Difference between revisions of "User:Tohline/SSC/Structure/BiPolytropes"

From VistrailsWiki
Jump to navigation Jump to search
(→‎Solution Steps: Modify title and finish righthand column of Table 3)
(→‎Solution Steps: Temporary text after Table 3)
Line 682: Line 682:
</table>
</table>
</div>
</div>
In his analysis of "composite [polytropic] configurations" (see &sect; 28 of [[User:Tohline/Appendix/References#C67|[<b><font color="red">C67</font></b>]]]), Chandrasekhar found it useful to take the ratio of the <math>1^\mathrm{st}</math> and <math>2^\mathrm{nd}</math> expressions in Table 3 (left-hand side) to obtain,
<div align="center">
<math>
x=7
</math>
</div>
and the ratio of the <math>3^\mathrm{rd}</math> and <math>4^\mathrm{th}</math> expressions in Table 3 (left-hand side) to obtain,


=Example Solutions=
=Example Solutions=

Revision as of 18:31, 30 March 2013

BiPolytropes

Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

This discussion of bipolytropes is built upon the early ideas and mathematical foundation laid out by Milne (1930), Cowling (1931), Schönberg & Chandrasekhar (1942) and, especially, §28 (pp. 171-174) of [C67].

Background

While polytropic spheres can give us useful general insight into the internal structure of stars, they do not faithfully represent the detailed structure of most stars, in part, because the equation of state that is most relevant to the densest regions of a star usually is different from the equation of state that is relevant to the star's envelope. As is highlighted in the following excerpt from Cowling (1931), Milne (1930) was among the first to suggest that more realism could be achieved by constructing what is now commonly referred to as a bipolytrope: a composite model in which the envelope, obeying one equation of state — described by polytropic index <math>n_e</math> — is fitted to a core obeying a different equation of state — described by polytropic index <math>n_c</math>.

Excerpt from the introductory paragraphs of Cowling (1931)

CowlingRE Milne1931.jpg

Milne (1930) envisioned that the temperature, <math>~T</math>, and pressure, <math>~P</math>, should be "continuous across the surface of fit." Given that <math>~T</math> and <math>~P</math> are continuous, he envisioned that the gas density, <math>~\rho</math>, should be continuous across the surface of fit as well. Schönberg & Chandrasekhar (1942) later pointed out — see the following journal article excerpt — that, if the core and envelope have different molecular weights, it is the ratio <math>~\rho</math>/<math>~\bar{\mu}</math> that should be continuous across the interface. A discontinuous jump in <math>~\bar{\mu}</math> at the interface — for example, switching from a pure helium core to an envelope whose dominant element is hydrogen — will therefore lead to a discontinuous jump in <math>~\rho</math> at the interface.

Excerpt from §2 of Schönberg & Chandrasekhar (1942)

<imagemap>

   Image:SchonbergChandra1942.jpg|600px|References
   rect 0  480 210 580 User:Tohline/PGE
   rect 260 480 850 580 User:Tohline/Appendix/References#C67
   desc none
   </imagemap> 

Schönberg & Chandrasekhar (1942) furthermore pointed out — again, see the relevant article excerpt — that, when constructing a bipolytropic model, the mathematical function that specifies the mass enclosed inside a spherical radius <math>r</math> for the core, <math>M(r)|_\mathrm{c}</math>, must give the same value as the mathematical function that specifies the mass enclosed inside a spherical radius <math>r</math> for the envelope, <math>M(r)|_\mathrm{e}</math> at the radial location of the interface, <math>r_i</math>.

Setup

Here we lay the mathematical foundation for building a spherically symmetric structure in which the core and the envelope are described by different barotropic equations of state. The <math>2^\mathrm{nd}</math> and <math>3^\mathrm{rd}</math> columns of Table 1 provide the relevant set of relations for a structure in which the core and envelope obey polytropic equations of state that have, respectively, polytropic indexes <math>n_c</math> and <math>n_e</math>. Drawing on our related discussion of isolated polytropes, it is clear that the structural profile in both regions should be given by a solution of the

Lane-Emden Equation

LSU Key.png

<math>~\frac{1}{\xi^2} \frac{d}{d\xi}\biggl( \xi^2 \frac{d\Theta_H}{d\xi} \biggr) = - \Theta_H^n</math>

If either region is governed by an isothermal, rather than polytropic, equation of state then, as we have discussed in the context of both isolated and pressure-bounded isothermal spheres and as is shown by equation (374) of [C67], the structural profile should be given instead by a solution of the related equation,

<math> \frac{1}{\chi^2} \frac{d}{d\chi} \biggl( \chi^2 \frac{d\psi}{d\chi} \biggr) = e^{-\psi} \, . </math>

The <math>1^\mathrm{st}</math> column of Table 1 provides the relevant set of associated structural relations for an isothermal core.

Table 1: Setup

Core: Choose isothermal equation of state or polytropic index <math>n_c</math>

Envelope

Isothermal <math>(n_c = \infty)</math>

<math>n = n_c</math>

<math>n = n_e</math>

<math> \frac{1}{\chi^2} \frac{d}{d\chi} \biggl( \chi^2 \frac{d\psi}{d\chi} \biggr) = e^{-\psi} </math>

sol'n: <math> \psi(\chi) </math>

<math> \frac{1}{\xi^2} \frac{d}{d\xi} \biggl( \xi^2 \frac{d\theta}{d\xi} \biggr) = \theta^{n_c} </math>

sol'n: <math> \theta(\xi) </math>

<math> \frac{1}{\eta^2} \frac{d}{d\eta} \biggl( \eta^2 \frac{d\phi}{d\eta} \biggr) = \phi^{n_e} </math>

sol'n: <math> \phi(\eta) </math>

Specify: <math>c_s^2</math> and <math>\rho_0 ~\Rightarrow</math>

<math>\rho</math>

<math>=</math>

<math>\rho_0 e^{-\psi}</math>

<math>P</math>

<math>=</math>

<math>c_s^2 \rho_0 e^{-\psi}</math>

<math>r</math>

<math>=</math>

<math>\biggl[ \frac{c_s^2}{4\pi G\rho_0} \biggr]^{1/2} \chi</math>

<math>M_r</math>

<math>=</math>

<math>\biggl[ \frac{c_s^6}{4\pi G^3\rho_0} \biggr]^{1/2} \biggl( \chi^2 \frac{d\psi}{d\chi} \biggr)</math>

Specify: <math>K_c</math> and <math>\rho_0 ~\Rightarrow</math>

<math>\rho</math>

<math>=</math>

<math>\rho_0 \theta^{n_c}</math>

<math>P</math>

<math>=</math>

<math>K_c \rho_0^{1+1/n_c} \theta^{n_c + 1}</math>

<math>r</math>

<math>=</math>

<math>\biggl[ \frac{(n_c + 1)K_c}{4\pi G} \biggr]^{1/2} \rho_0^{(1-n_c)/(2n_c)} \xi</math>

<math>M_r</math>

<math>=</math>

<math>4\pi \biggl[ \frac{(n_c + 1)K_1}{4\pi G} \biggr]^{3/2} \rho_0^{(3-n_c)/(2n_c)} \biggl(-\xi^2 \frac{d\theta}{d\xi} \biggr)</math>

Knowing: <math>K_e</math> and <math>\rho_e ~\Rightarrow</math>

<math>\rho</math>

<math>=</math>

<math>\rho_e \phi^{n_e}</math>

<math>P</math>

<math>=</math>

<math>K_e \rho_e^{1+1/n_e} \phi^{n_e + 1}</math>

<math>r</math>

<math>=</math>

<math>\biggl[ \frac{(n_e + 1)K_e}{4\pi G} \biggr]^{1/2} \rho_e^{(1-n_e)/(2n_e)} \eta</math>

