Difference between revisions of "User:Tohline/Apps/GoldreichWeber80"

From VistrailsWiki
Jump to navigation Jump to search
(→‎Homologous Solution: More progress)
 
(37 intermediate revisions by the same user not shown)
Line 2: Line 2:
{{LSU_HBook_header}}
{{LSU_HBook_header}}
==Review of Goldreich and Weber (1980)==
==Review of Goldreich and Weber (1980)==
This is principally a review of the dynamical model that Peter Goldreich & Stephen Weber [http://adsabs.harvard.edu/abs/1980ApJ...238..991G (1980, ApJ, 238, 991)] developed to describe the near-homologous collapse of stellar cores.   
This is principally a review of the dynamical model that Peter Goldreich & Stephen Weber [http://adsabs.harvard.edu/abs/1980ApJ...238..991G (1980, ApJ, 238, 991)] developed to describe the near-homologous collapse of stellar cores.  As we began to study the Goldreich & Weber paper, it wasn't immediately obvious how the set of differential governing equations should be modified in order to accommodate a radially contracting (accelerating) coordinate system.  I did not understand the transformed set of equations presented by Goldreich & Weber as equations (7) and (8), for example.  At first, I turned to [http://www.sciencedirect.com/science/article/pii/S0021999106002555 Poludnenko & Khokhlov (2007, Journal of Computational Physics, 220, 678)] — hereafter, PK07 — for guidance.  PK07 develop a very general set of governing equations that allows for coordinate rotation as well as expansion or contraction.  Ultimately, the most helpful additional reference proved to be §19.11 (pp. 187 - 190) of Kippenhahn & Weigert [ [[User:Tohline/Appendix/References#KW94|KW94]] ].


===Governing Equations===
===Governing Equations===
Line 19: Line 19:
</div>
</div>
   
   
their equation (3) is what [[User:Tohline/PGE/Euler#in_terms_of_the_vorticity:|we have referred to]] as the
<div align="center">
Euler Equation<br />
<span id="ConservingMomentum:Lagrangian"><font color="#770000">'''in terms of the Vorticity'''</font></span>,
{{User:Tohline/Math/EQ_Euler04}}
</div>
where, <math>~\vec\zeta \equiv \nabla\times \vec{v}</math> is the fluid vorticity; their equation (4) is the
<div align="center">
<font color="#770000">'''Poisson Equation'''</font><br />
{{User:Tohline/Math/EQ_Poisson01}}
</div>


their equation (2) is what [[User:Tohline/PGE/ConservingMass#Eulerian_Representation|we have referred to]] as the
and their equation (2) is what [[User:Tohline/PGE/ConservingMass#Eulerian_Representation|we have referred to]] as the


<div align="center">
<div align="center">
Line 30: Line 45:
{{User:Tohline/Math/EQ_Continuity02}}
{{User:Tohline/Math/EQ_Continuity02}}
</div>
</div>
their equation (3) is what [[User:Tohline/PGE/Euler#in_terms_of_the_vorticity:|we have referred to]] as the
although, for the derivation, below, we prefer to start with what [[User:Tohline/PGE/ConservingMass#Lagrangian_Representation|we have referred to]] as the
 
<div align="center">
<div align="center">
Euler Equation<br />
<span id="ConservingMass:Lagrangian"><font color="#770000">'''Standard Lagrangian Representation'''</font></span><br />
<span id="ConservingMomentum:Lagrangian"><font color="#770000">'''in terms of the Vorticity'''</font></span>,
of the Continuity Equation,


{{User:Tohline/Math/EQ_Euler04}}
{{User:Tohline/Math/EQ_Continuity01}}
</div>
</div>
where, <math>~\vec\zeta \equiv \nabla\times \vec{v}</math> is the fluid vorticity; and their equation (4) is the
<div align="center">
<font color="#770000">'''Poisson Equation'''</font><br />


{{User:Tohline/Math/EQ_Poisson01}}
</div>
Tweaking the set of principal governing equations, as we have written them, to even more precisely match equations (1) - (4) in Goldreich &amp; Weber (1980), we should replace the state variable <math>~P</math> (pressure) with <math>~H</math> (enthalpy), keeping in mind that, <math>~\gamma = 1 + 1/n</math>, and, [[User:Tohline/SR#Barotropic_Structure|as presented in our introductory discussion of barotropic supplemental relations]],
Tweaking the set of principal governing equations, as we have written them, to even more precisely match equations (1) - (4) in Goldreich &amp; Weber (1980), we should replace the state variable <math>~P</math> (pressure) with <math>~H</math> (enthalpy), keeping in mind that, <math>~\gamma = 1 + 1/n</math>, and, [[User:Tohline/SR#Barotropic_Structure|as presented in our introductory discussion of barotropic supplemental relations]],
<div align="center">
<div align="center">
Line 70: Line 78:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}v^2 \biggr] \, .</math>
<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}v_r^2 \biggr] \, .</math>
   </td>
   </td>
</tr>
</tr>
Line 77: Line 85:
Goldreich &amp; Weber also realize that, because the flow is vorticity free, the velocity can be obtained from a stream function, <math>~\psi</math>, via the relation,
Goldreich &amp; Weber also realize that, because the flow is vorticity free, the velocity can be obtained from a stream function, <math>~\psi</math>, via the relation,
<div align="center">
<div align="center">
<math>~\vec{v} = \nabla\psi \, .</math>
<math>~\vec{v} = \nabla\psi ~~~~~\Rightarrow~~~~~v_r = \nabla_r\psi </math>
&nbsp; &nbsp; &nbsp; &nbsp; and &nbsp; &nbsp; &nbsp; &nbsp;
<math>~\nabla\cdot \vec{v} = \nabla_r^2 \psi \, .</math>
</div>
Hence, the continuity equation becomes,
<div align="center">
<table border="0" cellpadding="5" align="center">
 
<tr>
  <td align="right">
<math>~\frac{1}{\rho} \frac{d\rho}{dt}</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~ \nabla_r^2 \psi \, ,</math>
  </td>
</tr>
</table>
</div>
 
and the Euler equation becomes,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{\partial }{\partial t} \biggl[ \nabla_r \psi \biggr]</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}(\nabla_r \psi)^2 \biggr] \, .</math>
  </td>
</tr>
</table>
</div>
 
Since we are, up to this point in the discussion, still referencing the inertial-frame radial coordinate, the <math>~\nabla_r</math> operator can be moved outside of the partial time-derivative on the lefthand side of this equation to give,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\nabla_r \biggl[ \frac{\partial \psi}{\partial t} + H + \Phi + \frac{1}{2}(\nabla_r \psi)^2 \biggr]</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~0 \, .</math>
  </td>
</tr>
</table>
</div>
</div>
Hence, the Euler equation becomes,
This means that the terms inside the square brackets must sum to a constant that is independent of spatial position.  Following the lead of Goldreich &amp; Weber, this "integration constant" will be incorporated into the potential, in which case we have,
 
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
Line 90: Line 152:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~ \biggl[ H + \Phi + \frac{1}{2}\biggl( \nabla \psi \biggr)^2 \biggr] \, ,</math>
<math>~-~ \biggl[ H + \Phi + \frac{1}{2} ( \nabla_r \psi )^2 \biggr] \, ,</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
where, <math>~H</math>, <math>~\Phi</math>, and <math>~\psi</math> are each functions only of the radial coordinate and time.
which matches equation (5) of [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)].


===Dimensionless Normalization===
Now, because it is more readily integrable, we ultimately would like to work with a differential equation that contains the total, rather than partial, time derivative of <math>~\psi</math>.  So we will take this opportunity to shift from an Eulerian representation of the Euler equation to a Lagrangian representation, invoking the same (familiar to fluid dynamicists) operator transformation as we have used in our [[User:Tohline/PGE/Euler#Eulerian_Representation|general discussion of the Euler equation]], namely,
<div align="center" id="TimeDerivativeTransformation">
<math>~\frac{\partial\psi}{\partial t} ~~ \rightarrow ~~ \frac{d\psi}{dt} - \vec{v}\cdot \nabla\psi \, .</math>
</div>
In the context of Goldreich &amp; Weber's model, we are dealing with a one-dimension (spherically symmetric), radial flow, so,
<div align="center">
<math>\vec{v}\cdot \nabla\psi = v_r \nabla_r \psi \, .</math>
</div>
But, given that we have adopted a stream-function representation of the flow in which <math>~v_r = \nabla_r\psi</math>, we appreciate that this term can either be written as <math>~v_r^2</math> or <math>~(\nabla_r\psi)^2</math>.  We choose the latter representation, so the Euler equation becomes,
 
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{d\psi}{dt} - (\nabla_r\psi)^2</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~ \biggl[ H + \Phi + \frac{1}{2} ( \nabla_r \psi )^2 \biggr] \, ,</math>
  </td>
</tr>
</table>
</div>
or, combining like terms on the left and right,
 
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{d\psi}{dt} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\frac{1}{2} ( \nabla_r \psi )^2 - H - \Phi  \, .</math>
  </td>
</tr>
</table>
</div>
 
===Dimensionless and ''Time-Dependent'' Normalization===
====Length====


In their investigation, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] chose the same length scale for normalization that is used in deriving the [[User:Tohline/SSC/Structure/Polytropes#Lane-Emden_equation|Lane-Emden equation]], which governs the hydrostatic structure of a polytrope of index {{ User:Tohline/Math/MP_PolytropicIndex }}, that is,
In their investigation, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] chose the same length scale for normalization that is used in deriving the [[User:Tohline/SSC/Structure/Polytropes#Lane-Emden_equation|Lane-Emden equation]], which governs the hydrostatic structure of a polytrope of index {{ User:Tohline/Math/MP_PolytropicIndex }}, that is,
Line 108: Line 214:
<div align="center">
<div align="center">
<math>
<math>
a(t) = \rho_c^{-1/3} \biggl(\frac{\kappa}{\pi G}\biggr)^{1/2} \, .
a = \rho_c^{-1/3} \biggl(\frac{\kappa}{\pi G}\biggr)^{1/2} \, .
</math>
</math>
</div>
</div>
''Quite significantly'', Goldreich &amp; Weber (see their equation 6) allow the normalizing scale length to vary with time in order for the governing equations to accommodate a self-similar dynamical solution.  This, in turn, will mean that either the central density varies with time, or the specific entropy of all fluid elements (captured by the value of <math>~\kappa</math>) varies with time, or both.  In practice, Goldreich &amp; Weber assume that <math>~\kappa</math> is held fixed, so the time-variation in the scale length, <math>~a</math>, reflects a time-varying central density; specifically,
''Most significantly'', Goldreich &amp; Weber (see their equation 6) allow the normalizing scale length to vary with time in order for the governing equations to accommodate a self-similar dynamical solution.  In doing this, they effectively adopted an ''accelerating'' coordinate system with a time-dependent dimensionless radial coordinate,
<div align="center">
<math>~\vec\mathfrak{x} \equiv \frac{1}{a(t)} \vec{r} \, .</math>
</div>
 
This, in turn, will mean that either the central density varies with time, or the specific entropy of all fluid elements (captured by the value of <math>~\kappa</math>) varies with time, or both.  In practice, Goldreich &amp; Weber assume that <math>~\kappa</math> is held fixed, so the time-variation in the scale length, <math>~a</math>, reflects a time-varying central density; specifically,
<div align="center">
<div align="center">
<math>
<math>
Line 118: Line 229:
</div>
</div>


Given the newly adopted dimensionless radial coordinate, the following replacements for the spatial operators should be made, as appropriate, throughout the set of governing equations:
<div align="center">
<math>~\nabla_r ~\rightarrow~ a^{-1} \nabla_\mathfrak{x}</math>&nbsp; &nbsp; &nbsp; &nbsp;
and
&nbsp; &nbsp; &nbsp; &nbsp;<math>~\nabla_r^2 ~\rightarrow~ a^{-2} \nabla_\mathfrak{x}^2 \, .</math>
</div>
Specifically, the continuity equation, the Euler equation, and the Poisson equation become, respectively,


<table border="1" cellpadding="5" align="center" width="75%">
<div align="center" id="GoverningWithStreamFunction">
<tr><td align="center" colspan="1">
<table border="1" align="center" cellpadding="10" width="55%">
[http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber's (1980)] Governing Equations After Initial ''Length'' Scaling (yet to be demonstrated)
<tr><td align="center">
</td></tr>


<tr><td align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{1}{\rho} \frac{d\rho}{dt} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi  \, ;</math>
  </td>
</tr>


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}
<math>~\frac{d\psi}{dt} </math>
+ a^{-2} \nabla_x^2\psi </math>
   </td>
   </td>
   <td align="center">
   <td align="center">
<math>~=</math>
<math>~=</math>
   </td>
   </td>
   <td align="left" width="25%">
   <td align="left">
<math>~0</math>
<math>~\frac{1}{2} a^{-2} ( \nabla_\mathfrak{x} \psi )^2 - H - \Phi  \, ;</math>
   </td>
   </td>
</tr>
</tr>
Line 142: Line 268:
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2  
<math>~a^{-2}\nabla_\mathfrak{x}^2 \Phi </math>
+ H + \Phi</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 149: Line 274:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~0</math>
<math>~4\pi G \rho \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</td></tr>
</table>
</div>
====Reconciling with Goldreich &amp; Weber====
The set of three principal governing equations, as just derived, are intended to match equations (7) - (9) of [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)].  The following is a framed image of equations (7) - (9) as they appear in the Goldreich &amp; Weber publication:


<div align="center">
<table border="2">
<tr>
  <th align="center">
Principal Governing Equations from [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)]
  </th>
</tr>
<tr>
<td>
[[File:GW80Equations.png|500px|center|Goldreich &amp; Weber (1980)]]
</td>
</tr>
</table>
</div>
For discussion purposes, next we will retype this set of equations, altering only the variable names and notation to correspond with ours.  Assuming that we have interpreted their typeset expressions correctly, the governing equations, as derived by Goldreich &amp; Weber, are,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~
<math>~\frac{1}{\rho} \frac{\partial\rho}{\partial t}
a^{-2} \nabla_x^2\Phi - 4\pi G \rho
~+  a^{-1}(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot \frac{\nabla_\mathfrak{x}\rho}{\rho}+~ a^{-2} \nabla_\mathfrak{x}^2 \psi 
</math>
</math>
   </td>
   </td>
Line 163: Line 314:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~0</math>
<math>0 \, ;</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\frac{\partial\psi}{\partial t} - \frac{\dot{a} \mathfrak{x}}{a} \cdot \nabla_\mathfrak{x} \psi~+ \frac{1}{2} a^{-2}( \nabla_\mathfrak{x} \psi )^2
+ H + \Phi </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>0 \, ;</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~a^{-2}\nabla_\mathfrak{x}^2 \Phi - 4\pi G  \rho</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~0 \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</div>
Notice that our expression for the Poisson equation matches the expression presented by Goldreich &amp; Weber, but it isn't immediately obvious whether or not the other two pairs of equations match.  Let's rearrange the terms in Goldreich &amp; Weber's continuity equation and in their Euler equation to emphasize overlap with ours:


<tr><td align="left" colspan="3">
where,
<div align="center">
<div align="center">
<math>~\vec{x} \equiv \frac{\vec{r}}{a} \, ,</math>
<table border="0" cellpadding="5" align="center">
</div>
<tr>
and it is understood that derivatives in the <math>~\nabla_x</math> and <math>~\nabla_x^2</math> operators are taken with respect to the dimensionless radial coordinate, <math>~x</math>.
  <td align="right">
</td></tr>
<math>~\frac{1}{\rho} \biggl[ \frac{\partial\rho}{\partial t}
+ (a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x}\rho \biggr]
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi  \, ;</math>
  </td>
</tr>


<tr>
  <td align="right">
<math>~\frac{\partial\psi}{\partial t} +(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x}\psi</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>\frac{1}{2} a^{-2}( \nabla_\mathfrak{x} \psi )^2 - H - \Phi \, .
</math>
  </td>
</tr>
</table>
</table>
</div>


Written in this way, the righthand-sides of Goldreich &amp; Weber's continuity equation and Euler equation match the righthand-sides of our derived versions of these two equations.  But, in both cases, the lefthand-sides do not match for two reasons:
* Goldreich &amp; Weber express the time-variation of the principal physical variable (either <math>~\rho</math> or <math>~\psi</math>) as a ''partial'' derivative &#8212; traditionally denoting an Eulerian perspective of the flow &#8212; while we have chosen to express the time-variation of both variables as a ''total'' derivative &#8212; to denote a Lagrangian perspective of the flow;
* Goldreich &amp; Weber include a term in which the principal physical variable (either <math>~\rho</math> or <math>~\psi</math>) is being acted upon by the operator,
<table border="0" cellpadding="10" align="center">
<tr><td align="center">
<math>(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x} </math>
</td></tr>
</td></tr>
</table>
</table>
In order to reconcile these differences, we remember, first, the [[User:Tohline/Apps/GoldreichWeber80#TimeDerivativeTransformation|operator transformation (familiar to fluid dynamicists) used previously]],
<div align="center">
<math>~\frac{d}{dt}  ~~ \rightarrow ~~ \frac{\partial}{\partial t} + \vec{v}_T\cdot \nabla </math>
</div>
where we have added a subscript <math>~T</math> to the velocity in order to emphasize that, in this context, <math>~\vec{v}</math> is a "transport" velocity measuring the fluid velocity ''relative to'' the adopted coordinate frame.  Now, the radial velocity of the fluid (as measured in the inertial frame) is derivable from the stream function via the expression,
<div align="center">
<math>v_r = \nabla_r\psi = a^{-1} \nabla_\mathfrak{x}\psi \, ;</math>
</div>
while the radial velocity of the coordinate frame that has been adopted by Goldreich &amp; Weber is <math>~\dot{a}\mathfrak{x}</math>.  Hence, as measured in the radially collapsing coordinate frame, the magnitude of the (radially directed) transport velocity is,
<div align="center">
<math>|\vec{v}_T| = (a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x}) \, .</math>
</div>
It is therefore clear that the lefthand-sides of the continuity and Euler equations, as presented by Goldreich &amp; Weber, are simply the operator,
<div align="center">
<math>~ \frac{\partial}{\partial t} + |\vec{v}_T| a^{-1} \nabla_\mathfrak{x} </math>
</div>
acting on <math>~\rho</math> and <math>~\psi</math>, respectively.  The lefthand sides of these equations ''do'', therefore, represent exactly the same physics as the lefthand sides of the equations we have derived.


Finally, it should be appreciated that, if the evolutionary flow throughout the collapsing configuration is simple enough that a single scalar function, <math>a(t)</math>, suffices to track the location of all fluid elements simultaneously, then <math>~|\vec{v}_T|</math> will be zero everywhere and at all times.  And the time-variation of the primary variables as deduced from Goldriech &amp; Weber's Eulerian perspective will be identical to the time-variation of the primary variables as deduced from our Lagrangian perspective.  This is precisely the outcome achieved via the similarity solution discovered by Goldreich &amp; Weber.
====Mass-Density and Speed====


Next, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 10) choose to normalize the density by the central density, specifically defining a dimensionless function,
Next, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 10) choose to normalize the density by the central density, specifically defining a dimensionless function,
<div align="center">
<div align="center">
<math>f \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} \, .</math>
<math>f \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} \, ,</math>
</div>
</div>
Keeping in mind that <math>~n = 3</math>, this is also in line with the formulation and evaluation of the [[User:Tohline/SSC/Structure/Polytropes#Lane-Emden_equation|Lane-Emden equation]], where the primary ''dependent'' structural variable is the dimensionless polytropic enthalpy,  
which, in order to successfully identify a similarity solution, may be a function of space but not of time.  Keeping in mind that <math>~n = 3</math>, this is also in line with the formulation and evaluation of the [[User:Tohline/SSC/Structure/Polytropes#Lane-Emden_equation|Lane-Emden equation]], where the primary ''dependent'' structural variable is the dimensionless polytropic enthalpy,  
<div align="center">
<div align="center">
<math>\Theta_H \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/n} \, .</math>
<math>\Theta_H \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/n} \, .</math>
</div>
</div>


Finally, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 11) normalize the gravitational potential to the square of the central sound speed,
Also, [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 11) normalize the gravitational potential to the square of the central sound speed,
<div align="center">
<div align="center">
<math>c_s^2 = \frac{\gamma P_c}{\rho_c} = \frac{4}{3} \kappa \rho_c^{1/3}  
<math>c_s^2 = \frac{\gamma P_c}{\rho_c} = \frac{4}{3} \kappa \rho_c^{1/3}  
Line 206: Line 435:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \Phi \, .</math>
<math>~\frac{\Phi}{c_s^2} = \biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \Phi \, ,</math>
  </td>
</tr>
</table>
</div>
and the similarly normalized enthalpy may be written as,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{H}{c_s^2} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] 4\kappa \rho^{1/3} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~3 \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~3f \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
With these additional scalings, our continuity equation becomes,


With these additional scalings, the continuity equation becomes,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{\partial}{\partial t} \biggl[ \ln \biggl(\frac{f}{a} \biggr)^3 \biggr]</math>
<math>~\cancelto{0}{\frac{d\ln f^3}{dt}} \frac{d\ln \rho_c}{dt}</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 223: Line 493:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~ a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \nabla_x(\ln f^3)
<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi \, ,</math>
- a^{-2} \nabla_x^2\psi \, ;</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
the Euler equation becomes,
 
where the first term on the lefthand side has been set to zero because, as stated above, <math>~f</math> may be a function of space but not of time; our Euler equation becomes,
 
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~
\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] 
\biggl[ \frac{d\psi}{dt} - \frac{1}{2a^2} ( \nabla_\mathfrak{x} \psi )^2 \biggr]
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~ - 3 f - \sigma  \, ;</math>
  </td>
</tr>
</table>
</div>
and the Poisson equation becomes,
<div align="center">
<math>\nabla_\mathfrak{x}^2 \sigma = 3f^3 \, .</math>
</div>


===Homologous Solution===
[http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] discovered that the governing equations admit to an homologous, self-similar solution if they adopted a stream function of the form,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2</math>
<math>~\psi</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 241: Line 537:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~  
<math>~\frac{1}{2}a \dot{a} \mathfrak{x}^2 \, ,</math>
- a^{-1} \biggl[ \frac{4}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \biggr] (3f + \sigma)
\, ;</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
and the Poisson equation becomes,
which, when acted upon by the various relevant operators, gives,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
Line 254: Line 548:
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{4}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} a^{-3} \nabla_x^2\sigma</math>
<math>~\nabla_\mathfrak{x}\psi</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 260: Line 554:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~4\pi G\biggl( \frac{\kappa}{\pi G} \biggr)^{3/2} a^{-3} f^3 </math>
<math>~a \dot{a} \mathfrak{x} \, ,</math>
   </td>
   </td>
</tr>
</tr>
Line 266: Line 560:
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\Rightarrow~~~~\nabla_x^2\sigma</math>
<math>~\nabla^2_\mathfrak{x}\psi</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 272: Line 566:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~3 f^3 \, .</math>
<math>~
\biggl( \frac{1}{2}a \dot{a} \biggr) \frac{1}{\mathfrak{x}^2} \frac{d}{d\mathfrak{x}} \biggl[\mathfrak{x}^2 \frac{d}{d\mathfrak{x}}  \mathfrak{x}^2 \biggr]
= 3 a \dot{a} \, ,
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\frac{d\psi}{dt}</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\mathfrak{x}^2 \biggl[ \frac{1}{2}\dot{a}^2 + \frac{1}{2}a\ddot{a} \biggr] \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
 
Hence, the radial velocity profile is,
===Homologous Solution===
[http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] discovered that the governing equations admit to an homologous, self-similar solution if they adopted a stream function of the form,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\psi</math>
<math>~v_r = a^{-1}\nabla_\mathfrak{x} \psi</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 290: Line 597:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\frac{1}{2}a \dot{a} x^2 \, ,</math>
<math>~\dot{a}\mathfrak{x} \, ,
</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
which generates a radial velocity profile,
which, as foreshadowed above, exactly matches the radial velocity of the collapsing coordinate frame; the continuity equation gives,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\vec{v} = a^{-1}\nabla_x \psi</math>
<math>~\frac{d\ln \rho_c}{dt} </math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 306: Line 614:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\hat{e}_x a^{-1} \biggl[ \frac{\partial}{\partial x} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr)\biggr]  = \dot{a} \vec{x} \, .
<math>-~ \frac{3\dot{a}}{a} </math>
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>\Rightarrow~~~~\frac{d\ln \rho_c}{dt} + \frac{d\ln a^3}{dt} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~0 \, ,</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
Recognizing, as well, that,
which means that, consistent with the expected relationship between the central density and the time-varying length scale [[User:Tohline/Apps/GoldreichWeber80#Length|established above]], the product, <math>~a^3 \rho_c</math>, is independent of time; and the Euler equation becomes,
 
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~ - 3 f - \sigma </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~
\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] 
\biggl\{ \mathfrak{x}^2 \biggl[ \frac{1}{2}\dot{a}^2 + \frac{1}{2}a\ddot{a} \biggr]  -
\frac{1}{2} ( \dot{a} \mathfrak{x} )^2 \biggr\}
</math>
  </td>
</tr>


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~a^{-2} \nabla_x^2 \psi </math>
&nbsp;
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 324: Line 659:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\frac{1}{(ax)^2} \frac{\partial}{\partial x} \biggl[ x^2\frac{\partial }{\partial x} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr)\biggr] </math>
<math>~
\frac{3}{8} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2}   (a \mathfrak{x})^2 \ddot{a}
</math>
   </td>
   </td>
</tr>
</tr>
Line 330: Line 667:
<tr>
<tr>
   <td align="right">
   <td align="right">
&nbsp;
<math>~\Rightarrow~~~~ \frac{(f + \sigma/3)}{\mathfrak{x}^2} </math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 336: Line 673:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~ \biggl( \frac{\dot{a}}{a} \biggr) \frac{1}{x^2}
<math>~
\frac{\partial}{\partial x} \biggl[ x^3\biggr] = \frac{3\dot{a}}{a} = \frac{d\ln a^3}{dt} \, ,</math>
- \frac{1}{8} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2}   a^2 \ddot{a} \, .
</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
the continuity equation becomes,
This matches equation (12) of [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)].
 
Because everything on the lefthand side of this scaled Euler equation depends only on the dimensionless spatial coordinate, <math>~\mathfrak{x}</math>, while everything on the righthand side depends only on time &#8212; via the parameter, <math>~a(t)</math> &#8212; both expressions must equal the same (dimensionless) constant.  [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 12) call this constant, <math>~\lambda/6</math>.  From the terms on the lefthand side, they conclude (see their equation 13) that the dimensionless gravitational potential is,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\frac{\partial \ln f^3}{\partial t}  - \frac{d \ln a^3}{dt} </math>
<math>~\sigma</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 354: Line 694:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~- \frac{d \ln a^3}{dt} </math>
<math>~\frac{1}{2} \lambda ~\mathfrak{x}^2 - 3f \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</div>
From the terms on the righthand side they conclude, furthermore, that the nonlinear differential equation governing the time-dependent variation of the scale length, <math>~a</math>, is,
<div align="center">
<table border="0" cellpadding="5" align="center">


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\Rightarrow ~~~ \frac{\partial \ln f^3}{\partial t} </math>
<math>~
a^2 \ddot{a}  
</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 366: Line 713:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~0 \, ,</math>
<math>~-~\frac{4\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
that is, the dimensionless density profile, <math>~f</math>, is independent of time.  With the adopted stream function, the Euler equation becomes,


<div align="center">
 
 
{{LSU_WorkInProgress}}
 
<table border="1" cellpadding="10" align="center" width="75%">
<tr><td align="left">
As [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] point out, this nonlinear differential equation can be integrated twice to produce an algebraic relationship between <math>~a</math> and time, <math>~t</math>.  The required mathematical steps are identical to the steps used to analytically solve the [[User:Tohline/ProjectsUnderway/Core_Collapse_Supernovae#Nonrotating.2C_Spherically_Symmetric_Collapse|classic, spherically symmetric free-fall collapse problem]].  First, rewrite the equation as,
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~  
<math>~
- a^{-1} \biggl[ 4\biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \biggr] \biggl(f + \frac{\sigma}{3} \biggr)
\frac{d \dot{a} }{dt}
</math>
</math>
   </td>
   </td>
Line 386: Line 738:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\frac{\partial }{\partial t} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr) - \dot{a}^2 x^2
<math>~-\frac{B}{2a^2} \, , </math>
+ \dot{a}^2 x^2</math>
   </td>
   </td>
</tr>
</tr>
</table>
where,
<div align="center">
<math>
~B \equiv \frac{8\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2}  \, ,
</math>
</div>
has the same dimensions as the product, <math>~GM</math> (see the  [[User:Tohline/ProjectsUnderway/Core_Collapse_Supernovae#Nonrotating.2C_Spherically_Symmetric_Collapse|free-fall collapse problem]]), that is, the dimensions of "length-cubed per unit time-squared."  Then, multiply both sides by <math>~2\dot{a} = 2(da/dt)</math> to obtain,
<table border="0" cellpadding="5" align="center">


<tr>
<tr>
   <td align="right">
   <td align="right">
&nbsp;
<math>~
2\dot{a} \frac{d\dot{a}}{dt}
</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 399: Line 762:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\frac{x^2}{2} \frac{d }{dt} \biggl( a \dot{a} \biggr) </math>
<math>~-B \biggl( a^{-2} \frac{da}{dt} \biggr) </math>
   </td>
   </td>
</tr>
</tr>
Line 406: Line 769:
   <td align="right">
   <td align="right">
<math>~\Rightarrow~~~~
<math>~\Rightarrow~~~~
\frac{1}{x^2} \biggl(f + \frac{\sigma}{3} \biggr)
\frac{d\dot{a}^2}{dt}
</math>
</math>
   </td>
   </td>
Line 413: Line 776:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a \frac{d }{dt} \biggl( a \dot{a} \biggr) </math>
<math>~B \frac{d}{dt} \biggl( \frac{1}{a} \biggr) \, ,</math>
   </td>
   </td>
</tr>
</tr>


</table>
which integrates once to give,
<div align="center">
<math>
~\dot{a}^2 = \frac{B}{a} + C \, ,
</math>
</div>
or,
<div align="center">
<math>
~dt = \biggl( \frac{B}{a} + C \biggr)^{-1/2} da  \, .
</math>
</div>
For the case, <math>~C = 0</math>, this differential equation can be integrated straightforwardly to give (see Goldreich &amp; Weber's equation 15),
For the cases when <math>~C \ne 0</math>, [http://integrals.wolfram.com/index.jsp Wolfram Mathematica's online integrator] can be called upon to integrate this equation and provide the following closed-form solution,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
&nbsp;
<math>~t</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\frac{a}{C} \biggl( \frac{B}{a} + C \biggr)^{1/2}
- \frac{B}{2C^{3/2}} \ln \biggl[2aC^{1/2}  \biggl( \frac{B}{a} + C \biggr)^{1/2}  + B + 2aC \biggr] \, .
</math>
  </td>
</tr>
</table>
</div>
 
 
</td></tr>
</table>
 
 
As [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] point out, because all terms in this equation are inside the gradient operator, the sum of the terms inside the square brackets must equal a constant &#8212; that is, the sum must be independent of spatial position throughout the spherically symmetric configuration.  If, following Goldreich &amp; Weber's lead, we simply fold this integration constant into the potential, the Euler equation becomes (see their equation 8),
<div align="center">
<table border="0" cellpadding="5" align="center">
 
<tr>
  <td align="right">
<math>~\frac{\partial \psi}{\partial t}  - \biggl( \frac{\dot{a}}{a} \biggr)\psi +
H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi  \biggr)^2 </math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 425: Line 834:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a ( \dot{a}^2 + a \ddot{a}) \, .</math>
<math>~0 \, .</math>
  </td>
</tr>
</table>
</div>
 
<div align="center">
<table border="0" cellpadding="5">
 
<tr>
  <td align="right">
<math>~\frac{\partial \rho}{\partial t} + \rho \nabla_r \cdot \vec{v} + \vec{v}\cdot \nabla_r \rho</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left" width="25%">
<math>~0</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + \nabla_r \cdot \vec{v} + \vec{v}\cdot \frac{\nabla_r \rho}{\rho}</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left" width="25%">
<math>~0</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1} \nabla_x \cdot \biggl[  a^{-1} \nabla_x \psi \biggr]  
+ a^{-1} \nabla_x \psi  \cdot \frac{a^{-1}\nabla_x \rho}{\rho}</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left" width="25%">
<math>~0</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}
+ a^{-2} \nabla_x^2\psi </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left" width="25%">
<math>~0</math>
   </td>
   </td>
</tr>
</tr>
Line 433: Line 897:
<table border="1" cellpadding="5" align="center" width="75%">
<table border="1" cellpadding="5" align="center" width="75%">
<tr><td align="center" colspan="1">
<tr><td align="center" colspan="1">
[http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber's (1980)] Euler Equation after all Scaling (yet to be demonstrated)
[http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber's (1980)] Governing Equations After Initial ''Length'' Scaling (yet to be demonstrated)
</td></tr>
</td></tr>


<tr><td align="left">
<tr><td align="center">
<table border="0" cellpadding="5" align="center">


<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}
+ a^{-2} \nabla_x^2\psi </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left" width="25%">
<math>~0</math>
  </td>
</tr>


<tr>
  <td align="right">
<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2
+ H + \Phi</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~0</math>
  </td>
</tr>


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~
<math>~
\frac{1}{x^2} \biggl(f + \frac{\sigma}{3} \biggr)
a^{-2} \nabla_x^2\Phi - 4\pi G \rho
</math>
</math>
   </td>
   </td>
Line 451: Line 939:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a^2 \ddot{a} </math>
<math>~0</math>
   </td>
   </td>
</tr>
</tr>
<tr><td align="left" colspan="3">
where,
<div align="center">
<math>~\vec{x} \equiv \frac{\vec{r}}{a} \, ,</math>
</div>
and it is understood that derivatives in the <math>~\nabla_x</math> and <math>~\nabla_x^2</math> operators are taken with respect to the dimensionless radial coordinate, <math>~x</math>.
</td></tr>


</table>
</table>


Note that the right-hand-side of this expression differs from ours, so we need to identify and correct the discrepency.
</td></tr>
</td></tr>
</table>
</table>
Because everything on the left-hand-side of Goldreich &amp; Weber's scaled Euler equation depends only on the dimensionless spatial coordinate, <math>~x</math>, while everything on the right-hand-side depends only on time &#8212; via the parameter, <math>~a(t)</math> &#8212; both expressions must equal the same constant. [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] (see their equation 12) call this constant, <math>~\lambda/6</math>. They conclude, therefore, (see their equation 13) that the dimensionless gravitational potential is,
 
<!-- BEGIN PK07 ASIDE
 
 
<div align="center">
<table border="1" width="90%" cellpadding="8">
<tr><td align="left">
<font color="red">'''ASIDE:'''</font>  It wasn't immediately obvious to me how the set of differential governing equations should be modified in order to accommodate a radially contracting (accelerating) coordinate system.  I did not understand the transformed set of equations presented by Goldreich &amp; Weber as equations (7) and (8), for example.  I turned to [http://www.sciencedirect.com/science/article/pii/S0021999106002555 Poludnenko &amp; Khokhlov (2007, Journal of Computational Physics, 220, 678)] &#8212; hereafter, PK07 &#8212; for guidance.  PK07 develop a set of governing equations that allows for coordinate rotation as well as expansion or contraction; here we will ignore any modifications due to rotation.
 
We note, first, that PK07 (see their equation 4) adopt an accelerated radial coordinate of the same form as Goldreich &amp; Weber,
<div align="center">
<math>~\tilde{r} \equiv \biggl[ \frac{1}{a(t)} \biggr] \vec{r} \, ,</math>
</div>
but the PK07 time-dependent scale factor is dimensionless, whereas the scale factor adopted by Goldreich &amp; Weber &#8212; denoted here as <math>~a_{GW}(t)</math> &#8212; has units of length.  To transform from the KP07 notation, we ultimately will set,
<div align="center">
<math>~\mathfrak{x} = \frac{1}{a_0} \tilde{r} ~~~~~\Rightarrow ~~~~~ a_{GW}(t) = a_0 a(t) \, ,</math>
</div>
where, <math>~a_0</math> is understood to be the Goldreich &amp; Weber scale length at the onset of collapse, that is, at <math>~t = 0</math>.  According to PK07, this leads to a new "accelerated" time (see, again, their equation 4 with the exponent, <math>~\beta = 0</math>)
<div align="center">
<math>~\tau \equiv \int_0^t \frac{dt}{a(t)} \, .</math>
</div>
According to equation (7) of PK07 &#8212; again, setting their exponent <math>~\beta=0</math> &#8212; the relationship between the fluid velocity in the inertial frame, <math>~\vec{v}</math>, to the fluid velocity measured in the accelerated frame, <math>~\tilde{v}</math>, is
<div align="center">
<math>~\vec{v} = \tilde{v} + \biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde{r} \, .</math>
</div>
We note that, according to equation (8) of PK07, the first derivative of <math>~a(t)</math> with respect to ''physical'' time is,
<div align="center">
<div align="center">
<math>~\dot{a} = \frac{d\ln a}{d\tau} \, ,</math>
</div>
so the transformation between velocities may equally well be written as,
<div align="center">
<math>~\vec{v} = \tilde{v} + \dot{a} \tilde{r} \, ;</math>
</div>
and we note that (see equation 9 of PK07),
<div align="center">
<math>~\ddot{a} = \frac{1}{a} \biggl[ \frac{d^2\ln a}{d\tau^2} \biggr] \, .</math>
</div>
Next, we note that Goldreich &amp; Weber introduce a variable to track the dimensionless density,
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~\sigma</math>
<math>~f^3</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 471: Line 1,005:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~\frac{\lambda x^2}{2} - 3f \, .</math>
<math>~\biggl( \frac{\rho}{\rho_c} \biggr) = \biggl( \frac{\pi G}{\kappa} \biggr)^{3/2} [a_{GW}(t)]^3 \rho \, .</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
Comparing this to equation (10) of PK07, which introduces a density field, <math>~\tilde\rho</math>, as viewed in the accelerated frame of reference of the form,
<div align="center">
<math>~\tilde\rho = [a(t)]^\alpha \rho \, ,</math>
</div>
</div>
Also, the nonlinear differential equation governing the time-dependent variation of the scale length, <math>~a</math>, is,
we see that, by setting the exponent <math>~\alpha = 3</math>, the Goldreich &amp; Weber dimensionless density can be retrieved from the PK07 work by setting,
<div align="center">
<math>~f^3= \frac{\tilde\rho}{\rho_0} \, ,</math>
</div>
where,
<div align="center">
<math>~\rho_0 \equiv \biggl( \frac{\kappa}{\pi G a_0^2} \biggr)^{3/2} \, .</math>
</div>
PK07 then claim that, in the accelerating reference frame, the continuity equation and Euler equation become, respectively,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
Line 482: Line 1,027:
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~
<math>~\frac{\partial \tilde\rho}{\partial \tau} + \tilde{\nabla}\cdot(\tilde\rho \tilde{v})</math>
a^2 \ddot{a}  
  </td>
</math>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(3-\nu)\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho \, ,</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\frac{\partial \tilde\rho \tilde{v} }{\partial \tau} + \tilde{\nabla} \cdot(\tilde\rho \tilde{v} \tilde{v})  </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(2-\nu)\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho \tilde{v} -
\biggl[ \frac{d^2\ln a}{d\tau^2} \biggr] \tilde\rho \tilde{r} - \tilde{\nabla}\tilde{P} \, ,</math>
  </td>
</tr>
</table>
</div>
where PK07 have introduced <math>~\nu</math> as a "dimensionality parameter of the problem."  In an effort to rewrite the left-hand-side of PK07's Euler equation in a form that matches Goldreich &amp; Weber's Euler equation, we note that,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\nabla\cdot [(\tilde\rho \tilde{v}) \tilde{v}]</math>
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 490: Line 1,062:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-~\frac{4\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, .</math>
<math>~\tilde\rho(\tilde{v}\cdot \tilde\nabla) \tilde{v} + \tilde{v}[\tilde\nabla \cdot (\tilde\rho \tilde{v})] \, ,</math>
   </td>
   </td>
</tr>
</tr>
</table>
</table>
</div>
</div>
and, with the help of the PK07 continuity equation,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{\partial (\tilde\rho \tilde{v})}{\partial\tau}</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\tilde\rho \frac{\partial \tilde{v}}{\partial\tau} + \tilde{v} \frac{\partial \tilde\rho}{\partial\tau} </math>
  </td>
</tr>


