2}\biggr)\frac{ M_r^*}{(r^*)^2}\biggl[ G\rho_c \biggl( \frac{K_c}{G}\biggr)^{1 / 2} \biggr] \biggr\} \frac{dx}{dr*} + \biggl( \frac{K_c}{G} \biggr)\biggl(\frac{\rho^*\rho_c}{\gamma_\mathrm{g} P^* K_c \rho_c^2} \biggr)\biggl\{ \omega^2 + (4 - 3\gamma_\mathrm{g})\frac{1}{r^*} \biggl(\frac{G}{K_c}\biggr)^{1 / 2}\frac{ M_r^*}{(r^*)^2}\biggl[ G\rho_c \biggl( \frac{K_c}{G}\biggr)^{1 / 2} \biggr]\biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ \frac{4}{r^*} -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)^2}\biggr\} \frac{dx}{dr*} + \biggl( \frac{1}{\gamma_\mathrm{g}G\rho_c} \biggr)\biggl(\frac{\rho^*}{ P^* } \biggr)\biggl\{ \omega^2 + (4 - 3\gamma_\mathrm{g})\frac{1}{r^*} \frac{ M_r^*}{(r^*)^2}\biggl[ G\rho_c \biggr]\biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ \frac{4}{r^*} -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)^2}\biggr\} \frac{dx}{dr*} + \biggl(\frac{\rho^*}{ P^* } \biggr)\biggl\{ \frac{\omega^2}{\gamma_\mathrm{g} G\rho_c} + \biggl(\frac{4}{\gamma_\mathrm{g}} - 3\biggr)\frac{1}{r^*} \frac{ M_r^*}{(r^*)^2}\biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ 4 -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)}\biggr\}\frac{1}{r^*} \frac{dx}{dr*} + \biggl(\frac{\rho^*}{ P^* } \biggr)\biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~\frac{\alpha_\mathrm{g} M_r^*}{(r^*)^3}\biggr\} x \, .$

## Profile

Now, referencing the derived bipolytropic model profile, we should incorporate the following relations:

 Variable Throughout the Core $0 \le r^* \le \frac{\xi_i}{\sqrt{2\pi}}$ Throughout the Envelope† $\frac{\xi_i}{\sqrt{2\pi}} \le r^* \le \frac{\xi_i e^{2(\pi - \Delta_i)}}{\sqrt{2\pi}}$ Plotted Profiles $\xi_i = 0.5$ $\xi_i = 1.0$ $\xi_i = 3.0$ $\xi = \sqrt{2\pi}~r^*$ $\eta = \biggl( \frac{\mu_e}{\mu_c} \biggr) \biggl(\frac{2\pi}{3}\biggr)^{1 / 2}~r^*$ $~\rho^*$ $\frac{\sin\xi}{\xi}$ $\biggl( \frac{\mu_e}{\mu_c} \biggr) \theta_i [\phi(\eta)]^5$ $~P^*$ $\biggl( \frac{\sin\xi}{\xi} \biggr)^2$ $\theta^{2}_i [\phi(\eta)]^{6}$ $~M_r^*$ $\biggl( \frac{2}{\pi}\biggr)^{1/2} (\sin\xi - \xi\cos\xi)$ $\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2} \biggl( \frac{2\cdot 3^3 }{\pi} \biggr)^{1/2} \theta_i \biggl(-\eta^2 \frac{d\phi}{d\eta} \biggr)$ †In order to obtain the various envelope profiles, it is necessary to evaluate $~\phi(\eta)$ and its first derivative using the information presented in Step 6 of our accompanying discussion.

Therefore, throughout the core we have,

 $~\frac{\rho^*}{P^*}$ $~=$ $~\frac{\xi}{\sin\xi} \, ;$ $~\frac{M_r^*}{r^*}$ $~=$ $~\frac{\sqrt{2\pi}}{\xi}\biggl( \frac{2}{\pi}\biggr)^{1/2} (\sin\xi - \xi\cos\xi) = \frac{2\sin\xi}{\xi} (1 - \xi\cot\xi) \, .$

In which case the governing LAWE throughout the core is,

 $~0$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ 4 -2(1-\xi\cot\xi )\biggr\}\frac{1}{r^*} \frac{dx}{dr*} + \frac{\xi}{\sin\xi} \biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~\alpha_\mathrm{g}~\frac{4\pi \sin\xi}{\xi^3} (1 - \xi\cot\xi) \biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ 4 -2(1-\xi\cot\xi )\biggr\}\frac{1}{r^*} \frac{dx}{dr*} + \frac{2\pi \xi}{\sin\xi} \biggl\{ \frac{\sigma_c^2}{3\gamma_\mathrm{g}} ~+~\frac{2\alpha_\mathrm{g}}{\xi^3} \biggl(\xi\cos\xi - \sin\xi \biggr) \biggr\} x \, .$