<math>M_r</math>

<math>=</math>

<math>4\pi \biggl[ \frac{(n_e + 1)K_e}{4\pi G} \biggr]^{3/2} \rho_e^{(3-n_e)/(2n_e)} \biggl(-\eta^2 \frac{d\phi}{d\eta} \biggr)</math>


Polytropic Core

Using the notation established in Table 1, if the core obeys a polytropic equation of state, the variable <math>\xi</math> will denote the dimensionless radial coordinate through the core and the relevant solution is a function, <math>\theta(\xi)</math>, whose value goes to <math>1</math> and whose first derivative, <math>d\theta/d\xi</math>, goes to <math>0</math> at <math>\xi = 0</math>. Then, given a value of the central density, <math>\rho_0</math>, the density throughout the core is,

<math>\rho(\xi) = \rho_0 \theta(\xi)^{n_c}</math> ;

and, given a value of the polytropic constant in the core, <math>K_c</math>, the pressure throughout the core is,

<math>P(\xi) = K_c \rho_0^{1+1/n_c} \theta(\xi)^{n_c + 1}</math>.

Likewise, given <math>\rho_0</math> and <math>K_c</math>, the radial coordinate <math>r</math> (in dimensional rather than dimensionless units) and the mass enclosed within this radius, <math>M_r</math>, are given by the bottom two expressions shown in the <math>2^\mathrm{nd}</math> column of Table 1.

The structure of an isolated polytrope would be described by following the function <math>\theta(\xi)</math> all the way out to the surface, that is, to the radial location <math>\xi_\mathrm{surf}</math> where <math>\theta(\xi)</math> first drops to zero. (Analytic solutions of this type are presented elsewhere for <math>n = 0</math>, <math>n = 1</math>, and <math>n = 5</math>.) In constructing a bipolytrope, we will instead follow <math>\theta(\xi)</math> out to a radius <math>\xi_i < \xi_\mathrm{surf}</math>, then build an envelope whose inner radius — or base — is at the interface radius, <math>r_i</math>, that corresponds to <math>\xi_i</math>. For any choice of the pair of polytropic indexes, <math>n_c</math> and <math>n_e</math>, a series of bipolytropes can then be constructed by choosing a variety of different interface radii.

Polytropic Envelope

Again following the notation of Table 1, we will use <math>\eta</math> to identify the dimensionless radial coordinate through the envelope, and the relevant solution of the Lane-Emden equation will be the function, <math>\phi(\eta)</math>. The particular solution that we seek for the envelope will differ from the solution obtained in the core not only because the governing polytropic index is different but also because the envelope solution will be constrained by different boundary conditions: The value of the function <math>\phi(\eta)</math> as well as its first derivative, <math>d\phi/d\eta</math>, must be specified at some radial location within the envelope. Because the envelope does not extend all the way to the center of the structure, it makes more sense to choose a solution in which <math>\phi</math> is set to unity at the inner edge of the envelope — that is, at the radial location <math>\eta_i</math> that corresponds to <math>r_i</math> — rather than at <math>\eta = 0</math>. By setting <math>\phi = 1</math> at the base of the envelope, it should be clear from the expression,

<math> \rho = \rho_e \phi^{n_e} \, , </math>

(taken from the <math>3^\mathrm{rd}</math> column of Table 1) that <math>\rho_e</math> represents the value of the gas density at the base of the envelope. The value of <math>\rho_e</math> can be obtained from knowledge of the gas density at the outer edge of the core (i.e., at <math>r_i</math>) combined with the specified molecular-weight jump condition at the interface. Looking ahead at the first interface condition for a polytropic core catalogued in Table 2, we see more specifically that, after setting <math>\phi_i = 1</math>,

<math> \rho_e = \rho_0 \biggl( \frac{\mu_e}{\mu_c} \biggr) \theta^{n_c}_i \, . </math>

As we will show in connection with Table 3, the value of <math>d\phi/d\eta</math> at the base of the envelope (i.e., at <math>r_i</math>) also will be set by the properties of the core at the interface — specifically, by the values of <math>(d\theta/d\xi)_i</math> and <math>\theta_i</math>.

Interface Conditions

The <math>2^\mathrm{nd}</math> and <math>3^\mathrm{rd}</math> columns of Table 1 provide the mathematical relations that are needed to implement the interface matching conditions specified by equation (1) of Schönberg & Chandrasekhar (1942) (see the above article excerpt) when the core obeys a polytropic equation of state. For example, in order to ensure that,

<math> P(r_i)|_c = P(r_i)|_e \, , </math>

the expression for <math>P</math> given in the <math>2^\mathrm{nd}</math> column and evaluated at the interface is set equal to the expression for <math>P</math> given in the <math>3^\mathrm{rd}</math> column and evaluated at the interface. This results in the <math>2^\mathrm{nd}</math> relation shown in the left-hand column of Table 2, namely,

<math> K_c \rho_0^{1+1/n_c} \theta^{n_c + 1}_i = K_e \rho_e^{1+1/n_e} \phi^{n_e + 1}_i \, . </math>

Likewise, in order to ensure that,

<math> M_r(r_i)|_c = M_r(r_i)|_e \, , </math>

the expression for <math>M_r</math> given in the <math>2^\mathrm{nd}</math> column of Table 1 and evaluated at the interface is set equal to the expression for <math>M_r</math> given in the <math>3^\mathrm{rd}</math> column of Table 1 and evaluated at the interface. This results in the <math>4^\mathrm{th}</math> relation shown in the left-hand column of Table 2. The <math>3^\mathrm{rd}</math> relation shown in the left-hand column of Table 2 ensures that the dimensionless coordinate used to identify the surface of the core, <math>\xi_i</math>, and the dimensionless coordinate used to identify the base of the envelope, <math>\eta_i</math>, refer to exactly the same physical (dimensional) radial location, <math>r_i</math>. It is obtained by setting the expression for <math>r</math> given in the <math>2^\mathrm{nd}</math> column of Table 1 and evaluated at the interface equal to the expression for <math>r</math> given in the <math>3^\mathrm{rd}</math> column of Table 1 and evaluated at the interface.

Finally, drawing on the expressions for <math>\rho</math> that are given in the <math>2^\mathrm{nd}</math> and <math>3^\mathrm{rd}</math> columns of Table 1, we note that the <math>1^\mathrm{st}</math> relation shown in the left-hand column of Table 2 ensures that,

<math> \frac{\rho(r_i)}{\mu}\biggr|_c = \frac{\rho(r_i)}{\mu}\biggr|_e \, . </math>

This relation also ensures that, as desired,

<math> T(r_i)|_c = T(r_i)|_e \, , </math>

if, as assumed by Schönberg & Chandrasekhar (1942) (again, see the above article excerpt), <math>T</math> is related to <math>P</math> and <math>\rho</math> through the ideal-gas equation of state. More specifically, according to the ideal-gas equation of state,

<math> \frac{1}{T} = \biggl[ \frac{H}{kP} \biggr] \frac{\rho}{\mu} \, . </math>

Hence, if <math>P</math> is continuous across the interface, as has already been assured, then the continuity of <math>T</math> across the interface will be ensured by guaranteeing the continuity of <math>\rho/\mu</math> across the interface.


Table 2: Interface Conditions

Polytropic Core

Isothermal Core

<math>\biggl( \frac{\rho_0}{\mu_c} \biggr) \theta^{n_c}_i</math>

<math>=</math>

<math>\biggl( \frac{\rho_e}{\mu_e} \biggr) \phi^{n_e}_i</math>

<math>K_c \rho_0^{1+1/n_c} \theta^{n_c + 1}_i</math>

<math>=</math>

<math>K_e \rho_e^{1+1/n_e} \phi^{n_e + 1}_i</math>

<math>\biggl[ \frac{(n_c + 1)K_c}{4\pi G} \biggr]^{1/2} \rho_0^{(1-n_c)/(2n_c)} \xi_i</math>

<math>=</math>

<math>\biggl[ \frac{(n_e + 1)K_e}{4\pi G} \biggr]^{1/2} \rho_e^{(1-n_e)/(2n_e)} \eta_i</math>

<math>[ (n_c + 1)K_1 ]^{3/2} \rho_0^{(3-n_c)/(2n_c)} \biggl(\xi^2 \frac{d\theta}{d\xi} \biggr)_i</math>

<math>=</math>

<math>[ (n_e + 1)K_e ]^{3/2} \rho_e^{(3-n_e)/(2n_e)} \biggl(\eta^2 \frac{d\phi}{d\eta} \biggr)_i</math>

<math>\biggl( \frac{\rho_0}{\mu_c} \biggr) e^{-\psi_i}</math>

<math>=</math>

<math>\biggl( \frac{\rho_e}{\mu_e} \biggr) \phi^{n_e}_i</math>

<math>c_s^2 \rho_0 e^{-\psi_i}</math>

<math>=</math>

<math>K_e \rho_e^{1+1/n_e} \phi^{n_e + 1}_i</math>

<math>\biggl[ \frac{c_s^2}{4\pi G\rho_0} \biggr]^{1/2} \chi_i</math>

<math>=</math>

<math>\biggl[ \frac{(n_e + 1)K_e}{4\pi G} \biggr]^{1/2} \rho_e^{(1-n_e)/(2n_e)} \eta_i</math>

<math>\biggl[ \frac{c_s^6}{4\pi G^3\rho_0} \biggr]^{1/2} \biggl( \chi^2 \frac{d\psi}{d\chi} \biggr)_i</math>

<math>=</math>

<math>4\pi \biggl[ \frac{(n_e + 1)K_e}{4\pi G} \biggr]^{3/2} \rho_e^{(3-n_e)/(2n_e)} \biggl(-\eta^2 \frac{d\phi}{d\eta} \biggr)_i</math>

After setting <math>\mu_c=\mu_e=1</math>, these four relations become identical to equations 482-485 (p. 172) of [C67].

After setting <math>n_e = 1</math>, these four relations are essentially identical to, respectively, equations (13), (10), (12), & (11) of Beech 1988b; adopting <math>n_e=3</math> instead, they serve as the foundation of earlier work by Henrich & Chandraskhar (1941).

The relations shown in the right-hand column of Table 2 provide analogous conditions that must be satisfied in order to ensure the proper continuity of physical parameters across the interface of a composite structure that has an isothermal, rather than a polytropic, core. These interface conditions have been derived by properly associating the relations in the <math>1^\mathrm{st}</math> column of Table 1 with corresponding relations in the <math>3^\mathrm{rd}</math> column of Table 1.

Solution Steps

  • Step 1: Choose <math>n_c</math> and <math>n_e</math>.
  • Step 2: Adopt boundary conditions at the center of the core (<math>\theta = 1</math> and <math>d\theta/d\xi = 0</math> at <math>\xi=0</math>), then solve Lane-Emden equation to obtain the solution, <math>\theta(\xi)</math>, and its first derivative, <math>d\theta/d\xi</math> throughout the core; the radial location, <math>\xi = \xi_s</math>, at which <math>\theta(\xi)</math> first goes to zero identifies the natural surface of an isolated polytrope that has a polytropic index <math>n_c</math>.
  • Step 3 Choose the desired location, <math>0 < \xi_i < \xi_s</math>, of the outer edge of the core.
  • Step 4: Specify <math>K_c</math> and <math>\rho_0</math>; the structural profile of, for example, <math>\rho(r)</math>, <math>P(r)</math>, and <math>M_r(r)</math> is then obtained throughout the core — over the radial range, <math>0 \le \xi \le \xi_i</math> and <math>0 \le r \le r_i</math> — via the relations in the <math>2^\mathrm{nd}</math> column of Table 1.
  • Step 5: Specify the ratio <math>\mu_e/\mu_c</math>, then use the interface conditions to determine:
    • The gas density at the base of the envelope, <math>\rho_e</math>;
    • The polytropic constant of the envelope, <math>K_e</math>, relative to the polytropic constant of the core, <math>K_c</math>;
    • The ratio of the two dimensionless radial parameters at the interface, <math>\eta_i/\xi_i</math>;
    • The radial derivative of the envelope solution at the interface, <math>(d\phi/d\eta)_i</math>.
  • Step 6: The last sub-step of solution step 5 provides the boundary condition that is needed — in addition to our earlier specification that <math>\phi_i = 1</math> — to derive the desired particular solution, <math>\phi(\eta)</math>, of the Lane-Emden equation that is relevant throughout the envelope; knowing <math>\phi(\eta)</math> also provides the relevant structural first derivative, <math>d\phi/d\eta</math>, throughout the envelope.
  • Step 7: The surface of the bipolytrope will be located at the radial location, <math>\eta = \eta_s</math> and <math>r=R</math>, at which <math>\phi(\eta)</math> first drops to zero.
  • Step 8: The structural profile of, for example, <math>\rho(r)</math>, <math>P(r)</math>, and <math>M_r(r)</math> is then obtained throughout the envelope — over the radial range, <math>\eta_i \le \eta \le \eta_s</math> and <math>r_i \le r \le R</math> — via the relations provided in the <math>3^\mathrm{rd}</math> column of Table 1.


Table 3: Sub-steps of Solution Step 5
(Derived from the relations in Table 2, assuming <math>\phi_i = 1</math>)

Polytropic Core

Isothermal Core

<math>\frac{\rho_e}{\rho_0}</math>

<math>=</math>

<math>\biggl( \frac{\mu_e}{\mu_c} \biggr) \theta^{n_c}_i</math>

<math>\biggl( \frac{K_e}{K_c} \biggr) \rho_0^{1/n_e - 1/n_c}</math>

<math>=</math>

<math>\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-(1+1/n_e)} \theta^{1 - n_c/n_e}_i</math>

<math>\frac{\eta_i}{\xi_i}</math>

<math>=</math>

<math>\biggl[ \frac{(n_c + 1)}{(n_e+1)} \biggr]^{1/2} \biggl( \frac{\mu_e}{\mu_c}\biggr) \theta_i^{(n_c-1)/2}</math>

<math>\biggl( \frac{d\phi}{d\eta} \biggr)_i</math>

<math>=</math>

<math>\biggl[ \frac{n_c + 1}{n_e + 1} \biggr]^{1/2} \theta_i^{- (n_c + 1)/2} \biggl( \frac{d\theta}{d\xi} \biggr)_i</math>

<math>\biggl( \frac{\rho_e}{\rho_0} \biggr)</math>

<math>=</math>

<math>\biggl( \frac{\mu_e}{\mu_c} \biggr) e^{-\psi_i}</math>

<math>\frac{K_e \rho_0^{1/n_e} }{c_s^2} </math>

<math>=</math>

<math>\biggl( \frac{\mu_e}{\mu_c} \biggr)^{-(1+1/n_e)} e^{+\psi_i/n_e}</math>

<math>\frac{\eta_i}{\chi_i}</math>

<math>=</math>

<math>(n_e + 1)^{-1/2} e^{-\psi_i/2} \biggl( \frac{\mu_e}{\mu_c} \biggr)</math>

<math>\biggl(\frac{d\phi}{d\eta} \biggr)_i</math>

<math>=</math>

<math>(n_e + 1)^{-1/2} e^{+\psi_i/2} \biggl(\frac{d\psi}{d\chi} \biggr)_i</math>

In his analysis of "composite [polytropic] configurations" (see § 28 of [C67]), Chandrasekhar found it useful to take the ratio of the <math>1^\mathrm{st}</math> and <math>2^\mathrm{nd}</math> expressions in Table 3 (left-hand side) to obtain,

<math> x=7 </math>

and the ratio of the <math>3^\mathrm{rd}</math> and <math>4^\mathrm{th}</math> expressions in Table 3 (left-hand side) to obtain,

Example Solutions

Related Discussions

Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation