User:Tohline/SSC/Structure/LimitingMasses
From VisTrailsWiki
(→Bounded Isothermal Sphere & BonnorEbert Mass: Improve discussion) 
(→Related Discussions) 

(21 intermediate revisions not shown)  
Line 2:  Line 2:  
=Mass Upper Limits=  =Mass Upper Limits=  
{{LSU_HBook_header}}  {{LSU_HBook_header}}  
  Spherically symmetric, selfgravitating, equilibrium configurations can be constructed from gases exhibiting a wide variety of degrees of compressibility. When examining how the internal structure of such configurations varies with compressibility, or when examining the relative stability of such structures, it can be instructive to construct models using a polytropic equation of state because the degree of compressibility can be adjusted by simply changing the value of the polytropic index, {{User:Tohline/Math/MP_PolytropicIndex}}, across the range, <math>0 \le n \le \infty</math>. (Alternatively, one can vary the effective adiabatic exponent of the gas, <math>\gamma_g = 1 + 1/n</math>.) In particular, <math>n = 0  +  Spherically symmetric, selfgravitating, equilibrium configurations can be constructed from gases exhibiting a wide variety of degrees of compressibility. When examining how the internal structure of such configurations varies with compressibility, or when examining the relative stability of such structures, it can be instructive to construct models using a polytropic equation of state because the degree of compressibility can be adjusted by simply changing the value of the polytropic index, {{User:Tohline/Math/MP_PolytropicIndex}}, across the range, <math>~0 \le n \le \infty</math>. (Alternatively, one can vary the effective adiabatic exponent of the gas, <math>~\gamma_g = 1 + 1/n</math>.) In particular, <math>~n = 0 ~~ (\gamma_g = \infty)</math> represents a ''hard'' equation of state and describes an incompressible configuration, while <math>~n = \infty ~~(\gamma_g = 1)</math> represents an isothermal and extremely ''soft'' equation of state. 
==Isolated Polytropes==  ==Isolated Polytropes==  
[[User:Tohline/SSC/Structure/Polytropes#Polytropic_SpheresIsolated polytropic spheres]] exhibit three attributes that are especially key in the context of our present discussion:  [[User:Tohline/SSC/Structure/Polytropes#Polytropic_SpheresIsolated polytropic spheres]] exhibit three attributes that are especially key in the context of our present discussion:  
<ol>  <ol>  
  <li>The equilibrium structure is dynamically stable if <math>n < 3</math>.  +  <li>The equilibrium structure is dynamically stable if <math>~n < 3</math>. 
  <li>The equilibrium structure has a finite radius if <math>n < 5</math>.  +  <li>The equilibrium structure has a finite radius if <math>~n < 5</math>. 
  <li>The equilibrium structure can be described in terms of closedform analytic expressions for [[User:Tohline/SSC/Structure/Polytropes#n_.3D_0_Polytrope<math>n = 0</math>]],  +  <li>The equilibrium structure can be described in terms of closedform analytic expressions for [[User:Tohline/SSC/Structure/Polytropes#n_.3D_0_Polytrope<math>~n = 0</math>]], 
  [[User:Tohline/SSC/Structure/Polytropes#n_.3D_1_Polytrope<math>n = 1</math>]], and  +  [[User:Tohline/SSC/Structure/Polytropes#n_.3D_1_Polytrope<math>~n = 1</math>]], and 
  [[User:Tohline/SSC/Structure/Polytropes#n_.3D_5_Polytrope<math>n = 5</math>]].  +  [[User:Tohline/SSC/Structure/Polytropes#n_.3D_5_Polytrope<math>~n = 5</math>]]. 
</ol>  </ol>  
==Isothermal Spheres==  ==Isothermal Spheres==  
  Isothermal spheres (polytropes with index <math>n=\infty</math>) are discussed in a wide variety of astrophysical contexts because it is not uncommon for physical conditions to conspire to create an extended volume throughout which a configuration exhibits uniform temperature. But [[User:Tohline/SSC/Structure/IsothermalSphere#Isothermal_Spheremathematical models of isothermal spheres]] are relatively cumbersome to analyze because they extend to infinity, they are dynamically unstable, and they are not describable in terms of analytic functions. In such astrophysical contexts, we have sometimes found it advantageous to employ an <math>n=5</math> polytrope instead of an isothermal sphere. An [[User:Tohline/SSC/Structure/Polytropes#n_.3D_5_Polytropeisolated <math>n=5</math> polytrope]] can serve as an effective surrogate for an isothermal sphere because it is infinite in extent and is dynamically unstable, but it is less cumbersome to analyze because its structure can be described by closedform analytic expressions.  +  Isothermal spheres (polytropes with index <math>~n=\infty</math>) are discussed in a wide variety of astrophysical contexts because it is not uncommon for physical conditions to conspire to create an extended volume throughout which a configuration exhibits uniform temperature. But [[User:Tohline/SSC/Structure/IsothermalSphere#Isothermal_Spheremathematical models of isothermal spheres]] are relatively cumbersome to analyze because they extend to infinity, they are dynamically unstable, and they are not describable in terms of analytic functions. In such astrophysical contexts, we have sometimes found it advantageous to employ an <math>~n=5</math> polytrope instead of an isothermal sphere. An [[User:Tohline/SSC/Structure/Polytropes#n_.3D_5_Polytropeisolated <math>~n=5</math> polytrope]] can serve as an effective surrogate for an isothermal sphere because it is infinite in extent and is dynamically unstable, but it is less cumbersome to analyze because its structure can be described by closedform analytic expressions. 
==Bounded Isothermal Sphere & BonnorEbert Mass==  ==Bounded Isothermal Sphere & BonnorEbert Mass==  
  In the mid1950s, [http://adsabs.harvard.edu/abs/1955ZA.....37..217E Ebert] (1955) and [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by chopping off the isothermal sphere at some finite radius — call it, <math>\xi_e</math> — and imposing an externally applied pressure, <math>P_e</math>, that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of <math>P_e</math> below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, given the value of <math>P_e</math> and the isothermal sound speed, <math>c_s</math>, a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value,  +  In the mid1950s, [http://adsabs.harvard.edu/abs/1955ZA.....37..217E Ebert] (1955) and [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by chopping off the isothermal sphere at some finite radius — call it, <math>~\xi_e</math> — and imposing an externally applied pressure, <math>~P_e</math>, that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of <math>~P_e</math> below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, given the value of <math>~P_e</math> and the isothermal sound speed, <math>~c_s</math>, a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value, 
<div align="center">  <div align="center">  
<table border="0" cellpadding="5" width="95%">  <table border="0" cellpadding="5" width="95%">  
Line 39:  Line 39:  
<th align="center">  <th align="center">  
<font size="+1">  <font size="+1">  
  <math>\alpha</math>  +  <math>~\alpha</math> 
</font>  </font>  
</th>  </th>  
Line 52:  Line 52:  
<tr>  <tr>  
<td align="center">  <td align="center">  
  <math>1.18</math>  +  <math>~1.18</math> 
</td>  </td>  
<td align="center">  <td align="center">  
Line 96:  Line 96:  
<td align="center">  <td align="center">  
<font size="2">  <font size="2">  
  Bounded <math>n=5</math> Polytrope  +  Bounded <math>~n=5</math> Polytrope 
</font>  </font>  
<br>  <br>  
Line 114:  Line 114:  
<td align="center">  <td align="center">  
<font size="2">  <font size="2">  
  <math>n=5</math> Virial Analysis  +  <math>~n=5</math> Virial Analysis 
</font>  </font>  
<br>  <br>  
Line 132:  Line 132:  
</table>  </table>  
</div>  </div>  
  where <math>\alpha</math> is a dimensionless coefficient of order unity. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries.  +  where <math>~\alpha</math> is a dimensionless coefficient of order unity. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries. 
  As is [[User:Tohline/SSC/Structure/BonnorEbert#Maximum_Massreviewed in a related discussion]] and as is documented in the table accompanying the expression for <math>M_\mathrm{max}</math>, above, [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) used [[User:Tohline/SSC/Structure/IsothermalSphere#Emden.27s_Numerical_SolutionEmden's (1907) tabulated properties]] of an isothermal sphere to determine that the dimensionless radius of this limiting configuration is <math>\xi_e \approx 6.5</math> and that the leading coefficient, <math>\alpha \approx 1.18</math>. It is worth noting that a [[User:Tohline/SphericallySymmetricConfigurations/Virial#BonnorEbertMassglobal virial analysis of the stability of bounded isothermal spheres]] produces the same expression for <math>M_\mathrm{max}</math> with a leading coefficient that has an exact, analytic prescription, namely, <math>\alpha = (3^4 \cdot 5^3/2^{10}\pi)^{1/2} \approx 1.77408</math>. While it can be advantageous to reference this analytic prescription of <math>\alpha</math>, the virial analysis must be considered more approximate than Bonnor's analysis because it does not require the construction of models that are in detailed force balance.  +  As is [[User:Tohline/SSC/Structure/BonnorEbert#Maximum_Massreviewed in a related discussion]] and as is documented in the table accompanying the expression for <math>~M_\mathrm{max}</math>, above, [http://adsabs.harvard.edu/abs/1956MNRAS.116..351B Bonnor] (1956) used [[User:Tohline/SSC/Structure/IsothermalSphere#Emden.27s_Numerical_SolutionEmden's (1907) tabulated properties]] of an isothermal sphere to determine that the dimensionless radius of this limiting configuration is <math>\xi_e \approx 6.5</math> and that the leading coefficient, <math>\alpha \approx 1.18</math>. It is worth noting that a [[User:Tohline/SphericallySymmetricConfigurations/Virial#BonnorEbertMassglobal virial analysis of the stability of bounded isothermal spheres]] produces the same expression for <math>~M_\mathrm{max}</math> with a leading coefficient that has an exact, analytic prescription, namely, <math>\alpha = (3^4 \cdot 5^3/2^{10}\pi)^{1/2} \approx 1.77408</math>. While it can be advantageous to reference this analytic prescription of <math>\alpha</math>, the virial analysis must be considered more approximate than Bonnor's analysis because it does not require the construction of models that are in detailed force balance. 
  Our [[User:Tohline/SSC/Structure/PolytropesEmbedded#Extension_to_Bounded_Sphere_2detailed forcebalance analysis of truncated and pressurebounded, <math>n=5</math> polytropes]] identifies a physically analogous limiting mass. If the average isothermal sound speed, <math>\bar{c_s}</math>, [[User:Tohline/SphericallySymmetricConfigurations/Virial#averageas defined elsewhere]], is used in place of <math>c_s</math>, the mathematical expression for <math>M_\mathrm{max}</math> has exactly the same form as in the isothermal case. But for the <math>n=5</math> polytrope we know that the limiting configuration has a dimensionless radius given precisely by <math>\xi_e = 3</math>; and, as a result, the leading coefficient in the definition of <math>M_\mathrm{max}</math> is prescribable analytically, namely, <math>\alpha = 2^{3/10} \cdot (3^7/2^8 \pi)^{1/2} \approx 1.33943</math>. As is documented in the table accompanying the relation for <math>M_\mathrm{max}</math>, above, in the case of a truncated <math>n=5</math> polytrope, [[User:Tohline/SphericallySymmetricConfigurations/Virial#Maximum_Massthe simpler and more approximate virial analysis gives]], <math>\alpha = (3^{19}/2^{12}\cdot 5^7\pi)^{1/2} \approx 1.07523</math>.  +  Our [[User:Tohline/SSC/Structure/PolytropesEmbedded#Extension_to_Bounded_Sphere_2detailed forcebalance analysis of truncated and pressurebounded, <math>~n=5</math> polytropes]] identifies a physically analogous limiting mass. If the average isothermal sound speed, <math>~\bar{c_s}</math>, [[User:Tohline/SphericallySymmetricConfigurations/Virial#averageas defined elsewhere]], is used in place of <math>c_s</math>, the mathematical expression for <math>~M_\mathrm{max}</math> has exactly the same form as in the isothermal case. But for the <math>~n=5</math> polytrope we know that the limiting configuration has a dimensionless radius given precisely by <math>~\xi_e = 3</math>; and, as a result, the leading coefficient in the definition of <math>~M_\mathrm{max}</math> is prescribable analytically, namely, <math>~\alpha = 2^{3/10} \cdot (3^7/2^8 \pi)^{1/2} \approx 1.33943</math>. As is documented in the table accompanying the relation for <math>~M_\mathrm{max}</math>, above, in the case of a truncated <math>~n=5</math> polytrope, [[User:Tohline/SphericallySymmetricConfigurations/Virial#Maximum_Massthe simpler and more approximate virial analysis gives]], <math>~\alpha = (3^{19}/2^{12}\cdot 5^7\pi)^{1/2} \approx 1.07523</math>. 
==SchönbergChandrasekhar Mass==  ==SchönbergChandrasekhar Mass==  
  In the early 1940s, [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)] discovered that a star with an isothermal core will become unstable if the fractional mass of the core is above some limiting value. They discovered this by constructing models that are now commonly referred to as bipolytropes, that is, models in which the star's core is  +  In the early 1940s, Chandrasekhar and his colleagues (see [http://adsabs.harvard.edu/abs/1941ApJ....94..525H Henrich & Chandraskhar (1941)] and [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)]) discovered that a star with an isothermal core will become unstable if the fractional mass of the core is above some limiting value. They discovered this by constructing models that are now commonly referred to as ''composite polytropes'' or ''bipolytropes'', that is, models in which the star's core is described by a polytropic equation of state having one index — say, <math>~n_c</math> — and the star's envelope is described by a polytropic equation of state of a different index — say, <math>~n_e</math>. In [[User:Tohline/SSC/Structure/BiPolytropes#BiPolytropesan accompanying discussion]] we explain in detail how the two structural components with different polytropic indexes are pieced together mathematically to build equilibrium bipolytropes. For a given choice of the two indexes, <math>~n_c</math> and <math>~n_e</math>, a sequence of models can be generated by varying the radial location at which the interface between the core and envelope occurs. As the interface location is varied, the relative amount of mass enclosed inside the core, <math>~\nu \equiv M_\mathrm{core}/M_\mathrm{tot}</math>, quite naturally varies as well. 
+  
+  [http://adsabs.harvard.edu/abs/1941ApJ....94..525H Henrich & Chandraskhar (1941)] built structures of uniform composition having an isothermal core (<math>~n_c = \infty</math>) and an <math>~n_e = 3/2</math> polytropic envelope and found that equilibrium models exist only for values of <math>~\nu \le \nu_\mathrm{max} \approx 0.35</math>. [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)] extended this analysis to include structures in which the mean molecular weight of the gas changes discontinuously across the interface. Specifically, they used the same values of <math>~n_c</math> and <math>~n_e</math> as Henrich & Chandrasekhar, but they constructed models in which the ratio of the molecular weight in the core to the molecular weight in the envelope is <math>~\mu_c/\mu_e = 2</math>. This was done to more realistically represent stars as they evolve off the main sequence; they have inert, isothermal helium cores and envelopes that are rich in hydrogen. Note that introducing a discontinuous drop in the mean molecular weight at the coreenvelope interface also introduces a discontinuous drop in the gas density across the interface. As the following excerpt from p. 168 of their article summarizes, in these models, [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)] found that <math>~\nu_\mathrm{max} \approx 0.101</math>. This is commonly referred to as the SchönbergChandrasekhar mass limit, although it was Henrich & Chandrasekhar who were the first to identify the instability.  
+  <div align="center">  
+  <table border="1" cellpadding="5" width="60%">  
+  <tr>  
+  <td align="center" colspan="2">  
+  <b>  
+  Text excerpt from [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)]  
+  </b>  
+  </td>  
+  </tr>  
+  
+  <tr>  
+  <td align="center" colspan="2">  
+  [[Image:SC42excerpt.jpg600pxcenter]]  
+  <! [[Image:AAAwaiting01.png600pxcenter]] >  
+  </td>  
+  </tr>  
+  
+  </table>  
+  </div>  
+  In an effort to develop a more complete appreciation of the onset of the instability associated with the SchönbergChandrasekhar mass limit, [http://adsabs.harvard.edu/abs/1988Ap%26SS.147..219B Beech (1988)] matched an analytically prescribable, <math>~n_e = 1</math> polytropic envelope to an isothermal core and, like Schönberg & Chandrasekhar, allowed for a discontinuous change in the molecular weight at the interface. [For an even more comprehensive generalization and discussion, see [http://adsabs.harvard.edu/abs/2012MNRAS.421.2713B Ball, Tout, & Żytkow] (2012, MNRAS, 421, 2713)]. Beech's results were not significantly different from those reported by [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)]; in particular, the value of <math>~\nu_\mathrm{max}</math> was still only definable numerically because an isothermal core cannot be described in terms of analytic functions.  
+  
+  [[User:Tohline/SSC/Structure/BiPolytropes/Analytic5_1#BiPolytrope_with_nc_.3D_5_and_ne_.3D_1In an accompanying derivation]] [see, also, [http://adsabs.harvard.edu/abs/1998MNRAS.298..831E Eggleton, Faulkner, and Cannon] (1998, MNRAS, 298, 831)] we have gone one step farther, matching an analytically prescribable, <math>~n_e = 1</math> polytropic envelope to an analytically prescribable, <math>~n_c = 5</math> polytropic core. For this bipolytrope, we show that there is a limiting massfraction, <math>~\nu_\mathrm{max}</math>, for any choice of the molecular weight ratio <math>~\mu_c/\mu_e > 3</math> and that the interface location, <math>~\xi_i</math>, associated with this critical configuration is given by the positive, real root of the following relation:  
  
  
  
<div align="center">  <div align="center">  
<math>  <math>  
  +  \biggl(\frac{\pi}{2} + \tan^{1} \Lambda_i\biggr) (1+\ell_i^2) [ 3 + (1m_3)^2(2\ell_i^2)\ell_i^2]   
  </math>  +  m_3 \ell_i [(1m_3)\ell_i^4  (m_3^2  m_3 +2)\ell_i^2  3] = 0 \, , 
+  </math>  
</div>  </div>  
  +  where,  
<div align="center">  <div align="center">  
<math>  <math>  
  +  \ell_i \equiv \frac{\xi_i}{\sqrt{3}} \, ;  
  +  </math>  
+   
+  <math>  
+  m_3 \equiv 3 \biggl( \frac{\mu_c}{\mu_e} \biggr)^{1} \, ;  
+  </math>  
+  and  
+  <math>  
+  \Lambda_i \equiv \frac{1}{m_3\ell_i} [ 1 + (1m_3)\ell_i^2] \, .  
</math>  </math>  
</div>  </div>  
  ==  +  ==Relationship Between the BonnorEbert and SchönbergChandrasekhar Critical Masses== 
  [[User:Tohline/SSC/Structure/  +  [[User:Tohline/SSC/Structure/BiPolytropes/Analytic5_1#Limit_when_m3_.3D_0As we have shown elsewhere]], in the limit <math>~m_3 \rightarrow 0</math>, the physically relevant root of the above analytic relation is <math>~\xi_i = 3</math> and the mass contained in the core is, 
+  <div align="center">  
+  <math>  
+  M_\mathrm{core} = \biggl( \frac{1}{2} \biggr)^{3/10}\biggl( \frac{3^{7}}{2^{8}\pi} \biggr)^{1/2} \biggl( \frac{c_s^8}{G^3 P_e} \biggr)^{1/2} \, .</math>  
+  </div>  
+  While the pressure at the base of the envelope in this model is satisfactorily confining the core to a finite radius, the condition <math>~m_3 \rightarrow 0</math> implies that the massdensity at the base of — indeed, throughout — the envelope is zero. [[User:Tohline/SSC/Structure/BiPolytropes#The_Tohline_GeneralizationAs we have pointed out elsewhere]], this can be achieved by introducing a temperature discontinuity rather than a molecular weight discontinuity across the interface. Hence, there is no mass in the envelope and the resulting model is, effectively, a truncated <math>~n=5</math> polytrope embedded in a hot, tenuous external medium. It therefore should not come as a surprise that this critical SchönbergChandrasekhartype configuration has a mass that is precisely equal to the BonnorEbert limiting mass, as defined by a "bounded <math>~n=5</math> polytrope." (See the second row from the bottom in the above table.)  
+  
+  It should be clear from this analysis that the BonnorEbert critical mass is not distinct from the SchönbergChandrasekhar critical mass. It can be derived from the SchönbergChandrasekhar mass in the limit when <math>\mu_e/\mu_c \rightarrow 0</math>. Had [http://adsabs.harvard.edu/abs/1942ApJ....96..161S Schönberg & Chandrasekhar (1942)] examined their model in this limit, they would have "discovered" the BonnorEbert mass a decade prior to both Bonnor's and Ebert's published works.  
  +  {{LSU_WorkInProgress}}  
<div align="center">  <div align="center">  
  <table border="  +  <table border="2" cellpadding="8"> 
  +  
  +  
  +  
  +  
<tr>  <tr>  
  <td align="center"  +  <td align="center" colspan="2"> 
  +  <font color="darkblue">Equilibrium MassRadius Diagram </font>  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
</td>  </td>  
</tr>  </tr>  
  
<tr>  <tr>  
  <td align="center"  +  <td align="center" bgcolor="white"> 
  <  +  [[File:Stahler1983TitlePage0.png300pxcenterStahler (1983) Title Page]] 
+  <! [[Image:AAAwaiting01.png300pxcenterStahler (1983) Title Page]] >  
</td>  </td>  
  +  <td align="center" colspan="1" bgcolor="white">  
  +   
  +  
  +  
  +  
  +  
  <td align="center" colspan="1"  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
</td>  </td>  
</tr>  </tr>  
<tr>  <tr>  
  <td align="center">  +  <td align="center" bgcolor="white"> 
  <  +  [[File:Stahler_MRdiagram1.png300pxcenterStahler (1983) Figure 17 (edited)]] 
+  <! [[Image:AAAwaiting01.png300pxcenterStahler (1983) Figure 17 (edited)]] >  
</td>  </td>  
  <td align="center"  +  <td align="center" rowspan="1" bgcolor="white"> 
  +  [[Image:MassRadiusVirialLabeled.png300pxcenter]]  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
</td>  </td>  
</tr>  </tr>  
<tr>  <tr>  
  <td align="center">  +  <td align="center" bgcolor="white"> 
  +  [[File:Stahler1983Comparison.png300pxcenterTo be compared with Stahler (1983)]]  
</td>  </td>  
  <td align="center"  +  <td align="center" rowspan="1" bgcolor="white"> 
  +  [[Image:PlotSequencesBest02.png300pxcenter]]  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
</td>  </td>  
</tr>  </tr>  
  
</table>  </table>  
</div>  </div>  
  =  +  =Related Discussions= 
  +  * [[User:Tohline/SSC/Structure/PolytropesEmbedded#Embedded_Polytropic_SpheresPolytropes emdeded in an external medium]]  
  +  * [[User:Tohline/SSC/Structure/BiPolytropes#BiPolytropesConstructing BiPolytropes]]  
  +  * [[User:Tohline/SSC/Structure/BiPolytropes/Analytic5_1#BiPolytrope_with_nc_.3D_5_and_ne_.3D_1Analytic description of BiPolytrope with <math>(n_c, n_e) = (5,1)</math>]]  
  +  * [[User:Tohline/SSC/Structure/BonnorEbert#PressureBounded_Isothermal_SphereBonnorEbert spheres]]  
  +  ** [http://en.wikipedia.org/wiki/BonnorEbert_mass BonnorEbert Mass] according to Wikipedia  
  +  ** [http://www.astro.umd.edu/~cychen/MATLAB/ASTR320/matlabFrom320spring2011/BonnorEbertSphere/html/BonnorEbert.html A MATLAB script to determine the BonnorEbert Mass coefficient] developed by [http://www.astro.umd.edu/people/cychen.html CheYu Chen] as a graduate student in the University of Maryland Department of Astronomy  
  [[  +  * [[User:Tohline/SSC/Structure/LimitingMasses#Sch.C3.B6nbergChandrasekhar_MassSchönbergChandrasekhar limiting mass]] 
  +  * [[User:Tohline/SSC/Structure/LimitingMasses#Relationship_Between_the_BonnorEbert_and_Sch.C3.B6nbergChandrasekhar_Critical_MassesRelationship between BonnorEbert and SchönbergChandrasekhar limiting masses]]  
  +  * [https://ui.adsabs.harvard.edu/abs/1971A%26A....14..351M/abstract Maeder, A. (1971, Astron. & Astrophysics, 14, 351  358).] — Examines the effects of rotation on the SchönbergChandrasekhar limiting mass.  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  and  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  +  
  
  
{{LSU_HBook_footer}}  {{LSU_HBook_footer}} 
Current revision as of 10:22, 19 November 2020
Contents 
Mass Upper Limits
 Tiled Menu  Tables of Content  Banner Video  Tohline Home Page  
Spherically symmetric, selfgravitating, equilibrium configurations can be constructed from gases exhibiting a wide variety of degrees of compressibility. When examining how the internal structure of such configurations varies with compressibility, or when examining the relative stability of such structures, it can be instructive to construct models using a polytropic equation of state because the degree of compressibility can be adjusted by simply changing the value of the polytropic index, , across the range, . (Alternatively, one can vary the effective adiabatic exponent of the gas, .) In particular, represents a hard equation of state and describes an incompressible configuration, while represents an isothermal and extremely soft equation of state.
Isolated Polytropes
Isolated polytropic spheres exhibit three attributes that are especially key in the context of our present discussion:
 The equilibrium structure is dynamically stable if .
 The equilibrium structure has a finite radius if .
 The equilibrium structure can be described in terms of closedform analytic expressions for , , and .
Isothermal Spheres
Isothermal spheres (polytropes with index ) are discussed in a wide variety of astrophysical contexts because it is not uncommon for physical conditions to conspire to create an extended volume throughout which a configuration exhibits uniform temperature. But mathematical models of isothermal spheres are relatively cumbersome to analyze because they extend to infinity, they are dynamically unstable, and they are not describable in terms of analytic functions. In such astrophysical contexts, we have sometimes found it advantageous to employ an polytrope instead of an isothermal sphere. An isolated polytrope can serve as an effective surrogate for an isothermal sphere because it is infinite in extent and is dynamically unstable, but it is less cumbersome to analyze because its structure can be described by closedform analytic expressions.
Bounded Isothermal Sphere & BonnorEbert Mass
In the mid1950s, Ebert (1955) and Bonnor (1956) independently realized that an isothermal gas cloud can be stabilized by embedding it in a hot, tenuous external medium. The relevant mathematical model is constructed by chopping off the isothermal sphere at some finite radius — call it, — and imposing an externally applied pressure, , that is equal to the pressure of the isothermal gas at the specified edge of the truncated sphere. But for a given mass and temperature, there is a value of below which the truncated isothermal sphere is dynamically unstable, like its isolated and untruncated counterpart. Viewed another way, given the value of and the isothermal sound speed, , a bounded isothermal sphere will be dynamically stable only if its mass is below a critical value,
BonnorEbert Mass


where is a dimensionless coefficient of order unity. This limiting mass is often referred to as the BonnorEbert mass. It appears most frequently in the astrophysics literature in discussions of star formation because that is the arena in which both Bonnor and Ebert were conducting research when they made their discoveries.
As is reviewed in a related discussion and as is documented in the table accompanying the expression for , above, Bonnor (1956) used Emden's (1907) tabulated properties of an isothermal sphere to determine that the dimensionless radius of this limiting configuration is and that the leading coefficient, . It is worth noting that a global virial analysis of the stability of bounded isothermal spheres produces the same expression for with a leading coefficient that has an exact, analytic prescription, namely, . While it can be advantageous to reference this analytic prescription of α, the virial analysis must be considered more approximate than Bonnor's analysis because it does not require the construction of models that are in detailed force balance.
Our detailed forcebalance analysis of truncated and pressurebounded, polytropes identifies a physically analogous limiting mass. If the average isothermal sound speed, , as defined elsewhere, is used in place of c_{s}, the mathematical expression for has exactly the same form as in the isothermal case. But for the polytrope we know that the limiting configuration has a dimensionless radius given precisely by ; and, as a result, the leading coefficient in the definition of is prescribable analytically, namely, . As is documented in the table accompanying the relation for , above, in the case of a truncated polytrope, the simpler and more approximate virial analysis gives, .
SchönbergChandrasekhar Mass
In the early 1940s, Chandrasekhar and his colleagues (see Henrich & Chandraskhar (1941) and Schönberg & Chandrasekhar (1942)) discovered that a star with an isothermal core will become unstable if the fractional mass of the core is above some limiting value. They discovered this by constructing models that are now commonly referred to as composite polytropes or bipolytropes, that is, models in which the star's core is described by a polytropic equation of state having one index — say, — and the star's envelope is described by a polytropic equation of state of a different index — say, . In an accompanying discussion we explain in detail how the two structural components with different polytropic indexes are pieced together mathematically to build equilibrium bipolytropes. For a given choice of the two indexes, and , a sequence of models can be generated by varying the radial location at which the interface between the core and envelope occurs. As the interface location is varied, the relative amount of mass enclosed inside the core, , quite naturally varies as well.
Henrich & Chandraskhar (1941) built structures of uniform composition having an isothermal core () and an polytropic envelope and found that equilibrium models exist only for values of . Schönberg & Chandrasekhar (1942) extended this analysis to include structures in which the mean molecular weight of the gas changes discontinuously across the interface. Specifically, they used the same values of and as Henrich & Chandrasekhar, but they constructed models in which the ratio of the molecular weight in the core to the molecular weight in the envelope is . This was done to more realistically represent stars as they evolve off the main sequence; they have inert, isothermal helium cores and envelopes that are rich in hydrogen. Note that introducing a discontinuous drop in the mean molecular weight at the coreenvelope interface also introduces a discontinuous drop in the gas density across the interface. As the following excerpt from p. 168 of their article summarizes, in these models, Schönberg & Chandrasekhar (1942) found that . This is commonly referred to as the SchönbergChandrasekhar mass limit, although it was Henrich & Chandrasekhar who were the first to identify the instability.
Text excerpt from Schönberg & Chandrasekhar (1942) 

In an effort to develop a more complete appreciation of the onset of the instability associated with the SchönbergChandrasekhar mass limit, Beech (1988) matched an analytically prescribable, polytropic envelope to an isothermal core and, like Schönberg & Chandrasekhar, allowed for a discontinuous change in the molecular weight at the interface. [For an even more comprehensive generalization and discussion, see Ball, Tout, & Żytkow (2012, MNRAS, 421, 2713)]. Beech's results were not significantly different from those reported by Schönberg & Chandrasekhar (1942); in particular, the value of was still only definable numerically because an isothermal core cannot be described in terms of analytic functions.
In an accompanying derivation [see, also, Eggleton, Faulkner, and Cannon (1998, MNRAS, 298, 831)] we have gone one step farther, matching an analytically prescribable, polytropic envelope to an analytically prescribable, polytropic core. For this bipolytrope, we show that there is a limiting massfraction, , for any choice of the molecular weight ratio and that the interface location, , associated with this critical configuration is given by the positive, real root of the following relation:
where,
and
Relationship Between the BonnorEbert and SchönbergChandrasekhar Critical Masses
As we have shown elsewhere, in the limit , the physically relevant root of the above analytic relation is and the mass contained in the core is,
While the pressure at the base of the envelope in this model is satisfactorily confining the core to a finite radius, the condition implies that the massdensity at the base of — indeed, throughout — the envelope is zero. As we have pointed out elsewhere, this can be achieved by introducing a temperature discontinuity rather than a molecular weight discontinuity across the interface. Hence, there is no mass in the envelope and the resulting model is, effectively, a truncated polytrope embedded in a hot, tenuous external medium. It therefore should not come as a surprise that this critical SchönbergChandrasekhartype configuration has a mass that is precisely equal to the BonnorEbert limiting mass, as defined by a "bounded polytrope." (See the second row from the bottom in the above table.)
It should be clear from this analysis that the BonnorEbert critical mass is not distinct from the SchönbergChandrasekhar critical mass. It can be derived from the SchönbergChandrasekhar mass in the limit when . Had Schönberg & Chandrasekhar (1942) examined their model in this limit, they would have "discovered" the BonnorEbert mass a decade prior to both Bonnor's and Ebert's published works.
Material that appears after this point in our presentation is under development and therefore
may contain incorrect mathematical equations and/or physical misinterpretations.
 Go Home 
Related Discussions
 Polytropes emdeded in an external medium
 Constructing BiPolytropes
 Analytic description of BiPolytrope with (n_{c},n_{e}) = (5,1)
 BonnorEbert spheres
 BonnorEbert Mass according to Wikipedia
 A MATLAB script to determine the BonnorEbert Mass coefficient developed by CheYu Chen as a graduate student in the University of Maryland Department of Astronomy
 SchönbergChandrasekhar limiting mass
 Relationship between BonnorEbert and SchönbergChandrasekhar limiting masses
 Maeder, A. (1971, Astron. & Astrophysics, 14, 351  358). — Examines the effects of rotation on the SchönbergChandrasekhar limiting mass.
© 2014  2021 by Joel E. Tohline 