Next, throughout the envelope we have,

 $~\frac{\rho^*}{P^*}$ $~=$ $~ \biggl( \frac{\mu_e}{\mu_c} \biggr) \theta_i [\phi(\eta)]^5 \biggl\{\theta^{2}_i [\phi(\eta)]^{6}\biggr\}^{-1} = \biggl( \frac{\mu_e}{\mu_c} \biggr) \frac{1}{\theta_i \phi(\eta) } \, ;$ $~\frac{M_r^*}{r^*}$ $~=$ $~ \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2} \biggl( \frac{2\cdot 3^3 }{\pi} \biggr)^{1/2} \theta_i \biggl(-\eta^2 \frac{d\phi}{d\eta} \biggr) \biggl\{ \frac{1}{\eta} \biggl( \frac{\mu_e}{\mu_c} \biggr) \biggl(\frac{2\pi}{3}\biggr)^{1 / 2} \biggr\} = 6\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-1} \theta_i \biggl(-\eta \frac{d\phi}{d\eta} \biggr)$

So, the governing LAWE throughout the envelope is,

 $~0$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl\{ 4 - 6\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-1} \theta_i \biggl(-\eta \frac{d\phi}{d\eta} \biggr)\biggl( \frac{\mu_e}{\mu_c} \biggr) \frac{1}{\theta_i \phi(\eta) } \biggr\}\frac{1}{r^*} \frac{dx}{dr*} + \biggl( \frac{\mu_e}{\mu_c} \biggr) \frac{1}{\theta_i \phi(\eta) } \biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~6\alpha_\mathrm{g}~\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-1} \theta_i \biggl(-\eta \frac{d\phi}{d\eta} \biggr) \biggl[ \frac{1}{\eta} \biggl( \frac{\mu_e}{\mu_c} \biggr) \biggl(\frac{2\pi}{3}\biggr)^{1 / 2} \biggr]^2 \biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl[ 4 - 6 \biggl(-\frac{d\ln\phi}{d\ln\eta} \biggr) \biggr] \frac{1}{r^*} \frac{dx}{dr*} + \biggl( \frac{\mu_e}{\mu_c} \biggr) \frac{1}{\theta_i \phi(\eta) } \biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~6\alpha_\mathrm{g}~\biggl( \frac{\mu_e}{\mu_c} \biggr) \frac{ \theta_i}{\eta} \biggl(- \frac{d\phi}{d\eta} \biggr) \biggl(\frac{2\pi}{3}\biggr) \biggr\} x$ $~=$ $~ \frac{d^2x}{dr*^2} + \biggl[ 4 - 6 \biggl(-\frac{d\ln\phi}{d\ln\eta} \biggr) \biggr] \frac{1}{r^*} \frac{dx}{dr*} + \frac{2\pi}{3}\biggl( \frac{\mu_e}{\mu_c} \biggr)^2\frac{ 1}{\eta^2} \biggl\{ \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-1} \biggl( \frac{\sigma_c^2}{\gamma_\mathrm{g}}\biggr) \frac{\eta^2}{\theta_i \phi(\eta) } ~-~6\alpha_\mathrm{g}~\biggl(- \frac{d\ln \phi}{d\ln\eta} \biggr) \biggr\} x \, .$

## Model 10

As we have reviewed in an accompanying discussion, equilibrium Model 10 from Murphy & Fiedler (1985, Proc. Astr. Soc. of Australia, 6, 219) is defined by setting $~(\xi_i, m) = (2.5646, 1)$. Drawing directly from our reproduction of their Table 1, we see that a few relevant structural parameters of Model 10 are,

 $~\xi_s$ $~=$ $~6.5252876$ $~\frac{r_i}{R} = \frac{\xi_i}{\xi_s}$ $~=$ $~0.39302482$ $~\frac{\rho_c}{\bar\rho}$ $~=$ $~34.346$ $~\frac{M_\mathrm{env}}{M_\mathrm{tot}}$ $~=$ $~5.89 \times 10^{-4}$

Here we list a few other model parameter values that will aid in our attempt to correctly integrate the LAWE to find various radial oscillation eigenvectors.

 A Sampling of Model 10's Equilibrium Parameter Values† GridLine $~\frac{r}{R}$ $~\xi$ $~\eta$ $~\Delta$ $~\phi$ $~- \frac{d\phi}{d\eta}$ $~r^*$ $~\rho^*$ $~P^*$ $~M_r^*$ $~g_0^*\equiv \frac{M_r^*}{(r^*)^2}$ 25 0.12093071 0.789108 0.31480842 0.89940188 0.80892374 0.122726799 1.23835945 40 0.19651241 1.2823 0.51156369 0.74761972 0.55893525 0.473819194 1.81056130 79 0.393025 2.5646 1.02312737 0.21270605 0.04524386 2.150231108 2.05411964 79 0.393025 1.4806725 2.6746514 1.000000 1.112155 1.02312737 0.21270605 0.04524386 2.15023111 2.0541196 100 0.49883919 1.8793151 2.7938569 0.6505914 0.69070815 1.2985847 0.0247926 0.0034309 2.15127319 1.2757189 150 0.7507782 2.8284641 2.9982701 0.2149684 0.30495637 1.95443562 9.7646E-05 4.4649E-06 2.15149752 0.563246 199 0.9976784 3.7586302 3.1404305 0.00150695 0.17269514 2.59716948 1.653E-15 5.2984E-19 2.15149876 0.31896316 †Our chosen (uniform) grid spacing is, $~\frac{\delta r}{R} = \frac{1}{78}\biggl( \frac{r_i}{R} \biggr) \approx 0.00503878 \, ;$ as a result, the center is at zone 1, the interface is at grid line 79, and the surface is just beyond grid line 199.

## Numerical Integration

### General Approach

Here, we begin by recognizing that the 2nd-order ODE that must be integrated to obtain the desired eigenvectors has the generic form,

 $~0$ $~=$ $~ x + \frac{\mathcal{H}}{r^*} x' + \mathcal{K}x \, ,$

where,

 $~x'$ $~=$ $~\frac{dx}{dr^*}$ and $~x$ $~=$ $~\frac{d^2x}{d(r^*)^2} \, .$

Adopting the same approach as before when we integrated the LAWE for pressure-truncated polytropes, we will enlist the finite-difference approximations,

 $~x'$ $~\approx$ $~ \frac{x_+ - x_-}{2\delta r^*}$ and $~x$ $~\approx$ $~ \frac{x_+ -2x_j + x_-}{(\delta r^*)^2} \, .$

The finite-difference representation of the LAWE is, therefore,

 $~\frac{x_+ -2x_j + x_-}{(\delta r^*)^2}$ $~=$ $~ -~ \frac{\mathcal{H}}{r^*} \biggl[ \frac{x_+ - x_-}{2\delta r^*} \biggr] ~-~ \mathcal{K}x_j$ $~\Rightarrow ~~~ x_+ -2x_j + x_-$ $~=$ $~ -~ \frac{\delta r^*}{2r^*} \biggl[ x_+ - x_- \biggr]\mathcal{H} ~-~ (\delta r^*)^2\mathcal{K}x_j$ $~\Rightarrow ~~~ x_{j+1} \biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]$ $~=$ $~ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_j ~-~\biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr]x_{j-1} \, .$

In what follows we will also find it useful to rewrite $~\mathcal{K}$ in the form,

$~\mathcal{K} ~\rightarrow ~\biggl(\frac{\sigma_c^2}{\gamma_\mathrm{g}}\biggr) \mathcal{K}_1 - \alpha_\mathrm{g} \mathcal{K}_2 \, .$

Case A:   From the above Foundation discussion, the relevant coefficient expressions for all regions of the configuration are,

 $~\mathcal{H}$ $~\equiv$ $~ \biggl\{ 4 -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)}\biggr\}$ , $~\mathcal{K}_1$ $~\equiv$ $~ \frac{2\pi }{3}\biggl(\frac{\rho^*}{ P^* } \biggr)$ and $~\mathcal{K}_2$ $~\equiv$ $~ \biggl(\frac{\rho^*}{ P^* } \biggr)\frac{M_r^*}{(r^*)^3} \, .$

Case B:   Alternatively, immediately following the above Profile discussion, the relevant coefficient expressions for the core are,

 $~\mathcal{H}$ $~\equiv$ $~ \biggl\{ 4 -2(1-\xi\cot\xi)\biggr\}$ , $~\mathcal{K}_1$ $~\equiv$ $~ \frac{2\pi }{3}\biggl(\frac{\xi}{ \sin\xi} \biggr)$ and $~\mathcal{K}_2$ $~\equiv$ $~ \frac{4\pi }{\xi^2 \sin\xi} \biggl(\sin\xi - \xi\cos\xi \biggr) \, ;$

while the coefficient expressions for the envelope are,

 $~\mathcal{H}$ $~=$ $~ \biggl\{ 4 - 6 \biggl(-\frac{d\ln\phi}{d\ln\eta} \biggr) \biggr\}$ , $~\mathcal{K}_1$ $~=$ $~ \frac{2\pi}{3}\biggl( \frac{\mu_e}{\mu_c} \biggr) \biggl\{ \frac{1}{\theta_i \phi(\eta) } \biggr\}$ and $~\mathcal{K}_2$ $~=$ $~ \frac{12\pi}{3}\biggl( \frac{\mu_e}{\mu_c} \biggr)^2\frac{ 1}{\eta^2} \biggl(- \frac{d\ln \phi}{d\ln\eta} \biggr) \, .$
 GridLine $~\frac{r}{R}$ $~\xi$ $~\eta$ Case A Case B $~\mathcal{H}$ $~\mathcal{K}_1$ $~\mathcal{K}_2$ $~\mathcal{H}$ $~\mathcal{K}_1$ $~\mathcal{K}_2$ 25 0.12093071 0.789108 3.566549 2.328653 4.373676 3.566549 2.328653 4.373676 40 0.19651241 1.2823 2.761112 2.801418 4.734049 2.761112 2.801418 4.734049 79 0.393025 2.5646 -5.880425 9.846430 9.4387879 -5.880424 9.846430 9.438787 79 0.393025 1.4806725 -5.880425 9.846430 9.4387879 -5.880424 9.846430 9.438787 100 0.49883919 1.8793151 -7.971244 15.134659 7.099025 -7.971184 15.134583 7.098989 150 0.7507782 2.8284641 -2.00748E+01 4.58038E+01 6.30260 -2.00749E+01 4.58041E+01 6.30264 199 0.9976784 3.7586302 -2.58045E+03 6.53411E+03 3.83150E+02 -2.58041E+03 6.53401E+03 3.83144E+02

### Special Handling at the Center

In order to kick-start the integration, we set the displacement function value to $~x_1 = 1$ at the center of the configuration $~(\xi_1 = 0)$, then draw on the derived power-series expression to determine the value of the displacement function at the first radial grid line, $~\xi_2 = \delta\xi$, away from the center. Specifically, we set,

 $~ x_2$ $~=$ $~ x_1 \biggl[ 1 - \frac{(n+1) \mathfrak{F} (\delta\xi)^2}{60} \biggr] \, .$

### Special Handling at the Interface

Integrating outward from the center, the general approach will work up through the determination of $~x_{j+1}$ when "j+1" refers to the interface location. In order to properly transition from the core to the envelope, we need to determine the value of the slope at this interface location. Let's do this by setting j = i, then projecting forward to what $~x_+$ would be — that is, to what the amplitude just beyond the interface would be — if the core were to be extended one more zone. Then, the slope at the interface (as viewed from the perspective of the core) will be,

 $~x'_i\biggr|_\mathrm{core}$ $~\approx$ $~ \frac{1}{2\delta r^*} \biggl\{ x_+ - x_{i-1} \biggr\}$ $~=$ $~ -\frac{x_{i-1}}{2\delta r^*} + \frac{1}{2\delta r^*} \biggl\{ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_i ~-~\biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr]x_{i-1} \biggr\}\biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]^{-1}$ $~=$ $~ \frac{1}{2\delta r^*} \biggl\{ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_i ~-~\biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr]x_{i-1} ~-~\biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]x_{i-1} \biggr\}\biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]^{-1}$ $~=$ $~ \frac{1}{2\delta r^*} \biggl\{ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_i ~-~2x_{i-1} \biggr\}\biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]^{-1}$

Conversely, as viewed from the envelope, if we assume that we know $~x_i$ and $~x'_i$, we can determine the amplitude, $~x_{i+1}$, at the first zone beyond the interface as follows:

 $~x_-$ $~\approx$ $~ x_{i+1} - 2\delta r^*\cdot x'_i\biggr|_\mathrm{env}$ $~\Rightarrow ~~~ x_{i+1} \biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr]$ $~=$ $~ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_i ~-~\biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr] \biggl[ x_{i+1} - 2\delta r^*\cdot x'_i\biggr|_\mathrm{env} \biggr]$ $~\Rightarrow ~~~ x_{i+1} \biggl[1 + \biggl( \frac{\delta r^*}{2r^*}\biggr) \mathcal{H} \biggr] ~+~ \biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr] x_{i+1}$ $~=$ $~ \biggl[ 2 - (\delta r^*)^2\mathcal{K}\biggr] x_i ~+~ \biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr] 2\delta r^*\cdot x'_i\biggr|_\mathrm{env}$ $~\Rightarrow ~~~ x_{i+1}$ $~=$ $~ \biggl[ 1 - \tfrac{1}{2}(\delta r^*)^2\mathcal{K}\biggr] x_i ~+~ \biggl[ 1 - \biggl( \frac{\delta r^*}{2r^*} \biggr) \mathcal{H} \biggr] \delta r^*\cdot x'_i\biggr|_\mathrm{env}$

## Eigenvectors

Keep in mind that, for all models, we expect that, at the surface, the logarithmic derivative of each proper eigenfunction will be,

 $~\frac{d\ln x}{d\ln r^*}\biggr|_\mathrm{surf}$ $~=$ $~\frac{\Omega^2}{\gamma} - \alpha \, .$

Also, keep in mind that, for Model 10 $~(\xi_i = 2.5646)$:

 $~\frac{r_i}{R}$ $~=$ $~0.39302482$ , $~\frac{\rho_c}{\bar\rho}$ $~=$ $~34.3460405$

 Our Determinations for Model 10 Mode $~\sigma_c^2$ $~\Omega^2 \equiv \frac{\sigma_c^2}{2} \biggl( \frac{\rho_c}{\bar\rho}\biggr)$ $~x_\mathrm{surf}$ $~\frac{d\ln x}{d\ln r^*}\biggr|_\mathrm{surf}$ $~\frac{r}{R}\biggr|_1$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_1$ $~\frac{r}{R}\biggr|_2$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_2$ $~\frac{r}{R}\biggr|_3$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_3$ expected measured 1(Fundamental) 0.92813095170326 15.93881161 +85.17 8.963286966 8.963085 n/a n/a n/a n/a n/a n/a 2 1.237156768978 21.24571822 - 610 12.14743093 12.147337 0.5724 3.05E-05 n/a n/a n/a n/a 3 1.8656033984 32.0380449 +3225 18.62282676 18.6228 0.4845 1.35E-04 0.787 2.05E-07 n/a n/a 4 2.65901504799 45.66331921 -9410 26.79799153 26.797977 0.4459 2.620E-04 0.7096 1.834E-06 0.8632 1.189E-08

For Model 17 $~(\xi_i = 3.0713)$:

 $~\frac{r_i}{R}$ $~=$ $~0.93276717$ , $~\frac{\rho_c}{\bar\rho}$ $~=$ $~3.79693903$

 Our Determinations for Model 17 Mode $~\sigma_c^2$ $~\Omega^2 \equiv \frac{\sigma_c^2}{2} \biggl( \frac{\rho_c}{\bar\rho}\biggr)$ $~x_\mathrm{surf}$ $~\frac{d\ln x}{d\ln r^*}\biggr|_\mathrm{surf}$ $~\frac{r}{R}\biggr|_1$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_1$ $~\frac{r}{R}\biggr|_2$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_2$ $~\frac{r}{R}\biggr|_3$ $~1 - \frac{M_r}{M_\mathrm{tot}}\biggr|_3$ expected measured 1(Fundamental) 1.149837904 2.182932207 +1.275 0.7097593 0.7097550 n/a n/a n/a n/a n/a n/a 2 7.34212930615 13.93880866 - 2.491 7.763285 7.763244 0.7215 0.24006 n/a n/a n/a n/a 3 16.345072567 31.03062198 +4.33 18.01837 18.01826 0.5806 0.5027 0.848 0.0541 n/a n/a 4 27.746934203 52.6767087 -9.1 31.0060 31.0058 0.4859 0.6737 0.7429 0.1974 0.8957 0.0171

 Numerical Values for Some Selected $~(n_c, n_e) = (1, 5)$ Bipolytropes [to be compared with Table 1 of Murphy & Fiedler (1985)] MODEL Source $~\frac{r_i}{R}$ $~\Omega_0^2$ $~\Omega_1^2$ $~\frac{r}{R}\biggr|_1$ $~1-\frac{M_r}{M_\mathrm{tot}}\biggr|_1$ 10 MF85 0.393 15.9298 21.2310 0.573 1.00E-03 Here 0.39302 15.93881161 21.24571822 0.5724 3.05E-05 17 MF85 0.933 2.1827 13.9351 0.722 0.232 Here 0.93277 2.182932207 13.93880866 0.7215 0.24006

## Try Splitting Analysis Into Separate Core and Envelope Components

### Core:

Given that, $~\sqrt{2\pi}~r^* = \xi$, lets multiply the LAWE through by $~(2\pi)^{-1}$. This gives,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl\{ 4 -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)}\biggr\}\frac{1}{\xi} \cdot \frac{dx}{d\xi} + \frac{1}{2\pi}\biggl(\frac{\rho^*}{ P^* } \biggr)\biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~\frac{\alpha_\mathrm{g} M_r^*}{(r^*)^3}\biggr\} x \, .$

Specifically for the core, therefore, the finite-difference representation of the LAWE is,

 $~\frac{x_+ -2x_j + x_-}{(\delta \xi)^2}$ $~=$ $~ -~ \frac{\mathcal{H}}{\xi} \biggl[ \frac{x_+ - x_-}{2\delta \xi} \biggr] ~-~ \biggl[ \frac{\mathcal{K}}{2\pi} \biggr]x_j$ $~\Rightarrow ~~~ x_+ -2x_j + x_-$ $~=$ $~ -~ \frac{\delta \xi}{2\xi} \biggl[ x_+ - x_- \biggr]\mathcal{H} ~-~ (\delta \xi)^2 \biggl[ \frac{\mathcal{K}}{2\pi} \biggr] x_j$ $~\Rightarrow ~~~ x_{j+1} \biggl[1 + \biggl( \frac{\delta \xi}{2\xi}\biggr) \mathcal{H} \biggr]$ $~=$ $~ \biggl[ 2 - (\delta \xi)^2\biggl( \frac{\mathcal{K}}{2\pi} \biggr) \biggr] x_j ~-~\biggl[ 1 - \biggl( \frac{\delta \xi}{2\xi} \biggr) \mathcal{H} \biggr]x_{j-1} \, .$

This also means that, as viewed from the perspective of the core, the slope at the interface is

 $~\biggl[ \frac{dx}{d\xi}\biggr]_\mathrm{interface}$ $~=$ $~ \frac{1}{2\delta \xi} \biggl\{ \biggl[ 2 - (\delta \xi)^2 \biggl( \frac{\mathcal{K}}{2\pi} \biggr)\biggr] x_i ~-~2x_{i-1} \biggr\}\biggl[1 + \biggl( \frac{\delta \xi}{2\xi}\biggr) \mathcal{H} \biggr]^{-1} \, .$

### Envelope:

Given that,

$~\biggl( \frac{\mu_e}{\mu_c} \biggr) \biggl(\frac{2\pi}{3}\biggr)^{1 / 2}~r^* = \eta \, ,$

let's multiply the LAWE through by $~(3/2\pi)( \mu_e/\mu_c)^{-2}$. This gives,

 $~0$ $~=$ $~ \frac{d^2x}{d\eta^2} + \biggl\{ 4 -\biggl(\frac{\rho^*}{P^*}\biggr)\frac{ M_r^*}{(r^*)}\biggr\}\frac{1}{\eta} \cdot \frac{dx}{d\eta} + \frac{3}{2\pi} \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2} \biggl(\frac{\rho^*}{ P^* } \biggr)\biggl\{ \frac{2\pi \sigma_c^2}{3\gamma_\mathrm{g}} ~-~\frac{\alpha_\mathrm{g} M_r^*}{(r^*)^3}\biggr\} x \, .$

Specifically for the envelope, therefore, the finite-difference representation of the LAWE is,

 $~\frac{x_+ -2x_j + x_-}{(\delta \eta)^2}$ $~=$ $~ -~ \frac{\mathcal{H}}{\eta} \biggl[ \frac{x_+ - x_-}{2\delta \eta} \biggr] ~-~ \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2}\biggl[ \frac{3\mathcal{K}}{2\pi} \biggr]x_j$ $~\Rightarrow ~~~ x_+ -2x_j + x_-$ $~=$ $~ -~ \frac{\delta \eta}{2\eta} \biggl[ x_+ - x_- \biggr]\mathcal{H} ~-~ (\delta \eta)^2 \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2}\biggl[ \frac{3\mathcal{K}}{2\pi} \biggr] x_j$ $~\Rightarrow ~~~ x_{j+1} \biggl[1 + \biggl( \frac{\delta \eta}{2\eta}\biggr) \mathcal{H} \biggr]$ $~=$ $~ \biggl[ 2 - (\delta \eta)^2 \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2} \biggl( \frac{3\mathcal{K}}{2\pi} \biggr) \biggr] x_j ~-~\biggl[ 1 - \biggl( \frac{\delta \eta}{2\eta} \biggr) \mathcal{H} \biggr]x_{j-1} \, .$

This also means that, once we know the slope at the interface (see immediately below), the amplitude at the first zone outside of the interface will be given by the expression,

 $~x_{i+1}$ $~=$ $~ \biggl[ 1 - \tfrac{1}{2}(\delta \eta)^2 \biggl( \frac{\mu_e}{\mu_c} \biggr)^{-2} \biggl( \frac{3\mathcal{K}}{2\pi} \biggr)\biggr] x_i ~+~ \biggl[ 1 - \biggl( \frac{\delta \eta}{2\eta} \biggr) \mathcal{H} \biggr] \delta \eta \cdot \biggl[ \frac{dx}{d\eta} \biggr]_\mathrm{interface} \, .$

### Interface

If we consider only cases where $~\gamma_e = \gamma_c$, then at the interface we expect,

 $~\frac{d\ln x}{d\ln r^*}$ $~=$ $~\frac{d\ln x}{d\ln \xi} = \frac{d\ln x}{d\ln \eta}$ $~\Rightarrow ~~~ r^*\frac{dx}{d r^*}$ $~=$ $~\xi \frac{dx}{d \xi} = \eta \frac{d x}{d \eta}$ $~\Rightarrow ~~~ \frac{dx}{dr^*}$ $~=$ $~(2\pi)^{1 / 2}\frac{dx}{d\xi} = \biggl(\frac{\mu_e}{\mu_c}\biggr) \biggl(\frac{2\pi}{3}\biggr)^{1 / 2} \frac{dx}{d\eta} \, .$

Switching at the interface from $~\xi$ to $~\eta$ therefore means that,

 $~ \biggl[ \frac{dx}{d\eta}\biggr]_\mathrm{interface}$ $~=$ $~\sqrt{3}\biggl(\frac{\mu_e}{\mu_c}\biggr)^{-1} \biggl[ \frac{dx}{d\xi}\biggr]_\mathrm{interface} \, .$

# Begin Our Analysis

## Relevant LAWEs

The LAWE that is relevant to polytropic spheres may be written as,

 $~0 = \frac{d^2x}{d\xi^2} + \biggl[ 4 - (n+1) Q \biggr] \frac{1}{\xi} \cdot \frac{dx}{d\xi} + (n+1) \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_g } \biggr) \frac{\xi^2}{\theta} - \alpha Q\biggr] \frac{x}{\xi^2}$ where:    $~Q(\xi) \equiv - \frac{d\ln\theta}{d\ln\xi} \, ,$    $~\sigma_c^2 \equiv \frac{3\omega^2}{2\pi G\rho_c} \, ,$     and,     $~\alpha \equiv \biggl(3 - \frac{4}{\gamma_\mathrm{g}}\biggr)$

### Core Layers With n = 5

The LAWE for n = 5 structures is,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl[ 4 - 6Q_5 \biggr] \frac{1}{\xi} \cdot \frac{dx}{d\xi} + 6 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{core} } \biggr) \frac{\xi^2}{\theta_5} - \alpha_\mathrm{core} Q_5\biggr] \frac{x}{\xi^2}$

where,

 $~Q_5$ $~\equiv$ $~- \frac{d\ln\theta_5}{d\ln\xi} \, .$

From our study of the equilibrium structure of $~(n_c, n_e) = (5, 1)$ bipolytropes, we have,

 $~ \theta_5$ $~=$ $~\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1 / 2} \, ;$ $~ \frac{d\theta_5}{d\xi}$ $~=$ $~- \frac{\xi}{3}\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-3/2} \, .$ $~\Rightarrow~~~ Q_5 = - \frac{\xi}{\theta_5} \cdot \frac{d\theta_5}{d\xi}$ $~=$ $~ \biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{1 / 2} \frac{\xi^2}{3}\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-3 / 2}$ $~=$ $~ \frac{\xi^2}{3}\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1} \, .$

Hence, for the core the governing LAWE is,

 $~0$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl\{ 4 - 2\xi^2\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1} \biggr\} \frac{1}{\xi} \cdot \frac{dx}{d\xi} + 6 \biggl\{ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{core} } \biggr) \xi^2\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{1 / 2} - ~\alpha_\mathrm{core} \cdot \frac{\xi^2}{3}\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1} \biggr\} \frac{x}{\xi^2}$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl\{ 2 - \xi^2\biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1} \biggr\} \frac{2}{\xi} \cdot \frac{dx}{d\xi} + \biggl\{ \biggl( \frac{\sigma_c^2}{\gamma_\mathrm{core} } \biggr) \biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{1 / 2} - ~2\alpha_\mathrm{core} \biggl[ 1 + \frac{1}{3}\xi^2 \biggr]^{-1} \biggr\} x$ $~=$ $~ \frac{d^2x}{d\xi^2} + \biggl\{ 2 - 3\xi^2\biggl[ 3 + \xi^2 \biggr]^{-1} \biggr\} \frac{2}{\xi} \cdot \frac{dx}{d\xi} + \biggl\{ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) \biggl[ 3 + \xi^2 \biggr]^{1 / 2} - ~6\alpha_\mathrm{core} \biggl[ 3 + \xi^2 \biggr]^{-1} \biggr\} x$ $~\Rightarrow ~~~ 0$ $~=$ $~ (3 + \xi^2) \frac{d^2x}{d\xi^2} + \biggl\{ 2(3 + \xi^2) - 3\xi^2 \biggr\} \frac{2}{\xi} \cdot \frac{dx}{d\xi} + \biggl\{ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr\} x$ $~=$ $~ (3 + \xi^2) \frac{d^2x}{d\xi^2} + ( 6 - \xi^2 ) \frac{2}{\xi} \cdot \frac{dx}{d\xi} + \biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr] x \, .$

This exactly matches our derivation performed in the context of pressure-truncated polytropes. When we insert the eigenfunction obtained via a Eureka Moment on 3/6/2017,

 $~x$ $~=$ $~x_0\biggl[1 - \frac{\xi^2}{15}\biggr] \, ,$ $~\Rightarrow~~~ \frac{dx}{d\xi}$ $~=$ $~- \frac{2x_0 \xi}{15}$ $~\Rightarrow~~~ \frac{d^2x}{d\xi^2}$ $~=$ $~- \frac{2x_0 }{15} \, ,$

we obtain,

 $~ (3 + \xi^2) \frac{d^2x}{d\xi^2} + ( 6 - \xi^2 ) \frac{2}{\xi} \cdot \frac{dx}{d\xi} + \biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr] x$ $~=$ $~ -~(3 + \xi^2) \frac{2x_0 }{15} - 2( 6 - \xi^2 ) \frac{2x_0 }{15} + \frac{x_0}{15}\biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr] (15 - \xi^2)$ $~=$ $~ -\frac{x_0}{15} \biggl\{ 2(3 + \xi^2) + 4( 6 - \xi^2 ) - \biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr] (15 - \xi^2) \biggr\}$ $~=$ $~ -\frac{x_0}{15} \biggl\{ 30 - 2\xi^2 ~+ ~6\alpha_\mathrm{core} (15 - \xi^2) ~- \biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} \biggr] (15 - \xi^2) \biggr\} \, .$

The right-hand-side goes to zero if $~\alpha_\mathrm{core} = - 1/3$ and $~\sigma_c = 0$. Also, notice that,

 $~ \frac{d\ln x}{d\ln \xi}\biggr|_\mathrm{core} = \frac{\xi}{x}\cdot \frac{dx}{d\xi} \biggr|_\mathrm{core}$ $~=$ $~- \frac{2x_0 \xi^2}{15} \biggl\{ x_0\biggl[1 - \frac{\xi^2}{15}\biggr] \biggr\}^{-1}$ $~=$ $~- \biggl\{ \frac{15}{2\xi^2}\biggl[\frac{15 -\xi^2}{15}\biggr] \biggr\}^{-1}$ $~=$ $~- \biggl[\frac{15 -\xi^2}{2\xi^2}\biggr]^{-1}$ $~=$ $~2 \biggl[1 - \frac{15}{\xi^2} \biggr]^{-1} \, .$

So, with $~\gamma_c = 6/5$ and $~\gamma_e = 2$ we need,

 $~\frac{d\ln x_\mathrm{env}}{d\ln \xi} \biggr|_{\xi=\xi_i}$ $~=$ $~3\biggl(\frac{\gamma_c}{\gamma_e} -1\biggr) + \frac{\gamma_c}{\gamma_e} \biggl( \frac{d\ln x_\mathrm{core}}{d\ln \xi} \biggr)_{\xi=\xi_i}$ $~=$ $~3\biggl(\frac{3}{5} -1\biggr) + \frac{6}{5} \biggl[1 - \frac{15}{\xi_i^2} \biggr]^{-1}$ $~=$ $~\frac{6}{5} \biggl\{ \biggl[\frac{\xi_i^2 - 15}{\xi_i^2} \biggr]^{-1} - 1 \biggr\}$ $~=$ $~\frac{6}{5} \biggl[\frac{15}{\xi_i^2 - 15} \biggr] \, .$

### Envelope Layers With n = 1

And for n = 1 structures the LAWE is,

 $~0$ $~=$ $~ \frac{d^2x}{d\eta^2} + \biggl[ 4 - 2 Q_1 \biggr] \frac{1}{\eta} \cdot \frac{dx}{d\eta} + 2 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{env} } \biggr) \frac{\eta^2}{\theta_1} - \alpha_\mathrm{env} Q_1\biggr] \frac{x}{\eta^2}$

where,

 $~Q_1$ $~\equiv$ $~- \frac{d\ln\theta_1}{d\ln\eta} \, .$

As has already been pointed out, above, for n = 1 polytropic spheres, this LAWE becomes,

 $~0$ $~=$ $~ \frac{d^2x}{d\eta^2} + \frac{2}{\eta} \biggl[ 1 + \eta\cot\eta \biggr]\frac{dx}{d\eta} + \biggl[ \frac{\gamma_g}{\gamma_\mathrm{env}}\biggl( \omega_k^2 \theta_c \biggr) \frac{\eta}{\sin\eta} + \frac{2 \alpha_\mathrm{env} ( \eta\cos\eta - \sin\eta) }{\eta^2 \sin\eta} \biggr] x \, .$

In a separate chapter, we explain that the analytically defined eigenfunction that satisfies this LAWE — when $~\omega_k^2 = 0$ and $~\alpha_\mathrm{env} = +1$ — is,

 $~x_P\biggr|_{n=1}$ $~=$ $~ \frac{3b_e}{\eta^2}\biggl[ 1- \eta \cot\eta \biggr] \, .$

### Summary

For a given choice of the equilibrium model parameters, $~\xi_i$ and $~\mu_e/\mu_c$, we can pull the parameters and profiles of the base equilibrium model from our accompanying chapter on $~(n_c, n_e) = (5, 1)$ bipolytropes. Note, in particular, that:

 $~r^*$ $~=$ $~\biggl( \frac{3}{2\pi}\biggr)^{1 / 2} \xi \, ,$ for, $~0 \le \xi \le \xi_i \, .$ $~r^*$ $~=$ $~\biggl[ \biggl( \frac{\mu_e}{\mu_c}\biggr)^{-1} \frac{1}{\sqrt{2\pi}} \biggl(1 + \frac{\xi_i^2}{3} \biggr) \biggr] \eta \, ,$ for, $~\eta_i \le \eta \le \eta_s \, ;$ $~\eta_s$ $~=$ $~ \eta_i + \frac{\pi}{2} + \tan^{-1} \biggl[\frac{1}{\eta_i} - \frac{\xi_i}{\sqrt{3}} \biggr] \, .$

Then, for a choice of the pair of exponents, $~\gamma_\mathrm{core}$ and $~\gamma_\mathrm{env}$, that govern the behavior of adiabatic oscillations, the LAWE to be numerically integrated is:

 $~0$ $~=$ $~ (3 + \xi^2) \frac{d^2x_\mathrm{core}}{d\xi^2} + ( 6 - \xi^2 ) \frac{2}{\xi} \cdot \frac{dx_\mathrm{core}}{d\xi} + \biggl[ \biggl( \frac{\sigma_c^2}{\sqrt{3}~\gamma_\mathrm{core} } \biggr) ( 3 + \xi^2 )^{3 / 2} - ~6\alpha_\mathrm{core} \biggr] x_\mathrm{core} \, ,$ for, $~0 \le \xi \le \xi_i \, ;$ $~0$ $~=$ $~ \frac{d^2x_\mathrm{env}}{d\eta^2} + \biggl[ 1 + \eta\cot\eta \biggr] \frac{2}{\eta} \cdot \frac{dx_\mathrm{env}}{d\eta} + 2 \biggl[ \biggl( \frac{\sigma_c^2}{6\gamma_\mathrm{env} } \biggr) \frac{\eta^3}{\sin\eta} - \alpha_\mathrm{env} ( 1 - \eta\cot\eta )\biggr] \frac{x_\mathrm{env}}{\eta^2} \, ,$ for, $~\eta_i \le \eta \le \eta_s \, .$

The boundary conditions at the center of the configuration are, $~x_\mathrm{env} = 1$, while $~dx_\mathrm{env}/d\xi = 0$.

As described above, the two interface boundary conditions are, $~x_\mathrm{env} = x_\mathrm{core}$, and,

 $~\frac{d\ln x_\mathrm{env}}{d\ln \xi} \biggr|_{\xi=\xi_i}$ $~=$ $~3\biggl(\frac{\gamma_\mathrm{core}}{\gamma_\mathrm{env}} -1\biggr) + \frac{\gamma_\mathrm{core}}{\gamma_\mathrm{env}} \biggl( \frac{d\ln x_\mathrm{core}}{d\ln \xi} \biggr)_{\xi=\xi_i} \, .$

Finally, drawing from a related discussion of the surface boundary condition for isolated n = 3 polytropes, at the surface we need,

 $~\frac{d\ln x_\mathrm{env}}{d\ln \eta}\biggr|_\mathrm{surface}$ $~=$ $~\frac{1}{\gamma_\mathrm{env}} \biggl( 4 - 3\gamma_\mathrm{env} + \frac{\omega^2 R^3}{GM_\mathrm{tot}}\biggr)$ $~=$ $~\biggl[ \frac{3\omega^2 R^3}{4\pi G \gamma_\mathrm{env} \bar\rho} - \alpha_\mathrm{env} \biggr]$ $~=$ $~\frac{1}{2} \biggl[ \frac{\sigma_c^2}{\gamma_\mathrm{env} } \biggl(\frac{\rho_c}{\bar\rho}\biggr) -2 \alpha_\mathrm{env} \biggr] \, ,$

where, for an $~(n_c, n_e) = (5, 1)$ bipolytrope,

 $~\frac{\rho_c}{\bar\rho}$ $~=$ $~ \biggl(\frac{\mu_e}{\mu_c}\biggr)^{-1} \frac{\eta_s^2}{3A\theta_i^5} \, .$