<table border="1" cellpadding="8" align="center" width="75%">
<tr>
<tr><td align="left">
  <td align="right">
As [http://adsabs.harvard.edu/abs/1980ApJ...238..991G Goldreich &amp; Weber (1980)] point out, this nonlinear differential equation can be integrated twice to produce an algebraic relationship between <math>~a</math> and time, <math>~t</math>.  First, rewrite the equation as,
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\tilde\rho \frac{\partial \tilde{v}}{\partial\tau} + \tilde{v} \biggl[  
(3-\nu)\biggl( \frac{d\ln a}{d\tau} \biggr) \tilde\rho
- \tilde{\nabla}\cdot(\tilde\rho \tilde{v})
\biggr] \, .</math>
  </td>
</tr>
</table>
</div>
Hence, the Euler equation becomes,
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~
<math>~ \tilde\rho \frac{\partial \tilde{v}}{\partial\tau} 
\frac{d \dot{a} }{dt}
+ \tilde\rho(\tilde{v}\cdot \tilde\nabla) \tilde{v}
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho \tilde{v} -
\biggl[ \frac{d^2\ln a}{d\tau^2} \biggr] \tilde\rho \tilde{r} - \tilde{\nabla}\tilde{P} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~ \Rightarrow ~~~ \frac{\partial \tilde{v}}{\partial\tau}  + (\tilde{v}\cdot \tilde\nabla) \tilde{v}
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~\dot{a} \tilde{v} -
a \ddot{a} \tilde{r} - \tilde{\nabla}\tilde{H} \, .</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~ \Rightarrow ~~~ \frac{\partial \tilde{v}}{\partial\tau}  + \frac{1}{2} \tilde\nabla({\tilde{v}} \cdot \tilde{v} ) + \tilde{\zeta}\times \tilde{v}
</math>
</math>
   </td>
   </td>
Line 511: Line 1,141:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-\frac{B}{2a^2} \, , </math>
<math>~-~\dot{a} \tilde{v} -
a \ddot{a} \tilde{r} - \tilde{\nabla}\tilde{H} \, ,</math>
  </td>
</tr>
</table>
</div>
where the vector identity that has been used to obtain this last expression has been drawn from our [[User:Tohline/PGE/Euler#in_terms_of_the_vorticity:|separate presentation of the Euler equation written in terms of the fluid vorticity]], <math>~\tilde\zeta \equiv \tilde\nabla \times \tilde{v}</math>. 
 
----
Now, let's shift to ''physical'' parameters &#8212; or example,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\tilde{v}</math>
  </td>
  <td align="center">
<math>~~~\rightarrow~~~</math>
  </td>
  <td align="left">
<math>~\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} = \vec{v} - \dot{a} \tilde{r} ~~ \, ;</math>
   </td>
   </td>
</tr>
</tr>


<tr>
  <td align="right">
<math>~\frac{\partial}{\partial\tau}</math>
  </td>
  <td align="center">
<math>~~~\rightarrow~~~</math>
  </td>
  <td align="left">
<math>~\frac{\partial t}{\partial\tau} \frac{\partial}{\partial t} = a \frac{\partial}{\partial t} </math>
  </td>
</tr>
</table>
</table>
where,
</div>
&#8212; and, following Goldreich & Weber, set the vorticity to zero.  The Euler equation becomes,
<div align="center">
<div align="center">
<math>
<table border="0" cellpadding="5" align="center">
~B \equiv \frac{8\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, .
 
<tr>
  <td align="right">
<math>~\frac{\partial }{\partial t}  \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
+ \frac{1}{2}a^{-1} \tilde\nabla \biggl[ \biggl( \vec{v} - \dot{a} \tilde{r} \biggr) \cdot \biggl( \vec{v} - \dot{a} \tilde{r} \biggr) \biggr] 
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~\frac{\dot{a}}{a} \biggl( \vec{v} - \dot{a} \tilde{r} \biggr)  -
\ddot{a} \tilde{r} - a^{-1}\tilde{\nabla}\tilde{H} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow ~~~~
\frac{\partial \vec{v} }{\partial t}  - \biggl[ \biggl(\frac{\dot{a}}{a} \biggr)\frac{\partial\vec{r}}{\partial t} + \frac{\ddot{a}}{a} \vec{r} - \biggl( \frac{\dot{a}}{a}\biggr)^2 \vec{r} \biggr]
+ \frac{1}{2}a^{-1} \tilde\nabla \biggl[ \vec{v} \cdot \vec{v} -2\dot{a} \vec{v} \tilde{r} + (\dot{a} \tilde{r} )^2 \biggr] 
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~-~\frac{\dot{a}}{a} \biggl( \vec{v} - \frac{\dot{a}}{a} \vec{r} \biggr)  -
\frac{\ddot{a}}{a} \vec{r} - a^{-1}\tilde{\nabla}\tilde{H} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow ~~~~
\frac{\partial \vec{v} }{\partial t} 
+ \frac{1}{2}a^{-1} \tilde\nabla \biggl[ \vec{v} \cdot \vec{v} -2\dot{a} \vec{v} \tilde{r} + (\dot{a} \tilde{r} )^2 \biggr] 
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>\frac{\dot{a}}{a} \biggl(\frac{\partial\vec{r}}{\partial t} - \vec{v} \biggr) - a^{-1}\tilde{\nabla}\tilde{H}</math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow ~~~~
\frac{\partial \vec{v} }{\partial t} 
+ a^{-1} \tilde\nabla \biggl[ \frac{1}{2}(\vec{v} \cdot \vec{v}) - \dot{a} \vec{v} \tilde{r} + \tilde{H} \biggr]  + \biggl( \frac{\dot{a}}{a} \biggr)^2 \vec{r}
</math>
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>\frac{\dot{a}}{a} \biggl(\frac{\partial\vec{r}}{\partial t} - \vec{v} \biggr)  \, .</math>
  </td>
</tr>
</table>
</div>
</div>
Then, multiply both sides by <math>~2\dot{a} = 2da/dt</math> to obtain,
 
Now, let's tackle the continuity equation:
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">


<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~
<math>~\frac{\partial \tilde\rho}{\partial \tau} + \tilde\rho \tilde{\nabla}\cdot \tilde{v} + \tilde{v} \cdot \tilde\nabla \tilde\rho  </math>
2\dot{a} \frac{d\dot{a}}{dt}
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(3-\nu)\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow~~~~\frac{a}{\tilde\rho}\frac{\partial \tilde\rho}{\partial t} + \tilde{\nabla}\cdot \tilde{v} + \tilde{v} \cdot \frac{\tilde\nabla \tilde\rho}{\tilde\rho}  </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(3-\nu) \dot{a} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow~~~~
\frac{a}{\tilde\rho}\frac{\partial \tilde\rho}{\partial t}
+ (\vec{v} - \dot{a}\tilde{r})\cdot \frac{\tilde\nabla \tilde\rho}{\tilde\rho} 
+ \tilde{\nabla}\cdot (\vec{v} - \dot{a}\tilde{r})
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(3-\nu) \dot{a} </math>
  </td>
</tr>
 
<tr>
  <td align="right">
<math>~\Rightarrow~~~~
\frac{1}{a^3\rho}\frac{\partial (a^3\rho)}{\partial t}
+ a^{-1}(\vec{v} - \dot{a}\tilde{r})\cdot \frac{\tilde\nabla \rho}{\rho} 
+ a^{-1}\tilde{\nabla}\cdot \vec{v}  
</math>
</math>
   </td>
   </td>
Line 535: Line 1,301:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~-B \biggl( a^{-2} \frac{da}{dt} \biggr) </math>
<math>~(3-\nu) \frac{\dot{a}}{a}  + a^{-1}\tilde{\nabla}\cdot (\dot{a}\tilde{r})  
</math>
   </td>
   </td>
</tr>
</tr>
Line 542: Line 1,309:
   <td align="right">
   <td align="right">
<math>~\Rightarrow~~~~
<math>~\Rightarrow~~~~
\frac{d\dot{a}^2}{dt}
\frac{1}{\rho}\frac{\partial \rho}{\partial t}
+ a^{-1}(\vec{v} - \dot{a}\tilde{r})\cdot \frac{\tilde\nabla \rho}{\rho} 
+ a^{-1}\tilde{\nabla}\cdot \vec{v}
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~(3-\nu) \frac{\dot{a}}{a}  + a^{-1}\tilde{\nabla}\cdot (\dot{a}\tilde{r}) -3 \frac{\dot{a}}{a}
</math>
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 549: Line 1,331:
   </td>
   </td>
   <td align="left">
   <td align="left">
<math>~B \frac{d}{dt} \biggl( \frac{1}{a} \biggr) </math>
<math>~\frac{\dot{a}}{a} (\tilde{\nabla}\cdot \tilde{r}-\nu)
</math>
   </td>
   </td>
</tr>
</tr>


</table>
</table>
which integrates once to give,
</div>
If we set <math>~\nu = 3</math>, this last expression appears to match equation (7) of Goldreich &amp; Weber.
 
 
 
 
----
With the aid of the continuity equation, the left-hand-side of the Euler equation can be rewritten as,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\frac{\partial \tilde\rho \tilde{v} }{\partial \tau} + \tilde{\nabla} \cdot(\tilde\rho \tilde{v} \tilde{v})  </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
<math>
~\dot{a}^2 = \frac{B}{a} + C \, ,
\biggl[ \tilde\rho \frac{\partial \tilde{v} }{\partial \tau} + \tilde{v} \frac{\partial \tilde\rho }{\partial \tau} \biggr] +
\biggl[ (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} + (\tilde\rho \tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr]
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\tilde\rho \frac{\partial \tilde{v} }{\partial \tau} +
\biggl[(3-\nu)\biggl( \frac{d\ln a}{d\tau} \biggr) \tilde\rho \tilde{v}  - (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} \biggr] +
\biggl[ (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} + (\tilde\rho \tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr]
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\tilde\rho \biggl[ \frac{\partial \tilde{v} }{\partial \tau} +
(3-\nu)\biggl( \frac{d\ln a}{d\tau} \biggr) \tilde{v}  +  
(\tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr] \, .
</math>
</math>
  </td>
</tr>
</table>
</div>
</div>
or,
Hence, the Euler equation becomes,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>
<math>
~dt = \biggl( \frac{B}{a} + C \biggr)^{-1/2} da  \, .
\frac{\partial \tilde{v} }{\partial \tau}
+ (\tilde{v} \cdot \tilde{\nabla})\tilde{v}
+ \biggl( \frac{d\ln a}{d\tau} \biggr) \tilde{v} 
+ \biggl( \frac{d^2\ln a}{d\tau^2} \biggr) \tilde{r}
</math>
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~ - \frac{\tilde{\nabla}\tilde{P}}{\tilde\rho} \, .</math>
  </td>
</tr>
</table>
</div>
</div>


For the case, <math>~C = 0</math>, this differential equation can be integrated straightforwardly to give (see Goldreich &amp; Weber's equation 15),
----
Now, let's shift to ''physical'' parameters.  For example,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~\tilde{v}</math>
  </td>
  <td align="center">
<math>~~~\rightarrow~~~</math>
  </td>
  <td align="left">
<math>~\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \, ;</math>
  </td>
</tr>


<tr>
  <td align="right">
<math>~\frac{\partial}{\partial\tau}</math>
  </td>
  <td align="center">
<math>~~~\rightarrow~~~</math>
  </td>
  <td align="left">
<math>~\frac{\partial t}{\partial\tau} \frac{\partial}{\partial t} = a \frac{\partial}{\partial t} \, .</math>
  </td>
</tr>
</table>
</div>


 
Hence, the Euler equation becomes,
For the cases when <math>~C \ne 0</math>, [http://integrals.wolfram.com/index.jsp Wolfram Mathematica's online integrator] can be called upon to integrate this equation and provide the following closed-form solution,
<div align="center">
<div align="center">
<table border="0" cellpadding="5" align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~ - \tilde{\nabla}\tilde{H} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
a\frac{\partial}{\partial t} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
+ (\tilde{v} \cdot \tilde{\nabla})\tilde{v}
+ \dot{a} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] 
+ \ddot{a} \vec{r}
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>a\frac{\partial \vec{v} }{\partial t} -
a \biggl[ \biggl(\frac{\ddot{a}}{a} \biggr) \vec{r} - \biggl(\frac{\dot{a}}{a} \biggr)^2 \vec{r} + \biggl(\frac{\dot{a}}{a} \biggr) \frac{\partial \vec{r} }{\partial t} \biggr]
+ (\tilde{v} \cdot \tilde{\nabla})\tilde{v}
+ \dot{a} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] 
+ \ddot{a} \vec{r}
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>a\frac{\partial \vec{v} }{\partial t} + (\tilde{v} \cdot \tilde{\nabla})\tilde{v}
+ \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] 
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] 
+ \biggl\{\biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggr\} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] 
+ (\vec{v} \cdot \tilde\nabla)\biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r}  \cdot \tilde{\nabla}
\biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
</math>
  </td>
</tr>
<tr>
<tr>
   <td align="right">
   <td align="right">
<math>~t</math>
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\biggl\{ a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] 
+ (\vec{v} \cdot \tilde\nabla)\vec{v}
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r}  \cdot \tilde{\nabla} \vec{v} \biggr\}
- (\vec{v} \cdot \tilde\nabla)\biggl[ \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
+ \biggl(\frac{\dot{a}}{a} \biggr) \vec{r}  \cdot \tilde{\nabla} \biggl[\biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\biggl\{ a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] 
+ (\vec{v} \cdot \tilde\nabla)\vec{v}
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r}  \cdot \tilde{\nabla} \vec{v} \biggr\}
- \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggl[\dot{a} \tilde{r}  \biggr]
</math>
  </td>
</tr>
 
<tr>
  <td align="right">
&nbsp;
   </td>
   </td>
   <td align="center">
   <td align="center">
Line 583: Line 1,575:
   <td align="left">
   <td align="left">
<math>
<math>
\frac{a}{C} \biggl( \frac{B}{a} + C \biggr)^{1/2}
\biggl\{ a\frac{\partial \vec{v} }{\partial t}  + (\vec{v} \cdot \tilde\nabla)\vec{v}  
- \frac{B}{2C^{3/2}} \ln \biggl[2aC^{1/2} \biggl( \frac{B}{a} + C \biggr)^{1/2+ B + 2aC \biggr] \, .
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r}  \cdot \tilde{\nabla} \vec{v} \biggr\}
+ \dot{a} \biggl\{ \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr]
- \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggl[\tilde{r}  \biggr] \biggr\}
</math>
</math>
   </td>
   </td>
Line 591: Line 1,585:
</div>
</div>


And the continuity equation becomes,
<div align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="right">
<math>~(3-\nu) \dot{a} </math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\frac{a}{\tilde\rho} \frac{\partial \tilde\rho}{\partial t}
+ \tilde{\nabla}\cdot \biggl[  \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
+ \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \frac{\tilde{\nabla} \tilde\rho}{\tilde\rho}
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\frac{a}{\tilde\rho} \frac{\partial \tilde\rho}{\partial t}
+ \tilde{\nabla}\cdot \vec{v}
- \tilde{\nabla}\cdot \biggl[  \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
+ \biggl[ \vec{v}
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \frac{\tilde{\nabla} \tilde\rho}{\tilde\rho}
</math>
  </td>
</tr>
<tr>
  <td align="right">
<math>~\Rightarrow ~~~ (3-\nu) \dot{a}
+ \tilde{\nabla}\cdot \biggl[  \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr]
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\frac{1}{a^2 \rho} \frac{\partial (a^3\rho)}{\partial t}
+ \tilde{\nabla}\cdot \vec{v}
+ \biggl[ \vec{v}
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \frac{\tilde{\nabla} \rho}{\rho}
</math>
  </td>
</tr>
<tr>
  <td align="right">
&nbsp;
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>~\frac{a}{\rho} \frac{\partial \rho}{\partial t} + 3\dot{a}
+ \tilde{\nabla}\cdot \vec{v}
+ \biggl[ \vec{v}
- \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \frac{\tilde{\nabla} \rho}{\rho}
</math>
  </td>
</tr>
<tr>
  <td align="right">
<math>~\Rightarrow ~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t}
+ a^{-1}\tilde{\nabla}\cdot \vec{v}
+ \biggl[ \vec{v}
- \dot{a} \biggl( \frac{\vec{r}}{a}\biggr) \biggr] \cdot \frac{a^{-1}\tilde{\nabla} \rho}{\rho}
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\frac{\dot{a}}{a} \biggl[\tilde{\nabla}\cdot \biggl( \frac{\vec{r}}{a} \biggr) -\nu \biggr]
</math>
  </td>
</tr>
<tr>
  <td align="right">
<math>~\Rightarrow ~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t}
+ a^{-1}\tilde{\nabla}\cdot \vec{v}
+ a^{-1} \biggl[ \vec{v}
- \dot{a} \vec{\mathfrak{x}} \biggr] \cdot \frac{\tilde{\nabla} \rho}{\rho}
</math>
  </td>
  <td align="center">
<math>~=</math>
  </td>
  <td align="left">
<math>
\frac{\dot{a}}{a} \biggl[\tilde{\nabla}\cdot \vec{\mathfrak{x}} -\nu \biggr]
</math>
  </td>
</tr>
</table>
</div>


</td></tr>
</td></tr>
</table>
</table>
</div>
-->


=Related Discussions=
=Related Discussions=
* Homologous collapse deduced from an analysis of the [[User:Tohline/SSC/Stability/n3PolytropeLAWE#Specific_case_of_n_.3D_3_Polytropes|LAWE that governs low-amplitude, homentropic radial oscillations in n = 3 polytropes]].




{{LSU_HBook_footer}}
{{LSU_HBook_footer}}

Latest revision as of 01:48, 8 March 2017

Homologously Collapsing Stellar Cores

Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

Review of Goldreich and Weber (1980)

This is principally a review of the dynamical model that Peter Goldreich & Stephen Weber (1980, ApJ, 238, 991) developed to describe the near-homologous collapse of stellar cores. As we began to study the Goldreich & Weber paper, it wasn't immediately obvious how the set of differential governing equations should be modified in order to accommodate a radially contracting (accelerating) coordinate system. I did not understand the transformed set of equations presented by Goldreich & Weber as equations (7) and (8), for example. At first, I turned to Poludnenko & Khokhlov (2007, Journal of Computational Physics, 220, 678) — hereafter, PK07 — for guidance. PK07 develop a very general set of governing equations that allows for coordinate rotation as well as expansion or contraction. Ultimately, the most helpful additional reference proved to be §19.11 (pp. 187 - 190) of Kippenhahn & Weigert [ KW94 ].

Governing Equations

Goldreich & Weber begin with the identical set of principal governing equations that serves as the foundation for all of the discussions throughout this H_Book. In particular, as is documented by their equation (1), their adopted equation of state is adiabatic/polytropic,

<math>~P = \kappa \rho^\gamma \, ,</math>

— where both <math>~\kappa</math> and <math>~\gamma</math> are constants — and therefore satisfies what we have referred to as the

Adiabatic Form of the
First Law of Thermodynamics

(Specific Entropy Conservation)

<math>~\frac{d\epsilon}{dt} + P \frac{d}{dt} \biggl(\frac{1}{\rho}\biggr) = 0</math> .

their equation (3) is what we have referred to as the

Euler Equation
in terms of the Vorticity,

<math>~\frac{\partial\vec{v}}{\partial t} + \vec\zeta \times \vec{v}= - \frac{1}{\rho} \nabla P - \nabla \biggl[\Phi + \frac{1}{2}v^2 \biggr] </math>

where, <math>~\vec\zeta \equiv \nabla\times \vec{v}</math> is the fluid vorticity; their equation (4) is the

Poisson Equation

LSU Key.png

<math>\nabla^2 \Phi = 4\pi G \rho</math>

and their equation (2) is what we have referred to as the

Eulerian Representation
or
Conservative Form
of the Continuity Equation,

<math>~\frac{\partial\rho}{\partial t} + \nabla \cdot (\rho \vec{v}) = 0</math>

although, for the derivation, below, we prefer to start with what we have referred to as the

Standard Lagrangian Representation
of the Continuity Equation,

LSU Key.png

<math>\frac{d\rho}{dt} + \rho \nabla \cdot \vec{v} = 0</math>

Tweaking the set of principal governing equations, as we have written them, to even more precisely match equations (1) - (4) in Goldreich & Weber (1980), we should replace the state variable <math>~P</math> (pressure) with <math>~H</math> (enthalpy), keeping in mind that, <math>~\gamma = 1 + 1/n</math>, and, as presented in our introductory discussion of barotropic supplemental relations,

<math>~H = \biggl( \frac{\gamma}{\gamma-1} \biggr) \kappa \rho^{\gamma-1} \, ,</math>

and,

<math>~\nabla H = \frac{\nabla P}{\rho} \, .</math>

Imposed Constraints

Goldreich & Weber (1980) specifically choose to examine the spherically symmetric collapse of a <math>~\gamma = 4/3</math> fluid. With this choice of adiabatic index, the equation of state becomes,

<math>~H = 4 \kappa \rho^{1/3} \, .</math>

And because a strictly radial flow-field exhibits no vorticity (i.e., <math>\vec\zeta = 0</math>), the Euler equation can be rewritten as,

<math>~\frac{\partial v_r}{\partial t} </math>

<math>~=</math>

<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}v_r^2 \biggr] \, .</math>

Goldreich & Weber also realize that, because the flow is vorticity free, the velocity can be obtained from a stream function, <math>~\psi</math>, via the relation,

<math>~\vec{v} = \nabla\psi ~~~~~\Rightarrow~~~~~v_r = \nabla_r\psi </math>         and         <math>~\nabla\cdot \vec{v} = \nabla_r^2 \psi \, .</math>

Hence, the continuity equation becomes,

<math>~\frac{1}{\rho} \frac{d\rho}{dt}</math>

<math>~=</math>

<math>~-~ \nabla_r^2 \psi \, ,</math>

and the Euler equation becomes,

<math>~\frac{\partial }{\partial t} \biggl[ \nabla_r \psi \biggr]</math>

<math>~=</math>

<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}(\nabla_r \psi)^2 \biggr] \, .</math>

Since we are, up to this point in the discussion, still referencing the inertial-frame radial coordinate, the <math>~\nabla_r</math> operator can be moved outside of the partial time-derivative on the lefthand side of this equation to give,

<math>~\nabla_r \biggl[ \frac{\partial \psi}{\partial t} + H + \Phi + \frac{1}{2}(\nabla_r \psi)^2 \biggr]</math>

<math>~=</math>

<math>~0 \, .</math>

This means that the terms inside the square brackets must sum to a constant that is independent of spatial position. Following the lead of Goldreich & Weber, this "integration constant" will be incorporated into the potential, in which case we have,

<math>~\frac{\partial \psi}{\partial t} </math>

<math>~=</math>

<math>~-~ \biggl[ H + \Phi + \frac{1}{2} ( \nabla_r \psi )^2 \biggr] \, ,</math>

which matches equation (5) of Goldreich & Weber (1980).

Now, because it is more readily integrable, we ultimately would like to work with a differential equation that contains the total, rather than partial, time derivative of <math>~\psi</math>. So we will take this opportunity to shift from an Eulerian representation of the Euler equation to a Lagrangian representation, invoking the same (familiar to fluid dynamicists) operator transformation as we have used in our general discussion of the Euler equation, namely,

<math>~\frac{\partial\psi}{\partial t} ~~ \rightarrow ~~ \frac{d\psi}{dt} - \vec{v}\cdot \nabla\psi \, .</math>

In the context of Goldreich & Weber's model, we are dealing with a one-dimension (spherically symmetric), radial flow, so,

<math>\vec{v}\cdot \nabla\psi = v_r \nabla_r \psi \, .</math>

But, given that we have adopted a stream-function representation of the flow in which <math>~v_r = \nabla_r\psi</math>, we appreciate that this term can either be written as <math>~v_r^2</math> or <math>~(\nabla_r\psi)^2</math>. We choose the latter representation, so the Euler equation becomes,

<math>~\frac{d\psi}{dt} - (\nabla_r\psi)^2</math>

<math>~=</math>

<math>~-~ \biggl[ H + \Phi + \frac{1}{2} ( \nabla_r \psi )^2 \biggr] \, ,</math>

or, combining like terms on the left and right,

<math>~\frac{d\psi}{dt} </math>

<math>~=</math>

<math>~\frac{1}{2} ( \nabla_r \psi )^2 - H - \Phi \, .</math>

Dimensionless and Time-Dependent Normalization

Length

In their investigation, Goldreich & Weber (1980) chose the same length scale for normalization that is used in deriving the Lane-Emden equation, which governs the hydrostatic structure of a polytrope of index <math>~n</math>, that is,

<math> a_\mathrm{n} \equiv \biggl[\frac{1}{4\pi G}~ \biggl( \frac{H_c}{\rho_c} \biggr)\biggr]^{1/2} \, , </math>

where the subscript, "c", denotes central values. In this case <math>~(n = 3)</math>, substitution of the equation of state expression for <math>~H_c</math> leads to,

<math> a = \rho_c^{-1/3} \biggl(\frac{\kappa}{\pi G}\biggr)^{1/2} \, . </math>

Most significantly, Goldreich & Weber (see their equation 6) allow the normalizing scale length to vary with time in order for the governing equations to accommodate a self-similar dynamical solution. In doing this, they effectively adopted an accelerating coordinate system with a time-dependent dimensionless radial coordinate,

<math>~\vec\mathfrak{x} \equiv \frac{1}{a(t)} \vec{r} \, .</math>

This, in turn, will mean that either the central density varies with time, or the specific entropy of all fluid elements (captured by the value of <math>~\kappa</math>) varies with time, or both. In practice, Goldreich & Weber assume that <math>~\kappa</math> is held fixed, so the time-variation in the scale length, <math>~a</math>, reflects a time-varying central density; specifically,

<math> \rho_c = \biggl(\frac{\kappa}{\pi G}\biggr)^{3/2} [a(t)]^{-3} \, . </math>

Given the newly adopted dimensionless radial coordinate, the following replacements for the spatial operators should be made, as appropriate, throughout the set of governing equations:

<math>~\nabla_r ~\rightarrow~ a^{-1} \nabla_\mathfrak{x}</math>        and        <math>~\nabla_r^2 ~\rightarrow~ a^{-2} \nabla_\mathfrak{x}^2 \, .</math>

Specifically, the continuity equation, the Euler equation, and the Poisson equation become, respectively,

<math>~\frac{1}{\rho} \frac{d\rho}{dt} </math>

<math>~=</math>

<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi \, ;</math>

<math>~\frac{d\psi}{dt} </math>

<math>~=</math>

<math>~\frac{1}{2} a^{-2} ( \nabla_\mathfrak{x} \psi )^2 - H - \Phi \, ;</math>

<math>~a^{-2}\nabla_\mathfrak{x}^2 \Phi </math>

<math>~=</math>

<math>~4\pi G \rho \, .</math>

Reconciling with Goldreich & Weber

The set of three principal governing equations, as just derived, are intended to match equations (7) - (9) of Goldreich & Weber (1980). The following is a framed image of equations (7) - (9) as they appear in the Goldreich & Weber publication:

Principal Governing Equations from Goldreich & Weber (1980)

Goldreich & Weber (1980)

For discussion purposes, next we will retype this set of equations, altering only the variable names and notation to correspond with ours. Assuming that we have interpreted their typeset expressions correctly, the governing equations, as derived by Goldreich & Weber, are,

<math>~\frac{1}{\rho} \frac{\partial\rho}{\partial t} ~+ a^{-1}(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot \frac{\nabla_\mathfrak{x}\rho}{\rho}+~ a^{-2} \nabla_\mathfrak{x}^2 \psi </math>

<math>~=</math>

<math>0 \, ;</math>

<math>~\frac{\partial\psi}{\partial t} - \frac{\dot{a} \mathfrak{x}}{a} \cdot \nabla_\mathfrak{x} \psi~+ \frac{1}{2} a^{-2}( \nabla_\mathfrak{x} \psi )^2 + H + \Phi </math>

<math>~=</math>

<math>0 \, ;</math>

<math>~a^{-2}\nabla_\mathfrak{x}^2 \Phi - 4\pi G \rho</math>

<math>~=</math>

<math>~0 \, .</math>

Notice that our expression for the Poisson equation matches the expression presented by Goldreich & Weber, but it isn't immediately obvious whether or not the other two pairs of equations match. Let's rearrange the terms in Goldreich & Weber's continuity equation and in their Euler equation to emphasize overlap with ours:

<math>~\frac{1}{\rho} \biggl[ \frac{\partial\rho}{\partial t} + (a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x}\rho \biggr] </math>

<math>~=</math>

<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi \, ;</math>

<math>~\frac{\partial\psi}{\partial t} +(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x}\psi</math>

<math>~=</math>

<math>\frac{1}{2} a^{-2}( \nabla_\mathfrak{x} \psi )^2 - H - \Phi \, . </math>

Written in this way, the righthand-sides of Goldreich & Weber's continuity equation and Euler equation match the righthand-sides of our derived versions of these two equations. But, in both cases, the lefthand-sides do not match for two reasons:

  • Goldreich & Weber express the time-variation of the principal physical variable (either <math>~\rho</math> or <math>~\psi</math>) as a partial derivative — traditionally denoting an Eulerian perspective of the flow — while we have chosen to express the time-variation of both variables as a total derivative — to denote a Lagrangian perspective of the flow;
  • Goldreich & Weber include a term in which the principal physical variable (either <math>~\rho</math> or <math>~\psi</math>) is being acted upon by the operator,

<math>(a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x})\cdot a^{-1}\nabla_\mathfrak{x} </math>

In order to reconcile these differences, we remember, first, the operator transformation (familiar to fluid dynamicists) used previously,

<math>~\frac{d}{dt} ~~ \rightarrow ~~ \frac{\partial}{\partial t} + \vec{v}_T\cdot \nabla </math>

where we have added a subscript <math>~T</math> to the velocity in order to emphasize that, in this context, <math>~\vec{v}</math> is a "transport" velocity measuring the fluid velocity relative to the adopted coordinate frame. Now, the radial velocity of the fluid (as measured in the inertial frame) is derivable from the stream function via the expression,

<math>v_r = \nabla_r\psi = a^{-1} \nabla_\mathfrak{x}\psi \, ;</math>

while the radial velocity of the coordinate frame that has been adopted by Goldreich & Weber is <math>~\dot{a}\mathfrak{x}</math>. Hence, as measured in the radially collapsing coordinate frame, the magnitude of the (radially directed) transport velocity is,

<math>|\vec{v}_T| = (a^{-1}\nabla_\mathfrak{x}\psi - \dot{a}\mathfrak{x}) \, .</math>

It is therefore clear that the lefthand-sides of the continuity and Euler equations, as presented by Goldreich & Weber, are simply the operator,

<math>~ \frac{\partial}{\partial t} + |\vec{v}_T| a^{-1} \nabla_\mathfrak{x} </math>

acting on <math>~\rho</math> and <math>~\psi</math>, respectively. The lefthand sides of these equations do, therefore, represent exactly the same physics as the lefthand sides of the equations we have derived.


Finally, it should be appreciated that, if the evolutionary flow throughout the collapsing configuration is simple enough that a single scalar function, <math>a(t)</math>, suffices to track the location of all fluid elements simultaneously, then <math>~|\vec{v}_T|</math> will be zero everywhere and at all times. And the time-variation of the primary variables as deduced from Goldriech & Weber's Eulerian perspective will be identical to the time-variation of the primary variables as deduced from our Lagrangian perspective. This is precisely the outcome achieved via the similarity solution discovered by Goldreich & Weber.

Mass-Density and Speed

Next, Goldreich & Weber (1980) (see their equation 10) choose to normalize the density by the central density, specifically defining a dimensionless function,

<math>f \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} \, ,</math>

which, in order to successfully identify a similarity solution, may be a function of space but not of time. Keeping in mind that <math>~n = 3</math>, this is also in line with the formulation and evaluation of the Lane-Emden equation, where the primary dependent structural variable is the dimensionless polytropic enthalpy,

<math>\Theta_H \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/n} \, .</math>

Also, Goldreich & Weber (1980) (see their equation 11) normalize the gravitational potential to the square of the central sound speed,

<math>c_s^2 = \frac{\gamma P_c}{\rho_c} = \frac{4}{3} \kappa \rho_c^{1/3} = \frac{4}{3}\biggl(\frac{\kappa^3}{\pi G}\biggr)^{1/2} [a(t)]^{-1} \, .</math>

Specifically, their dimensionless gravitational potential is,

<math>~\sigma</math>

<math>~\equiv</math>

<math>~\frac{\Phi}{c_s^2} = \biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \Phi \, ,</math>

and the similarly normalized enthalpy may be written as,

<math>~\frac{H}{c_s^2} </math>

<math>~=</math>

<math>~\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] 4\kappa \rho^{1/3} </math>

 

<math>~=</math>

<math>~3 \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} </math>

 

<math>~=</math>

<math>~3f \, .</math>

With these additional scalings, our continuity equation becomes,

<math>~\cancelto{0}{\frac{d\ln f^3}{dt}} + \frac{d\ln \rho_c}{dt}</math>

<math>~=</math>

<math>~-~ a^{-2} \nabla_\mathfrak{x}^2 \psi \, ,</math>

where the first term on the lefthand side has been set to zero because, as stated above, <math>~f</math> may be a function of space but not of time; our Euler equation becomes,

<math>~ \biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \biggl[ \frac{d\psi}{dt} - \frac{1}{2a^2} ( \nabla_\mathfrak{x} \psi )^2 \biggr] </math>

<math>~=</math>

<math>~ - 3 f - \sigma \, ;</math>

and the Poisson equation becomes,

<math>\nabla_\mathfrak{x}^2 \sigma = 3f^3 \, .</math>

Homologous Solution

Goldreich & Weber (1980) discovered that the governing equations admit to an homologous, self-similar solution if they adopted a stream function of the form,

<math>~\psi</math>

<math>~=</math>

<math>~\frac{1}{2}a \dot{a} \mathfrak{x}^2 \, ,</math>

which, when acted upon by the various relevant operators, gives,

<math>~\nabla_\mathfrak{x}\psi</math>

<math>~=</math>

<math>~a \dot{a} \mathfrak{x} \, ,</math>

<math>~\nabla^2_\mathfrak{x}\psi</math>

<math>~=</math>

<math>~ \biggl( \frac{1}{2}a \dot{a} \biggr) \frac{1}{\mathfrak{x}^2} \frac{d}{d\mathfrak{x}} \biggl[\mathfrak{x}^2 \frac{d}{d\mathfrak{x}} \mathfrak{x}^2 \biggr] = 3 a \dot{a} \, , </math>

<math>~\frac{d\psi}{dt}</math>

<math>~=</math>

<math>~\mathfrak{x}^2 \biggl[ \frac{1}{2}\dot{a}^2 + \frac{1}{2}a\ddot{a} \biggr] \, .</math>

Hence, the radial velocity profile is,

<math>~v_r = a^{-1}\nabla_\mathfrak{x} \psi</math>

<math>~=</math>

<math>~\dot{a}\mathfrak{x} \, , </math>

which, as foreshadowed above, exactly matches the radial velocity of the collapsing coordinate frame; the continuity equation gives,

<math>~\frac{d\ln \rho_c}{dt} </math>

<math>~=</math>

<math>-~ \frac{3\dot{a}}{a} </math>

<math>\Rightarrow~~~~\frac{d\ln \rho_c}{dt} + \frac{d\ln a^3}{dt} </math>

<math>~=</math>

<math>~0 \, ,</math>

which means that, consistent with the expected relationship between the central density and the time-varying length scale established above, the product, <math>~a^3 \rho_c</math>, is independent of time; and the Euler equation becomes,

<math>~ - 3 f - \sigma </math>

<math>~=</math>

<math>~ \biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \biggl\{ \mathfrak{x}^2 \biggl[ \frac{1}{2}\dot{a}^2 + \frac{1}{2}a\ddot{a} \biggr] - \frac{1}{2} ( \dot{a} \mathfrak{x} )^2 \biggr\} </math>

 

<math>~=</math>

<math>~ \frac{3}{8} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} (a \mathfrak{x})^2 \ddot{a} </math>

<math>~\Rightarrow~~~~ \frac{(f + \sigma/3)}{\mathfrak{x}^2} </math>

<math>~=</math>

<math>~ - \frac{1}{8} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a^2 \ddot{a} \, . </math>

This matches equation (12) of Goldreich & Weber (1980).

Because everything on the lefthand side of this scaled Euler equation depends only on the dimensionless spatial coordinate, <math>~\mathfrak{x}</math>, while everything on the righthand side depends only on time — via the parameter, <math>~a(t)</math> — both expressions must equal the same (dimensionless) constant. Goldreich & Weber (1980) (see their equation 12) call this constant, <math>~\lambda/6</math>. From the terms on the lefthand side, they conclude (see their equation 13) that the dimensionless gravitational potential is,

<math>~\sigma</math>

<math>~=</math>

<math>~\frac{1}{2} \lambda ~\mathfrak{x}^2 - 3f \, .</math>

From the terms on the righthand side they conclude, furthermore, that the nonlinear differential equation governing the time-dependent variation of the scale length, <math>~a</math>, is,

<math>~ a^2 \ddot{a} </math>

<math>~=</math>

<math>~-~\frac{4\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, .</math>



Work-in-progress.png

Material that appears after this point in our presentation is under development and therefore
may contain incorrect mathematical equations and/or physical misinterpretations.
|   Go Home   |


As Goldreich & Weber (1980) point out, this nonlinear differential equation can be integrated twice to produce an algebraic relationship between <math>~a</math> and time, <math>~t</math>. The required mathematical steps are identical to the steps used to analytically solve the classic, spherically symmetric free-fall collapse problem. First, rewrite the equation as,

<math>~ \frac{d \dot{a} }{dt} </math>

<math>~=</math>

<math>~-\frac{B}{2a^2} \, , </math>

where,

<math> ~B \equiv \frac{8\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, , </math>

has the same dimensions as the product, <math>~GM</math> (see the free-fall collapse problem), that is, the dimensions of "length-cubed per unit time-squared." Then, multiply both sides by <math>~2\dot{a} = 2(da/dt)</math> to obtain,

<math>~ 2\dot{a} \frac{d\dot{a}}{dt} </math>

<math>~=</math>

<math>~-B \biggl( a^{-2} \frac{da}{dt} \biggr) </math>

<math>~\Rightarrow~~~~ \frac{d\dot{a}^2}{dt} </math>

<math>~=</math>

<math>~B \frac{d}{dt} \biggl( \frac{1}{a} \biggr) \, ,</math>

which integrates once to give,

<math> ~\dot{a}^2 = \frac{B}{a} + C \, , </math>

or,

<math> ~dt = \biggl( \frac{B}{a} + C \biggr)^{-1/2} da \, . </math>

For the case, <math>~C = 0</math>, this differential equation can be integrated straightforwardly to give (see Goldreich & Weber's equation 15),

For the cases when <math>~C \ne 0</math>, Wolfram Mathematica's online integrator can be called upon to integrate this equation and provide the following closed-form solution,

<math>~t</math>

<math>~=</math>

<math> \frac{a}{C} \biggl( \frac{B}{a} + C \biggr)^{1/2} - \frac{B}{2C^{3/2}} \ln \biggl[2aC^{1/2} \biggl( \frac{B}{a} + C \biggr)^{1/2} + B + 2aC \biggr] \, . </math>



As Goldreich & Weber (1980) point out, because all terms in this equation are inside the gradient operator, the sum of the terms inside the square brackets must equal a constant — that is, the sum must be independent of spatial position throughout the spherically symmetric configuration. If, following Goldreich & Weber's lead, we simply fold this integration constant into the potential, the Euler equation becomes (see their equation 8),

<math>~\frac{\partial \psi}{\partial t} - \biggl( \frac{\dot{a}}{a} \biggr)\psi + H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi \biggr)^2 </math>

<math>~=</math>

<math>~0 \, .</math>

<math>~\frac{\partial \rho}{\partial t} + \rho \nabla_r \cdot \vec{v} + \vec{v}\cdot \nabla_r \rho</math>

<math>~=</math>

<math>~0</math>

<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + \nabla_r \cdot \vec{v} + \vec{v}\cdot \frac{\nabla_r \rho}{\rho}</math>

<math>~=</math>

<math>~0</math>

<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1} \nabla_x \cdot \biggl[ a^{-1} \nabla_x \psi \biggr] + a^{-1} \nabla_x \psi \cdot \frac{a^{-1}\nabla_x \rho}{\rho}</math>

<math>~=</math>

<math>~0</math>

<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}

+ a^{-2} \nabla_x^2\psi </math>

<math>~=</math>

<math>~0</math>

Goldreich & Weber's (1980) Governing Equations After Initial Length Scaling (yet to be demonstrated)

<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}

+ a^{-2} \nabla_x^2\psi </math>

<math>~=</math>

<math>~0</math>

<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2 + H + \Phi</math>

<math>~=</math>

<math>~0</math>

<math>~ a^{-2} \nabla_x^2\Phi - 4\pi G \rho </math>

<math>~=</math>

<math>~0</math>

where,

<math>~\vec{x} \equiv \frac{\vec{r}}{a} \, ,</math>

and it is understood that derivatives in the <math>~\nabla_x</math> and <math>~\nabla_x^2</math> operators are taken with respect to the dimensionless radial coordinate, <math>~x</math>.


Related Discussions


Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation