User:Tohline/SSC/Structure/LimitingMasses
From VisTrailsWiki
(→Mass Upper Limits: add to and modify discussion) 
(→Bounded Isothermal Sphere & BonnorEbert Mass: Construct table of alpha coefficient) 

Line 20:  Line 20:  
==Bounded Isothermal Sphere & BonnorEbert Mass==  ==Bounded Isothermal Sphere & BonnorEbert Mass==  
  In the mid1950s, [http://adsabs.harvard.edu/abs/1955ZA.....37..217E Ebert] (1955) and [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by simply chopping off the isothermal sphere at some finite radius and imposing an externally applied pressure, <math>P_e</math>, that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of <math>P_e</math> below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, for a given temperature and <math>P_e</math>, a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value, <math>M_\mathrm{BE}</math>. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries.  +  In the mid1950s, [http://adsabs.harvard.edu/abs/1955ZA.....37..217E Ebert] (1955) and [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by simply chopping off the isothermal sphere at some finite radius and imposing an externally applied pressure, <math>P_e</math>, that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of <math>P_e</math> below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, for a given temperature and <math>P_e</math>, a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value, 
+  <div align="center">  
+  <table border="0" cellpadding="5" width="95%">  
+  <tr>  
+  <td align="center">  
+  <math>M_\mathrm{max} = \alpha \biggl( \frac{\bar{c_s}^8}{G^3 P_e} \biggr)^{1/2}</math>  
+  </td>  
+  <td align="center">  
+  
+  <! Begin inset table>  
+  <table border="1" cellpadding="5">  
+  <tr>  
+  <th align="center" colspan="3">  
+  Coefficient <math>\alpha</math> for PressureBounded Configurations  
+  </th>  
+  </tr>  
+  <tr>  
+  <th align="center">  
+  <font size="+1">  
+  <math>\alpha</math>  
+  </font>  
+  </th>  
+  <th align="center">  
+  Context  
+  </th>  
+  <th align="center">  
+  Source  
+  </th>  
+  </tr>  
+  
+  <tr>  
+  <td align="center">  
+  <math>~ 0.89</math>  
+  </td>  
+  <td align="center">  
+  <font size="2">  
+  Bounded Isothermal Sphere  
+  </font>  
+  <br>  
+  <font size="2">  
+  (numerically derived)  
+  </font>  
+  </td>  
+  <td align="center">  
+  [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956)  
+  <br>  
+  <font size="2">Discovery Paper</font>  
+  </td>  
+  </tr>  
+  
+  <tr>  
+  <td align="center">  
+  <math>\biggl( \frac{3^4\cdot 5^3}{2^{10}\pi} \biggr)^{1/2}</math>  
+  </td>  
+  <td align="center">  
+  <font size="2">  
+  Isothermal Virial Analysis  
+  </font>  
+  <br>  
+  <font size="2">  
+  (exact)  
+  </font>  
+  </td>  
+  <td align="center">  
+  [[User:Tohline/SphericallySymmetricConfigurations/Virial#Bounded_IsothermalHere]]  
+  </td>  
+  </tr>  
+  
+  <tr>  
+  <td align="center">  
+  <math>\biggl( \frac{3^{19}}{2^{12}\cdot 5^9\pi} \biggr)^{1/2}</math>  
+  </td>  
+  <td align="center">  
+  <font size="2">  
+  <math>n=5</math> Virial Analysis  
+  </font>  
+  <br>  
+  <font size="2">  
+  (exact)  
+  </font>  
+  </td>  
+  <td align="center">  
+  [[User:Tohline/SphericallySymmetricConfigurations/Virial#Bounded_AdiabaticHere]]  
+  </td>  
+  </tr>  
+  
+  <tr>  
+  <td align="center">  
+  <math>\biggl( \frac{1}{2} \biggr)^{3/10}\biggl( \frac{3^{7}}{2^{8}\pi} \biggr)^{1/2}</math>  
+  </td>  
+  <td align="center">  
+  <font size="2">  
+  Bounded <math>n=5</math> Polytrope  
+  </font>  
+  <br>  
+  <font size="2">  
+  (exact)  
+  </font>  
+  </td>  
+  <td align="center">  
+  [[User:Tohline/SSC/Structure/PolytropesEmbedded#n_.3D_5_PolytropeHere]]  
+  </td>  
+  </tr>  
+  </table>  
+  <! End inset table>  
+  
+  </td>  
+  </tr>  
+  </table>  
+  </div>  
+  
+  
+  
+  <math>M_\mathrm{BE}</math>. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries.  
==SchöbergChandrasekhar Mass==  ==SchöbergChandrasekhar Mass== 
Revision as of 05:20, 1 June 2013
Contents 
Mass Upper Limits
 Tiled Menu  Tables of Content  Banner Video  Tohline Home Page  
Preamble
Spherically symmetric, selfgravitating, equilibrium configurations can be constructed from gases exhibiting a wide variety of degrees of compressibility. When examining how the internal structure of such configurations varies with compressibility, or when examining the relative stability of such structures, it can be instructive to construct models using a polytropic equation of state because the degree of compressibility can be adjusted by simply changing the value of the polytropic index, , across the range, . (Alternatively, one can vary the effective adiabatic exponent of the gas, γ_{g} = 1 + 1 / n.) In particular, n = 0 () represents a hard equation of state and describes an incompressible configuration, while (γ_{g} = 1) represents an isothermal and extremely soft equation of state.
Isolated Polytropes
Isolated polytropic spheres exhibit three attributes that are especially key in the context of our present discussion:
 The equilibrium structure is dynamically stable if n < 3.
 The equilibrium structure has a finite radius if n < 5.
 The equilibrium structure can be described in terms of closedform analytic expressions for n = 0, n = 1, and n = 5.
Isothermal Spheres
Isothermal spheres (polytropes with index ) are discussed in a wide variety of astrophysical contexts because it is not uncommon for physical conditions to conspire to create an extended volume throughout which a configuration exhibits uniform temperature. But mathematical models of isothermal spheres [*] are relatively cumbersome to analyze because they extend to infinity, they are dynamically unstable, and they are not describable in terms of analytic functions. In such astrophysical contexts, we have sometimes found it advantageous to employ an n = 5 polytrope instead of an isothermal sphere. An isolated n = 5 polytrope [*] can serve as an effective surrogate for an isothermal sphere because it is infinite in extent and is dynamically unstable, but it is less cumbersome to analyze because its structure can be described by closedform analytic expressions.
Bounded Isothermal Sphere & BonnorEbert Mass
In the mid1950s, Ebert (1955) and Bonnor (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by simply chopping off the isothermal sphere at some finite radius and imposing an externally applied pressure, P_{e}, that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of P_{e} below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, for a given temperature and P_{e}, a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value,


M_{BE}. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries.
SchöbergChandrasekhar Mass
In the early 1940s, Schönberg & Chandrasekhar (1942) discovered that a star with an isothermal core will become unstable if the fractional mass of the core is above some limiting value. They discovered this by constructing models that are now commonly referred to as bipolytropes, that is, models in which the star's core is describe
Work in Progress
Virial Equilibrium
By examining the virial equilibrium of nonrotating, spherically symmetric configurations that are embedded in an external medium of pressure P_{e}, one can begin to appreciate that there is a mass above which no equilibrium exists if the effective adiabatic exponent of the gas is γ_{g} < 4 / 3. Assuming uniform density and uniform specific entropy configurations for simplicity, there is an analytic expression for this limiting mass and for the equilibrium radius of that limiting configuration. Specifically,
and,
Polytropes Embedded in an External Medium
Polytropes embedded in an external medium
Summary of Analytic Results
Example: Specify c_{s}, P_{e} and n (or η = 1 + 1 / n)  

η 
M_{max} 
R_{eq} 

α_{virial} 
α_{DHB} 
scale 
α_{virial} 
α_{DHB} 
scale 


1 

 


 

5 
6/5 




 

BonnorEbert Limiting Mass
Here we will refer to the original works of Ebert (1955, ZA, 37, 217) and Bonnor (1956, MNRAS, 116, 351) .
In his study of the "global gravitational stability [of] onedimensional polytropes," Whitworth (1981, MNRAS, 195, 967) normalizes (or "references") various derived mathematical expressions for configuration radii, R, and for the pressure exerted by an external bounding medium, P_{ex}, to quantities he refers to as, respectively, R_{rf} and P_{rf}. The paragraph from his paper in which these two reference quantities are defined is shown here:
In order to map Whitworth's terminology to ours, we note, first, that he uses M_{0} to represent the spherical configuration's total mass, which we refer to simply as M; and his parameter η is related to our via the relation,
Hence, Whitworth writes the polytropic equation of state as,
whereas, using our standard notation, this same key relation is written as,
;
and his parameter K_{η} is identical to our .
According to the second (bottom) expression identified by the red outlined box drawn above,
and inverting the expression inside the green outlined box gives,
Hence,
or, gathering all factors of P_{rf} to the lefthand side,
Analogously, according to the first (top) expression identified inside the red outlined box,
Related Wikipedia Discussions
© 2014  2021 by Joel E. Tohline 