Difference between revisions of "User:Tohline/Appendix/Ramblings/To Hadley and Imamura"

From VistrailsWiki
Jump to navigation Jump to search
(→‎Put It Together: More discussion of Figure 2)
Line 328: Line 328:
==Put It Together==
==Put It Together==


Figure 2a contains an animation sequence that is intended to illustrate that our empirically constructed radial eigenfunction and accompanying "constant phase loci"  closely resemble the radial eigenfunctions and constant phase loci that have been displayed in HI11's Figure 16 (here, redisplayed as Figure 2b).  Each frame of the Figure 2a animation, contains (on the left) a semi-log plot of <math>~f_1(\varpi)</math> versus <math>~\varpi</math> and (on the right) the corresponding constant phase loci that are generated for <math>~\phi_1</math> (top), <math>~\phi_2</math> (middle), and <math>~\phi_3</math> (bottom), when the natural log of the same function, <math>~f_\ln = \ln[f_1(\varpi)]</math>, is plugged into our empirically derived function, <math>~D_{1/2}</math>.  In a [[User:Tohline/Appendix/Ramblings/Azimuthal_Distortions#Specific_Application_to_HI11.27s_Figure_16|separate chapter]] we demonstrate in more detail how each frame of this animation sequence was constructed.  As displayed in Figure 2a, <math>~r_\mathrm{green}</math> is the only parameter that is varied from frame to frame of the animation; all of the other empirical model parameters &#8212; <math>~r_\mathrm{blue}</math>, <math>~p</math>, and <math>~\aleph</math> &#8212; are held fixed.
Figure 2a contains an animation sequence that is intended to illustrate that our empirically constructed radial eigenfunction and accompanying polar-coordinate plots of "constant phase loci"  closely resemble the radial eigenfunctions and constant phase loci that have been displayed in HI11's Figure 16 (a portion of which is redisplayed, here, as Figure 2b).  Each frame of the Figure 2a animation, contains (on the left) a semi-log plot of <math>~f_1(\varpi)</math> versus <math>~\varpi</math> and (on the right) the corresponding constant phase loci that are generated for <math>~\phi_1</math> (top), <math>~\phi_2</math> (middle), and <math>~\phi_3</math> (bottom), when the natural log of the same function, <math>~f_\ln = \ln[f_1(\varpi)]</math>, is plugged into our empirically derived function, <math>~D_{1/2}</math>.  In a [[User:Tohline/Appendix/Ramblings/Azimuthal_Distortions#Specific_Application_to_HI11.27s_Figure_16|separate chapter]] we demonstrate in more detail how each frame of this animation sequence was constructed.  As displayed in Figure 2a, <math>~r_\mathrm{green}</math> is the only parameter that is varied from frame to frame of the animation (the seven specified values are listed in a column to the left of the animation); all of the other empirical model parameters &#8212; <math>~r_\mathrm{blue}</math>, <math>~p</math>, and <math>~\aleph</math> &#8212; are held fixed.


<div align="center">
<div align="center">
<table border="1">
<table border="1">
<tr>
<tr>
   <td align="center" colspan="2">
   <td align="center" colspan="3">
<b><font size="+1">Figure 2:</font></b> &nbsp;
<b><font size="+1">Figure 2:</font></b> &nbsp;
Radial and Azimuthal Eigenfunction Comparison
Radial and Azimuthal Eigenfunction Comparison
Line 339: Line 339:
</tr>
</tr>
<tr>
<tr>
   <td align="center">'''(a)''' &nbsp; Our Empirically Constructed Function</td>
   <td align="center" colspan="2">'''(a)''' &nbsp; Our Empirically Constructed Function</td>
   <td align="center">'''(b)''' &nbsp; Extracted from Figure 16 of [http://adsabs.harvard.edu/abs/2011Ap%26SS.334....1H HI11]</td>
   <td align="center">'''(b)''' &nbsp; Extracted from Figure 16 of [http://adsabs.harvard.edu/abs/2011Ap%26SS.334....1H HI11]</td>
</tr>
</tr>
<tr>
<tr>
<td align="center">
<table border="0" cellpadding="5" align="center">
<tr>
  <td align="center">Specified<p></p><math>~r_\mathrm{green}</math><p></p><hr></td>
  <td align="center">Resulting<p></p><math>~r_\mathrm{min}</math><p></p><hr></td>
</tr>
<tr>
  <td align="center">1.10324</td>
  <td align="center">1.103</td>
</tr>
<tr>
  <td align="center">1.05929</td>
  <td align="center">1.077</td>
</tr>
<tr>
  <td align="center">1.01534</td>
  <td align="center">1.059</td>
</tr>
<tr>
  <td align="center">0.97139</td>
  <td align="center">1.042</td>
</tr>
<tr>
  <td align="center">0.88349</td>
  <td align="center">1.020</td>
</tr>
<tr>
  <td align="center">0.75164</td>
  <td align="center">0.998</td>
</tr>
<tr>
  <td align="center">0.61979</td>
  <td align="center">0.976</td>
</tr>
</table>
</td>
<td align="center">
<td align="center">
[[File:HI11Fig16Animate.gif|350px|Figure 16 from HI11]]
[[File:HI11Fig16Animate.gif|350px|Figure 16 from HI11]]
Line 353: Line 391:
</div>
</div>


Notice that, by simply varying the value of <math>~r_\mathrm{green}</math>, our semi-log plot of <math>~f_1</math> versus <math>~\varpi</math> sweeps through shapes that qualitatively match the three radial eigenfunctions that arose in the HI11 investigation.  At the largest value, <math>~r_\mathrm{green} = 1.1</math> (1<sup>st</sup> frame of the animation), the minimum of the radial eigenfunction is sharply defined and sits at <math>~r_\mathrm{min} = 1.103</math>, as labeled in the animation; this particular plot closely resembles the radial eigenfunction shown at the top of the HI11 figure and, simultaneously, the <math>~m=1</math> constant phase loci plot that appears in the same frame of the animation closely resembles the <math>~m=1</math> constant phase loci plot that is displayed at the top of the HI11 figure.  When we set <math>~r_\mathrm{green} = 1.1</math> (2<sup>nd</sup> frame of the animation), the minimum of the radial eigenfunction is sharply defined and sits at <math>~r_\mathrm{min} = 1.103</math>, as labeled in the animation; this particular plot closely resembles the radial eigenfunction shown at the top of the HI11 figure and, simultaneously, the <math>~m=1</math> constant phase loci plot that appears in the same frame of the animation closely resembles the <math>~m=1</math> constant phase loci plot that is displayed at the top of the HI11 figure.
Notice that, by simply varying the value of <math>~r_\mathrm{green}</math>, our semi-log plot of <math>~f_1</math> versus <math>~\varpi</math> sweeps through shapes that qualitatively match the three radial eigenfunctions (see Figure 2b) that arose in the HI11 investigation.  At the largest value, <math>~r_\mathrm{green} = 1.10324</math> (1<sup>st</sup> frame of the animation loop), the minimum of the radial eigenfunction is sharply defined and sits at <math>~r_\mathrm{min} = 1.103</math>, as labeled in the animation; the <math>~f_1(\varpi)</math> eigenfunction displayed in this particular frame closely resembles the radial eigenfunction shown at the top of the HI11 figure and, simultaneously, the <math>~m=1</math> constant phase loci plot that appears in the same frame of the animation closely resembles the <math>~m=1</math> constant phase loci plot that is displayed at the top of the HI11 figure.  When we set <math>~r_\mathrm{green} = 1.05929</math> (2<sup>nd</sup> frame of the animation), the minimum of the radial eigenfunction is still well-defined and sits at <math>~r_\mathrm{min} = 1.077</math>, as labeled in the animation.  The <math>~f_1(\varpi)</math> eigenfunction displayed in this 2<sup>nd</sup> frame closely resembles the radial eigenfunction shown in the middle panel of the HI11 figure and, simultaneously, the <math>~m=2</math> constant phase loci plot that appears in this 2<sup>nd</sup> frame of the animation closely resembles the <math>~m=2</math> constant phase loci plot that is displayed at the middle of the HI11 figure.


=See Also=
=See Also=

Revision as of 02:56, 7 February 2016


Summary for Hadley & Imamura

This MediaWiki-based document is especially provided for Jimmy Imamura and Kathryn Hadley. It summarizes the contents of a much longer set of technical notes that discusses the analysis of nonaxisymmetric distortions in rotating, self-gravitating fluids. The punchline is provided by the animation sequence shown in Figure 2, below.


Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

While studying the series of three papers that has recently been published by the Imamura & Hadley collaboration, I was particularly drawn to the pair of plots presented in Figure 6 — and, again, in the top portion of Figure 13 and the top portion of Figure 16 — of HI11. This pair of plots has been reprinted here, without modification, as our Figure 1. The curves delineated by the blue dots in this pair of HI11 plots display (on the left) the shape of the eigenfunction, <math>~f_1(\varpi)</math>, and (on the right) the "constant phase loci," <math>~\phi_1(\varpi)</math>, for an unstable, <math>~m=1</math> mode. In this case, the initial model for the depicted evolution is the equilibrium model from Table 2 of HI11 that has <math>~T/|W| = 0.253</math>; it is a fully self-gravitating torus with polytropic index, <math>~n = 3/2</math>, and a rotation-law profile defined by a "Keplerian" angular velocity profile.

Figure 1

Panel pair extracted without modification from the top-most segment of Figure 13, p. 18 of K. Hadley & J. N. Imamura (2011)

"Nonaxisymmetric Instabilities of Self-Gravitating Disks.   I Toroids"

Astrophysics and Space Science, 334, 1 - 26 © Springer Science+Business Media B.V.

Comparison with Hadley & Imamura (2011)

This pair of plots also appears in the top portion of Figure 16 on p. 20 and, by itself, as Figure 6 on p. 12 of K. Hadley & J. N. Imamura (2011).

Radial Eigenfunction

Recognition #1

It occurred to me, first, that the blue curve displayed in the left-hand panel of Figure 1 might be reasonably well approximated by piecing together a pair of arc-hyperbolic-tangent (ATANH) functions. In an effort to demonstrate this, I began by specifying a "midway" radial location, <math>~r_- < r_\mathrm{mid} < r_+ \, ,</math> at which the two ATANH functions meet and at which the density fluctuation is smallest. Then I defined a function of the form,

 

<math>~f_\ln(\varpi)</math>

<math>~=</math>

<math>~\tanh^{-1}\biggl[1 - 2 \biggl( \frac{\varpi - r_-}{r_\mathrm{mid}-r_-} \biggr) \biggr]</math>

        for        

<math>r_- < \varpi < r_\mathrm{mid} \, ;</math>

and
 

<math>~f_\ln(\varpi)</math>

<math>~=</math>

<math>~\tanh^{-1}\biggl[1 - 2 \biggl( \frac{\varpi - r_+}{r_\mathrm{mid}-r_+} \biggr) \biggr]</math>

        for        

<math>r_\mathrm{mid} < \varpi < r_+ \, .</math>

Recognizing that the figure depicting the HI11 eigenfunction is a semi-log plot, it seems clear that the relationship between our constructed function, <math>~f_\ln(\varpi)</math>, and the eigenfunction, <math>~f_1(\varpi)</math>, is,

<math>~f_1(\varpi) = e^{f_\ln(\varpi)} \, .</math>

Recognition #2

Given that, in general, the following mathematical relation holds,

<math>~\tanh^{-1}x</math>

<math>~=</math>

<math>~\ln\biggl( \frac{1+x}{1-x} \biggr)^{1/2} </math>

        for        

<math>x^2 < 1 \, ,</math>

we can write for the innermost region of the toroidal configuration — that is, over the lower radial-coordinate range

 

<math>~f_1(\varpi) = e^{f_\ln(\varpi)}</math>

<math>~=</math>

<math>~\biggl( \frac{r_\mathrm{mid} - \varpi}{\varpi - r_-} \biggr)^{1/2} </math>

        for        

<math>r_- < \varpi < r_\mathrm{mid} \, .</math>

Similarly, we find that, over the upper radial-coordinate range,

 

<math>~f_1(\varpi) = e^{f_\ln(\varpi)}</math>

<math>~=</math>

<math>~\biggl( \frac{r_\mathrm{mid} - \varpi}{\varpi - r_+} \biggr)^{1/2} </math>

        for        

<math>r_\mathrm{mid} < \varpi < r_+ \, .</math>

Recognition #3

After a bit more experimentation, we recognized that it is advantageous to replace the square root — that is, the exponent, ½ — with a variable exponent, <math>~p</math>, that can serve as an adjustable fitting parameter; and, in order to facilitate a degree of radial overlap between the two ATANH functions, we introduced different values of <math>~r_\mathrm{mid}</math> on the left and on the right. This led to a two-piece radial eigenfunction of the form,

 

<math>~f_\mathrm{blue}(\varpi) </math>

<math>~=</math>

<math>~\biggl( \frac{r_\mathrm{blue} - \varpi}{\varpi - r_-} \biggr)^{p} </math>

        for        

<math>r_- < \varpi < r_\mathrm{blue} </math>     …     <math>~\biggl[ f_\mathrm{blue}(\varpi) = 0</math>     otherwise<math>~\biggr]</math>,

and,

 

<math>~f_\mathrm{green}(\varpi) </math>

<math>~=</math>

<math>~\biggl( \frac{r_\mathrm{green} - \varpi}{\varpi - r_+} \biggr)^{p} </math>

        for        

<math>r_\mathrm{green} < \varpi < r_+ </math>     …     <math>~\biggl[ f_\mathrm{green}(\varpi) = 0</math>     otherwise<math>~\biggr]</math>,

where, <math>~r_\mathrm{mid}|_\mathrm{green} \le r_\mathrm{mid}|_\mathrm{blue}</math>.

Summary

The expression that we are currently using for the radial eigenfunction is a sum of these two pieces, that is,

<math>~f_1(\varpi)</math>

<math>~=</math>

<math>~f_\mathrm{green}(\varpi) + f_\mathrm{blue}(\varpi) \, . </math>

For later use, we define from this function the minimum and maximum values,

<math>~[f_\ln]_\mathrm{min} \equiv \mathrm{min}[\ln(f_1)]</math>

          and          

<math>~[f_\ln]_\mathrm{max} \equiv \mathrm{max}[\ln(f_1)] \, .</math>

Constant Phase Loci

As is explained in our accompanying detailed technical notes — see, also another improvement — we have settled on the following prescription for the phase function, <math>~\phi_m(\varpi)</math>:

<math>~m\phi_m</math>

<math>~=</math>

<math>~\tan^{-1}[\aleph \cdot D_{1/2}(\varpi)] \, .</math>

where,

<math>~D_{1/2}(\varpi)</math>

<math>~\equiv</math>

<math>~\biggl[ \frac{f_\ln(\varpi) - [f_\ln]_\mathrm{min}}{[f_\ln]_\mathrm{max} - [f_\ln]_\mathrm{min}} \biggr]^{1/2} \, ,</math>

<math>~\aleph</math> is a constant to be specified, and,

<math>~f_\ln(\varpi)</math>

<math>~\equiv</math>

<math>~\ln[ f_1(\varpi)] \, .</math>

Put It Together

Figure 2a contains an animation sequence that is intended to illustrate that our empirically constructed radial eigenfunction and accompanying polar-coordinate plots of "constant phase loci" closely resemble the radial eigenfunctions and constant phase loci that have been displayed in HI11's Figure 16 (a portion of which is redisplayed, here, as Figure 2b). Each frame of the Figure 2a animation, contains (on the left) a semi-log plot of <math>~f_1(\varpi)</math> versus <math>~\varpi</math> and (on the right) the corresponding constant phase loci that are generated for <math>~\phi_1</math> (top), <math>~\phi_2</math> (middle), and <math>~\phi_3</math> (bottom), when the natural log of the same function, <math>~f_\ln = \ln[f_1(\varpi)]</math>, is plugged into our empirically derived function, <math>~D_{1/2}</math>. In a separate chapter we demonstrate in more detail how each frame of this animation sequence was constructed. As displayed in Figure 2a, <math>~r_\mathrm{green}</math> is the only parameter that is varied from frame to frame of the animation (the seven specified values are listed in a column to the left of the animation); all of the other empirical model parameters — <math>~r_\mathrm{blue}</math>, <math>~p</math>, and <math>~\aleph</math> — are held fixed.

Figure 2:   Radial and Azimuthal Eigenfunction Comparison

(a)   Our Empirically Constructed Function (b)   Extracted from Figure 16 of HI11
Specified

<math>~r_\mathrm{green}</math>


Resulting

<math>~r_\mathrm{min}</math>


1.10324 1.103
1.05929 1.077
1.01534 1.059
0.97139 1.042
0.88349 1.020
0.75164 0.998
0.61979 0.976

Figure 16 from HI11

Figure 16 from HI11

Notice that, by simply varying the value of <math>~r_\mathrm{green}</math>, our semi-log plot of <math>~f_1</math> versus <math>~\varpi</math> sweeps through shapes that qualitatively match the three radial eigenfunctions (see Figure 2b) that arose in the HI11 investigation. At the largest value, <math>~r_\mathrm{green} = 1.10324</math> (1st frame of the animation loop), the minimum of the radial eigenfunction is sharply defined and sits at <math>~r_\mathrm{min} = 1.103</math>, as labeled in the animation; the <math>~f_1(\varpi)</math> eigenfunction displayed in this particular frame closely resembles the radial eigenfunction shown at the top of the HI11 figure and, simultaneously, the <math>~m=1</math> constant phase loci plot that appears in the same frame of the animation closely resembles the <math>~m=1</math> constant phase loci plot that is displayed at the top of the HI11 figure. When we set <math>~r_\mathrm{green} = 1.05929</math> (2nd frame of the animation), the minimum of the radial eigenfunction is still well-defined and sits at <math>~r_\mathrm{min} = 1.077</math>, as labeled in the animation. The <math>~f_1(\varpi)</math> eigenfunction displayed in this 2nd frame closely resembles the radial eigenfunction shown in the middle panel of the HI11 figure and, simultaneously, the <math>~m=2</math> constant phase loci plot that appears in this 2nd frame of the animation closely resembles the <math>~m=2</math> constant phase loci plot that is displayed at the middle of the HI11 figure.

See Also


Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation