Difference between revisions of "User:Tohline/Appendix/Ramblings/PatrickMotl"

From VistrailsWiki
Jump to navigation Jump to search
Line 56: Line 56:
===Instability Toward Convection===
===Instability Toward Convection===


In my chapter titled, "[[User:Tohline/2DStructure/AxisymmetricInstabilities#Axisymmetric_Instabilities_to_Avoid|Axisymmetric Instabilities to Avoid]]," I discuss — among other things — the ''Schwarzschild Criterion.''  Toward the very end of this chapter, in a subsection titled, ''[[User:Tohline/2DStructure/AxisymmetricInstabilities#Modeling_Implications_and_Advice|Modeling Implications and Advice]],'' I specifically describe how convection might arise when modeling spherical polytropic configurations.  Would you please read this short subsection and let me know whether you agree with my explanation or not?
In my chapter titled, "[[User:Tohline/2DStructure/AxisymmetricInstabilities#Axisymmetric_Instabilities_to_Avoid|Axisymmetric Instabilities to Avoid]]," I discuss — among other things — the ''Schwarzschild Criterion.''  Toward the very end of that chapter, in a subsection titled, ''[[User:Tohline/2DStructure/AxisymmetricInstabilities#Modeling_Implications_and_Advice|Modeling Implications and Advice]],'' I specifically describe how convection might arise when modeling spherical polytropic configurations.  Would you please read this short subsection and let me know whether you agree with my explanation or not?
 
In the context of this discussion of the Schwarzschild criterion (i.e., convective instabilities) in polytropes, my question to you is:  ''What value of the adiabatic index, <math>~\gamma</math>, did you use when you evolved the bipolytrope?''  Did you use the same index for the entire configuration, or did you use a value in the envelope that is different from the value used in the core?
 
If you used <math>~\gamma = 6/5</math> for the core, then the core should have uniform specific entropy and therefore would be (only) marginally stable against convection.  Likewise, if you used <math>~\gamma = 2</math> for the envelope, it should be (only) marginally stable against convection.  Incidentally, these <b>are</b> the two separate values of the adiabatic index that I used when I used a free-energy analysis to examine stability.
 
NOTE:  In yet [[User:Tohline/SSC/Stability/MurphyFiedler85#Review_of_the_BiPolytrope_Stability_Analysis_by_Murphy_.26_Fiedler_.281985b.29|another chapter of my book]], I discuss the bipolytropic stability analysis that was performed by Murphy &amp; Fiedler (1985b).  They examined the stability of bipolytropes having the core/envelope polytropic indexes swapped, that is, their equilibrium models had, <math>~(n_c, n_e) = (1, 5)</math>.  Their stability analysis was performed while assuming that the adiabatic index was <math>~\gamma = 5/3</math> ''throughout the entire configuration.''  In a short subsection near the beginning of my chapter titled, "[[User:Tohline/SSC/Stability/MurphyFiedler85#Aside_Regarding_Convectively_Unstable_Core|Aside Regarding Convectively Unstable Core]]," I have pointed out that the cores of these models should have all been convectively unstable, according to the Schwarzschild criterion.  Please read this short subsection and let me know if you agree with my stated expectation for those models.


=Related Discussions=
=Related Discussions=

Revision as of 22:14, 4 May 2019

Discussing Patrick Motl's 2019 Simulations

Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

May 1 (from Patrick)

Hi Joel,

I hope things are well for you and yours.

I did finally have a couple research students this semester that were able to slog their way into unix, programming, etc. far enough to do some useful things.

They ran two spherical bipolytropes with my old cylindrical code. These were n = 5 cores with n = 1 envelopes. No density discontinuity. One model is a little below the stability boundary in xi, the other is a little above the stability boundary.

What I can see from the evolutions, especially now that I made plots of the entropy, is that they are convectively unstable and that is just a mess with the core convecting into the envelope.

Did you happen to have any thoughts on what might be a better case to run? When I get done grading finals I am going to work through the equations with kappa set explicitly in the envelope so the entropy profile is flat and just live with whatever density discontinuity that gives me.

cheers, Patrick

May 4 (my response)

Patrick,

My initial response to your 1 May email follows. In an effort to make sure we are on the same page when referencing the structural properties and the stability properties of various configurations, my response includes links to various chapters/subsections of my online wiki-based book.

Thanks for pursuing this problem. I am still very interested in Its solution.

All the best, Joel

Chosen Initial Models

I presume that when you constructed your pair of initial (spherical) models, you used the analytically prescribed properties found in my chapter titled, "BiPolytrope with <math>n_c = 5</math> and <math>n_e=1</math>" and that when you reference the "stability boundary in <math>~\xi</math>" you are drawing from the summary (Table 3 and Figure 3) found near the end of this chapter in the subsection titled, "Stability Condition." In particular, based on the information contained in this chapter, I presume that you are assuming that the marginally unstable model along the <math>~\mu_e/\mu_c = 1</math> sequence is the configuration having the properties …

<math>~(\xi_i, q, \nu) = (2.416, 0.5952, 0.6830) \, ,</math>

and that your pair of initial models have values of <math>~\xi_i</math> that are somewhat greater than and somewhat smaller than 2.416. If this does not properly describe your choice of initial models, please clarify.

Instability Toward Convection

In my chapter titled, "Axisymmetric Instabilities to Avoid," I discuss — among other things — the Schwarzschild Criterion. Toward the very end of that chapter, in a subsection titled, Modeling Implications and Advice, I specifically describe how convection might arise when modeling spherical polytropic configurations. Would you please read this short subsection and let me know whether you agree with my explanation or not?

In the context of this discussion of the Schwarzschild criterion (i.e., convective instabilities) in polytropes, my question to you is: What value of the adiabatic index, <math>~\gamma</math>, did you use when you evolved the bipolytrope? Did you use the same index for the entire configuration, or did you use a value in the envelope that is different from the value used in the core?

If you used <math>~\gamma = 6/5</math> for the core, then the core should have uniform specific entropy and therefore would be (only) marginally stable against convection. Likewise, if you used <math>~\gamma = 2</math> for the envelope, it should be (only) marginally stable against convection. Incidentally, these are the two separate values of the adiabatic index that I used when I used a free-energy analysis to examine stability.

NOTE: In yet another chapter of my book, I discuss the bipolytropic stability analysis that was performed by Murphy & Fiedler (1985b). They examined the stability of bipolytropes having the core/envelope polytropic indexes swapped, that is, their equilibrium models had, <math>~(n_c, n_e) = (1, 5)</math>. Their stability analysis was performed while assuming that the adiabatic index was <math>~\gamma = 5/3</math> throughout the entire configuration. In a short subsection near the beginning of my chapter titled, "Aside Regarding Convectively Unstable Core," I have pointed out that the cores of these models should have all been convectively unstable, according to the Schwarzschild criterion. Please read this short subsection and let me know if you agree with my stated expectation for those models.

Related Discussions

Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation