User:Tohline/Apps/GoldreichWeber80

From VistrailsWiki
< User:Tohline
Revision as of 17:02, 5 September 2014 by Tohline (talk | contribs) (→‎Dimensionless Normalization: Playing with Euler equation in an effort to match PK07 with Goldreich & Weber)
Jump to navigation Jump to search

Homologously Collapsing Stellar Cores

Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

Review of Goldreich and Weber (1980)

This is principally a review of the dynamical model that Peter Goldreich & Stephen Weber (1980, ApJ, 238, 991) developed to describe the near-homologous collapse of stellar cores.

Governing Equations

Goldreich & Weber begin with the identical set of principal governing equations that serves as the foundation for all of the discussions throughout this H_Book. In particular, as is documented by their equation (1), their adopted equation of state is adiabatic/polytropic,

<math>~P = \kappa \rho^\gamma \, ,</math>

— where both <math>~\kappa</math> and <math>~\gamma</math> are constants — and therefore satisfies what we have referred to as the

Adiabatic Form of the
First Law of Thermodynamics

(Specific Entropy Conservation)

<math>~\frac{d\epsilon}{dt} + P \frac{d}{dt} \biggl(\frac{1}{\rho}\biggr) = 0</math> .


their equation (2) is what we have referred to as the

Eulerian Representation
or
Conservative Form
of the Continuity Equation,

<math>~\frac{\partial\rho}{\partial t} + \nabla \cdot (\rho \vec{v}) = 0</math>

their equation (3) is what we have referred to as the

Euler Equation
in terms of the Vorticity,

<math>~\frac{\partial\vec{v}}{\partial t} + \vec\zeta \times \vec{v}= - \frac{1}{\rho} \nabla P - \nabla \biggl[\Phi + \frac{1}{2}v^2 \biggr] </math>

where, <math>~\vec\zeta \equiv \nabla\times \vec{v}</math> is the fluid vorticity; and their equation (4) is the

Poisson Equation

LSU Key.png

<math>\nabla^2 \Phi = 4\pi G \rho</math>

Tweaking the set of principal governing equations, as we have written them, to even more precisely match equations (1) - (4) in Goldreich & Weber (1980), we should replace the state variable <math>~P</math> (pressure) with <math>~H</math> (enthalpy), keeping in mind that, <math>~\gamma = 1 + 1/n</math>, and, as presented in our introductory discussion of barotropic supplemental relations,

<math>~H = \biggl( \frac{\gamma}{\gamma-1} \biggr) \kappa \rho^{\gamma-1} \, ,</math>

and,

<math>~\nabla H = \frac{\nabla P}{\rho} \, .</math>

Imposed Constraints

Goldreich & Weber (1980) specifically choose to examine the spherically symmetric collapse of a <math>~\gamma = 4/3</math> fluid. With this choice of adiabatic index, the equation of state becomes,

<math>~H = 4 \kappa \rho^{1/3} \, .</math>

And because a strictly radial flow-field exhibits no vorticity (i.e., <math>\vec\zeta = 0</math>), the Euler equation can be rewritten as,

<math>~\frac{\partial v_r}{\partial t} </math>

<math>~=</math>

<math>~-~ \nabla_r \biggl[ H + \Phi + \frac{1}{2}v^2 \biggr] \, .</math>

Goldreich & Weber also realize that, because the flow is vorticity free, the velocity can be obtained from a stream function, <math>~\psi</math>, via the relation,

<math>~\vec{v} = \nabla\psi \, .</math>

We will insert the stream function into the Euler equation, below, after introducing the radial normalization factor used by Goldreich & Weber.


Dimensionless Normalization

In their investigation, Goldreich & Weber (1980) chose the same length scale for normalization that is used in deriving the Lane-Emden equation, which governs the hydrostatic structure of a polytrope of index <math>~n</math>, that is,

<math> a_\mathrm{n} \equiv \biggl[\frac{1}{4\pi G}~ \biggl( \frac{H_c}{\rho_c} \biggr)\biggr]^{1/2} \, , </math>

where the subscript, "c", denotes central values. In this case <math>~(n = 3)</math>, substitution of the equation of state expression for <math>~H_c</math> leads to,

<math> a(t) = \rho_c^{-1/3} \biggl(\frac{\kappa}{\pi G}\biggr)^{1/2} \, . </math>

Most significantly, Goldreich & Weber (see their equation 6) allow the normalizing scale length to vary with time in order for the governing equations to accommodate a self-similar dynamical solution. In doing this, they effectively adopted an accelerating coordinate system with a time-dependent dimensionless radial coordinate,

<math>~\vec\mathfrak{x} \equiv \frac{1}{a(t)} \vec{r} \, .</math>


ASIDE: It wasn't immediately obvious to me how the set of differential governing equations should be modified in order to accommodate a radially contracting (accelerating) coordinate system. I did not understand the transformed set of equations presented by Goldreich & Weber as equations (7) and (8), for example. I turned to Poludnenko & Khokhlov (2007, Journal of Computational Physics, 220, 678) — hereafter, PK07 — for guidance. PK07 develop a set of governing equations that allows for coordinate rotation as well as expansion or contraction; here we will ignore any modifications due to rotation.

We note, first, that PK07 (see their equation 4) adopt an accelerated radial coordinate of the same form as Goldreich & Weber,

<math>~\tilde{r} \equiv \biggl[ \frac{1}{a(t)} \biggr] \vec{r} \, ,</math>

but the PK07 time-dependent scale factor is dimensionless, whereas the scale factor adopted by Goldreich & Weber — denoted here as <math>~a_{GW}(t)</math> — has units of length. To transform from the KP07 notation, we ultimately will set,

<math>~\mathfrak{x} = \frac{1}{a_0} \tilde{r} ~~~~~\Rightarrow ~~~~~ a_{GW}(t) = a_0 a(t) \, ,</math>

where, <math>~a_0</math> is understood to be the Goldreich & Weber scale length at the onset of collapse, that is, at <math>~t = 0</math>. According to PK07, this leads to a new "accelerated" time (see, again, their equation 4 with the exponent, <math>~\beta = 0</math>)

<math>~\tau \equiv \int_0^t \frac{dt}{a(t)} \, .</math>

According to equation (7) of PK07 — again, setting their exponent <math>~\beta=0</math> — the relationship between the fluid velocity in the inertial frame, <math>~\vec{v}</math>, to the fluid velocity measured in the accelerated frame, <math>~\tilde{v}</math>, is

<math>~\vec{v} = \tilde{v} + \biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde{r} \, .</math>

We note that, according to equation (8) of PK07, the first derivative of <math>~a(t)</math> with respect to physical time is,

<math>~\dot{a} = \frac{d\ln a}{d\tau} \, ,</math>

so the transformation between velocities may equally well be written as,

<math>~\vec{v} = \tilde{v} + \dot{a} \tilde{r} \, ;</math>

and we note that (see equation 9 of PK07),

<math>~\ddot{a} = \frac{1}{a} \biggl[ \frac{d^2\ln a}{d\tau^2} \biggr] \, .</math>

Next, we note that Goldreich & Weber introduce a variable to track the dimensionless density,

<math>~f^3</math>

<math>~=</math>

<math>~\biggl( \frac{\rho}{\rho_c} \biggr) = \biggl( \frac{\pi G}{\kappa} \biggr)^{3/2} [a_{GW}(t)]^3 \rho \, .</math>

Comparing this to equation (10) of PK07, which introduces a density field, <math>~\tilde\rho</math>, as viewed in the accelerated frame of reference of the form,

<math>~\tilde\rho = [a(t)]^\alpha \rho \, ,</math>

we see that, by setting the exponent <math>~\alpha = 3</math>, the Goldreich & Weber dimensionless density can be retrieved from the PK07 work by setting,

<math>~f^3= \frac{\tilde\rho}{\rho_0} \, ,</math>

where,

<math>~\rho_0 \equiv \biggl( \frac{\kappa}{\pi G a_0^2} \biggr)^{3/2} \, .</math>

PK07 then claim that, in the accelerating reference frame, the continuity equation and Euler equation become, respectively,

<math>~\frac{\partial \tilde\rho}{\partial \tau} + \tilde{\nabla}\cdot(\tilde\rho \tilde{v})</math>

<math>~=</math>

<math>~(3-\nu)\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho \, ,</math>

<math>~\frac{\partial \tilde\rho \tilde{v} }{\partial \tau} + \tilde{\nabla} \cdot(\tilde\rho \tilde{v} \tilde{v}) </math>

<math>~=</math>

<math>~(2-\nu)\biggl[ \frac{d\ln a}{d\tau} \biggr] \tilde\rho \tilde{v} - \biggl[ \frac{d^2\ln a}{d\tau^2} \biggr] \tilde\rho \tilde{r} - \tilde{\nabla}\tilde{P} \, ,</math>

where PK07 have introduced <math>~\nu</math> as a "dimensionality parameter of the problem." With the aid of the continuity equation, the left-hand-side of the Euler equation can be rewritten as,

<math>~\frac{\partial \tilde\rho \tilde{v} }{\partial \tau} + \tilde{\nabla} \cdot(\tilde\rho \tilde{v} \tilde{v}) </math>

<math>~=</math>

<math> \biggl[ \tilde\rho \frac{\partial \tilde{v} }{\partial \tau} + \tilde{v} \frac{\partial \tilde\rho }{\partial \tau} \biggr] + \biggl[ (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} + (\tilde\rho \tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr] </math>

 

<math>~=</math>

<math> \tilde\rho \frac{\partial \tilde{v} }{\partial \tau} + \biggl[(3-\nu)\biggl( \frac{d\ln a}{d\tau} \biggr) \tilde\rho \tilde{v} - (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} \biggr] + \biggl[ (\tilde{v} \cdot \tilde{\nabla} ) \tilde\rho \tilde{v} + (\tilde\rho \tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr] </math>

 

<math>~=</math>

<math> \tilde\rho \biggl[ \frac{\partial \tilde{v} }{\partial \tau} + (3-\nu)\biggl( \frac{d\ln a}{d\tau} \biggr) \tilde{v} + (\tilde{v} \cdot \tilde{\nabla})\tilde{v} \biggr] \, . </math>

Hence, the Euler equation becomes,

<math> \frac{\partial \tilde{v} }{\partial \tau} + (\tilde{v} \cdot \tilde{\nabla})\tilde{v} + \biggl( \frac{d\ln a}{d\tau} \biggr) \tilde{v} + \biggl( \frac{d^2\ln a}{d\tau^2} \biggr) \tilde{r} </math>

<math>~=</math>

<math>~ - \frac{\tilde{\nabla}\tilde{P}}{\tilde\rho} \, .</math>


Now, let's shift to physical parameters. For example,

<math>~\tilde{v}</math>

<math>~~~\rightarrow~~~</math>

<math>~\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \, ;</math>

<math>~\frac{\partial}{\partial\tau}</math>

<math>~~~\rightarrow~~~</math>

<math>~\frac{\partial t}{\partial\tau} \frac{\partial}{\partial t} = a \frac{\partial}{\partial t} \, .</math>

Hence, the Euler equation becomes,

<math>~ - \tilde{\nabla}\tilde{H} </math>

<math>~=</math>

<math> a\frac{\partial}{\partial t} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] + (\tilde{v} \cdot \tilde{\nabla})\tilde{v} + \dot{a} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] + \ddot{a} \vec{r} </math>

 

<math>~=</math>

<math>a\frac{\partial \vec{v} }{\partial t} - a \biggl[ \biggl(\frac{\ddot{a}}{a} \biggr) \vec{r} - \biggl(\frac{\dot{a}}{a} \biggr)^2 \vec{r} + \biggl(\frac{\dot{a}}{a} \biggr) \frac{\partial \vec{r} }{\partial t} \biggr] + (\tilde{v} \cdot \tilde{\nabla})\tilde{v} + \dot{a} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] + \ddot{a} \vec{r} </math>

 

<math>~=</math>

<math>a\frac{\partial \vec{v} }{\partial t} + (\tilde{v} \cdot \tilde{\nabla})\tilde{v} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] </math>

 

<math>~=</math>

<math>a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] + \biggl\{\biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggr\} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] </math>

 

<math>~=</math>

<math>a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] + (\vec{v} \cdot \tilde\nabla)\biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \cdot \tilde{\nabla} \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] </math>

 

<math>~=</math>

<math> \biggl\{ a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] + (\vec{v} \cdot \tilde\nabla)\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \cdot \tilde{\nabla} \vec{v} \biggr\} - (\vec{v} \cdot \tilde\nabla)\biggl[ \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] + \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \cdot \tilde{\nabla} \biggl[\biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] </math>

 

<math>~=</math>

<math> \biggl\{ a\frac{\partial \vec{v} }{\partial t} + \dot{a} \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] + (\vec{v} \cdot \tilde\nabla)\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \cdot \tilde{\nabla} \vec{v} \biggr\} - \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggl[\dot{a} \tilde{r} \biggr] </math>

 

<math>~=</math>

<math> \biggl\{ a\frac{\partial \vec{v} }{\partial t} + (\vec{v} \cdot \tilde\nabla)\vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \cdot \tilde{\nabla} \vec{v} \biggr\} + \dot{a} \biggl\{ \biggl[ \vec{v} - \frac{\partial \vec{r} }{\partial t} \biggr] - \biggl[ \vec{v} - \biggl(\frac{\dot{a}}{a} \biggr) \vec{r} \biggr] \cdot \tilde{\nabla} \biggl[\tilde{r} \biggr] \biggr\} </math>



This, in turn, will mean that either the central density varies with time, or the specific entropy of all fluid elements (captured by the value of <math>~\kappa</math>) varies with time, or both. In practice, Goldreich & Weber assume that <math>~\kappa</math> is held fixed, so the time-variation in the scale length, <math>~a</math>, reflects a time-varying central density; specifically,

<math> \rho_c = \biggl(\frac{\kappa}{\pi G}\biggr)^{3/2} [a(t)]^{-3} \, . </math>

Defining the dimensionless radial coordinate,

<math>~\vec{x} \equiv \frac{1}{a} \vec{r} \, ,</math>

inserting the following replacements for the spatial operators,

<math>~\nabla_r ~\rightarrow~ a^{-1} \nabla_x</math>        and        <math>~\nabla_r^2 ~\rightarrow~ a^{-2} \nabla_x^2 \, ,</math>

and writing the velocity in terms of the appropriately scaled stream function,

<math>~\vec{v} = a^{-1}\nabla_x \psi \, ,</math>

the Euler equation becomes,

<math>~\frac{\partial }{\partial t} \biggl[\frac{1}{a} \nabla_x\psi \biggr]</math>

<math>~=</math>

<math>~-~ \frac{1}{a}\nabla_x \biggl[ H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi \biggr)^2 \biggr] </math>

<math>~\Rightarrow~~~~\frac{1}{a} \frac{\partial }{\partial t} \biggl(\nabla_x\psi \biggr) - \biggl( \frac{\dot{a}}{a^2} \biggr)\nabla_x\psi </math>

<math>~=</math>

<math>~-~ \frac{1}{a}\nabla_x \biggl[ H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi \biggr)^2 \biggr] \, .</math>

Now, because (by design) the dimensionless "<math>~x</math>" coordinate is independent of time and the scaling parameter, <math>~a(t)</math>, is not a function of space, the <math>~\nabla_x</math> operator in the first term on the left-hand-side can be brought outside of the time derivative and, in the second term on the left-hand-side, the coefficient involving the scale length can be brought inside the spatial operator. If we also multiply through by <math>~a</math>, the Euler equation becomes,

<math>~\nabla_x \biggl[ \frac{\partial \psi}{\partial t} - \biggl( \frac{\dot{a}}{a} \biggr)\psi + H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi \biggr)^2 \biggr] </math>

<math>~=</math>

<math>~0 \, .</math>

As Goldreich & Weber (1980) point out, because all terms in this equation are inside the gradient operator, the sum of the terms inside the square brackets must equal a constant — that is, the sum must be independent of spatial position throughout the spherically symmetric configuration. If, following Goldreich & Weber's lead, we simply fold this integration constant into the potential, the Euler equation becomes (see their equation 8),

<math>~\frac{\partial \psi}{\partial t} - \biggl( \frac{\dot{a}}{a} \biggr)\psi + H + \Phi + \frac{1}{2}\biggl(\frac{1}{a} \nabla_x\psi \biggr)^2 </math>

<math>~=</math>

<math>~0 \, .</math>



Work-in-progress.png

Material that appears after this point in our presentation is under development and therefore
may contain incorrect mathematical equations and/or physical misinterpretations.
|   Go Home   |


<math>~\frac{\partial \rho}{\partial t} + \rho \nabla_r \cdot \vec{v} + \vec{v}\cdot \nabla_r \rho</math>

<math>~=</math>

<math>~0</math>

<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + \nabla_r \cdot \vec{v} + \vec{v}\cdot \frac{\nabla_r \rho}{\rho}</math>

<math>~=</math>

<math>~0</math>

<math>~\Rightarrow ~~~~ \frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1} \nabla_x \cdot \biggl[ a^{-1} \nabla_x \psi \biggr] + a^{-1} \nabla_x \psi \cdot \frac{a^{-1}\nabla_x \rho}{\rho}</math>

<math>~=</math>

<math>~0</math>

<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}

+ a^{-2} \nabla_x^2\psi </math>

<math>~=</math>

<math>~0</math>

Goldreich & Weber's (1980) Governing Equations After Initial Length Scaling (yet to be demonstrated)

<math>~\frac{1}{\rho} \frac{\partial \rho}{\partial t} + a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \frac{\nabla_x\rho}{\rho}

+ a^{-2} \nabla_x^2\psi </math>

<math>~=</math>

<math>~0</math>

<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2 + H + \Phi</math>

<math>~=</math>

<math>~0</math>

<math>~ a^{-2} \nabla_x^2\Phi - 4\pi G \rho </math>

<math>~=</math>

<math>~0</math>

where,

<math>~\vec{x} \equiv \frac{\vec{r}}{a} \, ,</math>

and it is understood that derivatives in the <math>~\nabla_x</math> and <math>~\nabla_x^2</math> operators are taken with respect to the dimensionless radial coordinate, <math>~x</math>.


Next, Goldreich & Weber (1980) (see their equation 10) choose to normalize the density by the central density, specifically defining a dimensionless function,

<math>f \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/3} \, .</math>

Keeping in mind that <math>~n = 3</math>, this is also in line with the formulation and evaluation of the Lane-Emden equation, where the primary dependent structural variable is the dimensionless polytropic enthalpy,

<math>\Theta_H \equiv \biggl( \frac{\rho}{\rho_c} \biggr)^{1/n} \, .</math>

Finally, Goldreich & Weber (1980) (see their equation 11) normalize the gravitational potential to the square of the central sound speed,

<math>c_s^2 = \frac{\gamma P_c}{\rho_c} = \frac{4}{3} \kappa \rho_c^{1/3} = \frac{4}{3}\biggl(\frac{\kappa^3}{\pi G}\biggr)^{1/2} [a(t)]^{-1} \, .</math>

Specifically, their dimensionless gravitational potential is,

<math>~\sigma</math>

<math>~\equiv</math>

<math>~\biggl[ \frac{3}{4} \biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} a(t) \biggr] \Phi \, .</math>

With these additional scalings, the continuity equation becomes,

<math>~\frac{\partial}{\partial t} \biggl[ \ln \biggl(\frac{f}{a} \biggr)^3 \biggr]</math>

<math>~=</math>

<math>~-~ a^{-1}(a^{-1} \nabla_x\psi - \dot{a} \vec{x}) \cdot \nabla_x(\ln f^3)

- a^{-2} \nabla_x^2\psi \, ;</math>

the Euler equation becomes,

<math>~\frac{\partial \psi}{\partial t} - \frac{\dot{a}}{a} \vec{x}\cdot \nabla_x\psi + \frac{1}{2} a^{-2} | \nabla_x\psi|^2</math>

<math>~=</math>

<math>~ - a^{-1} \biggl[ \frac{4}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \biggr] (3f + \sigma) \, ;</math>

and the Poisson equation becomes,

<math>~\frac{4}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} a^{-3} \nabla_x^2\sigma</math>

<math>~=</math>

<math>~4\pi G\biggl( \frac{\kappa}{\pi G} \biggr)^{3/2} a^{-3} f^3 </math>

<math>~\Rightarrow~~~~\nabla_x^2\sigma</math>

<math>~=</math>

<math>~3 f^3 \, .</math>

Homologous Solution

Goldreich & Weber (1980) discovered that the governing equations admit to an homologous, self-similar solution if they adopted a stream function of the form,

<math>~\psi</math>

<math>~=</math>

<math>~\frac{1}{2}a \dot{a} x^2 \, ,</math>

which generates a radial velocity profile,

<math>~\vec{v} = a^{-1}\nabla_x \psi</math>

<math>~=</math>

<math>~\hat{e}_x a^{-1} \biggl[ \frac{\partial}{\partial x} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr)\biggr] = \dot{a} \vec{x} \, . </math>

Recognizing, as well, that,

<math>~a^{-2} \nabla_x^2 \psi </math>

<math>~=</math>

<math>~\frac{1}{(ax)^2} \frac{\partial}{\partial x} \biggl[ x^2\frac{\partial }{\partial x} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr)\biggr] </math>

 

<math>~=</math>

<math>~ \biggl( \frac{\dot{a}}{a} \biggr) \frac{1}{x^2} \frac{\partial}{\partial x} \biggl[ x^3\biggr] = \frac{3\dot{a}}{a} = \frac{d\ln a^3}{dt} \, ,</math>

the continuity equation becomes,

<math>~\frac{\partial \ln f^3}{\partial t} - \frac{d \ln a^3}{dt} </math>

<math>~=</math>

<math>~- \frac{d \ln a^3}{dt} </math>

<math>~\Rightarrow ~~~ \frac{\partial \ln f^3}{\partial t} </math>

<math>~=</math>

<math>~0 \, ,</math>

that is, the dimensionless density profile, <math>~f</math>, is independent of time. With the adopted stream function, the Euler equation becomes,

<math>~ - a^{-1} \biggl[ 4\biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \biggr] \biggl(f + \frac{\sigma}{3} \biggr) </math>

<math>~=</math>

<math>~\frac{\partial }{\partial t} \biggl( \frac{1}{2}a \dot{a} x^2 \biggr) - \dot{a}^2 x^2 + \dot{a}^2 x^2</math>

 

<math>~=</math>

<math>~\frac{x^2}{2} \frac{d }{dt} \biggl( a \dot{a} \biggr) </math>

<math>~\Rightarrow~~~~ \frac{1}{x^2} \biggl(f + \frac{\sigma}{3} \biggr) </math>

<math>~=</math>

<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a \frac{d }{dt} \biggl( a \dot{a} \biggr) </math>

 

<math>~=</math>

<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a ( \dot{a}^2 + a \ddot{a}) \, .</math>

Goldreich & Weber's (1980) Euler Equation after all Scaling (yet to be demonstrated)

<math>~ \frac{1}{x^2} \biggl(f + \frac{\sigma}{3} \biggr) </math>

<math>~=</math>

<math>~-~\biggl[ \frac{1}{8}\biggl( \frac{\pi G}{\kappa^3} \biggr)^{1/2} \biggr] a^2 \ddot{a} </math>

Note that the right-hand-side of this expression differs from ours, so we need to identify and correct the discrepency.

Because everything on the left-hand-side of Goldreich & Weber's scaled Euler equation depends only on the dimensionless spatial coordinate, <math>~x</math>, while everything on the right-hand-side depends only on time — via the parameter, <math>~a(t)</math> — both expressions must equal the same constant. Goldreich & Weber (1980) (see their equation 12) call this constant, <math>~\lambda/6</math>. They conclude, therefore, (see their equation 13) that the dimensionless gravitational potential is,

<math>~\sigma</math>

<math>~=</math>

<math>~\frac{\lambda x^2}{2} - 3f \, .</math>

Also, the nonlinear differential equation governing the time-dependent variation of the scale length, <math>~a</math>, is,

<math>~ a^2 \ddot{a} </math>

<math>~=</math>

<math>~-~\frac{4\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, .</math>

As Goldreich & Weber (1980) point out, this nonlinear differential equation can be integrated twice to produce an algebraic relationship between <math>~a</math> and time, <math>~t</math>. First, rewrite the equation as,

<math>~ \frac{d \dot{a} }{dt} </math>

<math>~=</math>

<math>~-\frac{B}{2a^2} \, , </math>

where,

<math> ~B \equiv \frac{8\lambda}{3} \biggl( \frac{\kappa^3}{\pi G} \biggr)^{1/2} \, . </math>

Then, multiply both sides by <math>~2\dot{a} = 2da/dt</math> to obtain,

<math>~ 2\dot{a} \frac{d\dot{a}}{dt} </math>

<math>~=</math>

<math>~-B \biggl( a^{-2} \frac{da}{dt} \biggr) </math>

<math>~\Rightarrow~~~~ \frac{d\dot{a}^2}{dt} </math>

<math>~=</math>

<math>~B \frac{d}{dt} \biggl( \frac{1}{a} \biggr) </math>

which integrates once to give,

<math> ~\dot{a}^2 = \frac{B}{a} + C \, , </math>

or,

<math> ~dt = \biggl( \frac{B}{a} + C \biggr)^{-1/2} da \, . </math>

For the case, <math>~C = 0</math>, this differential equation can be integrated straightforwardly to give (see Goldreich & Weber's equation 15),


For the cases when <math>~C \ne 0</math>, Wolfram Mathematica's online integrator can be called upon to integrate this equation and provide the following closed-form solution,

<math>~t</math>

<math>~=</math>

<math> \frac{a}{C} \biggl( \frac{B}{a} + C \biggr)^{1/2} - \frac{B}{2C^{3/2}} \ln \biggl[2aC^{1/2} \biggl( \frac{B}{a} + C \biggr)^{1/2} + B + 2aC \biggr] \, . </math>


Related Discussions

Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation