User:Tohline/Appendix/Ramblings/RiemannMeetsOculus

From VistrailsWiki
Jump to navigation Jump to search

Rebuild Riemann S-Type Ellipsoid Inside Oculus Rift S Environment

Whitworth's (1981) Isothermal Free-Energy Surface
|   Tiled Menu   |   Tables of Content   |  Banner Video   |  Tohline Home Page   |

Preamble

In an accompanying discussion, we have illustrated how an animated, interactive 3D scene can be largely defined via the xml-formatted language named COLLADA. In the last major subsection of that discussion, we have outlined the steps that can be followed to specifically generate any of a variety of Riemann S-Type ellipsoids. These steps were identified within the context of our effort to construct 3D VR/AR models that could be faithfully rendered using the Mac's Preview app.

In a separate but closely connected discussion, we have demonstrated that most of our COLLADA-based models can be imported into the 3D virtual-reality environment of the Oculus Rift S. Toward the end of this separate discussion, we provide the full COLLADA code — in a plain text format — along with a summary description of a model that has been assigned the name, FullLast45X.dae.

Intially, we discovered that most of the Riemann S-Type ellipsoids that we developed while relying on the Mac's Preview app did not display properly within the Oculus Rift S environment. What we propose to do, here, is methodically re-construct a variety of our earlier models that were viewable in the "Preview" app in such a way that they are all viewable with the Oculus Rift S. We begin with this "… 45X" model — renaming it, RiemannBuild00.dae. Step by step we will insert components of one of our previously constructed COLLADA-based models of an S-Type Riemann ellipsoid into a <visual_scene> that can be properly executed within the Oculus Rift S.

Assemble Components

  • RiemannBuild00.dae:
    • This model, with <up_axis>Z_UP></up_axis>, contains a set of purple cubes that lie in the Y0-Z0 plane, and along the inertial frame's X0 axis from -5.0 inches to +5.0 inches; the last purple "cube" (at X0 = +5) is actually a rectangular box whose longest axis is parallel to the Z0 axis.
      Mac Preview of RiemannBuild00.dae
      Mac Preview of RiemannBuild00.dae
    • The scene also includes a red ellipsoid with axis ratios b/a = 0.41 and c/a = 0.385. The "EntireEllipsoid" has been scaled such that its longest ( c ) axis has a length of 4 inches; and it has been translated in the Y0-Z0 plane to a location along the Y0 axis where the center of the ellipsoid is 8.0 inches from the origin of the inertial coordinate system. The ellipsoid's "First" quadrant <node> was, in addition, scaled by (1.1, 1.1, 1.1) in order for it to stick out a bit from the other quadrants to help the viewer decipher its rotational behavior.
                <node id="EntireEllipsoid" name="OculusRift_EFE">
                   <translate>0.0 8.0 0.0</translate>
                   <rotate sid="rotationY">0.0 1.0 0.0  90.0</rotate>
                   <rotate sid="rotationZ">0.0 0.0 1.0  90.0</rotate>
                   <rotate sid="rotationX">1.0 0.0 0.0  90.0</rotate>
                   <scale sid="scale">4.0 4.0 4.0</scale>
                      <node id="First" name="First_instance_EFE">
                        <translate>0.0 0.0 0.0</translate>
                        <rotate sid="rotationX">1.0 0.0 0.0  0.0</rotate>
                        <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                        <rotate sid="rotationZ">0.0 0.0 1.0  0.0</rotate>
                        <scale sid="scale">1.1 1.1 1.1</scale>
                        <instance_node url="#ID3_EFE" />
                      </node>
                      ...
      
    • The default orientation of the "EntireEllipsoid" is <math>~(a, b, c) \Leftrightarrow ~ (X_0, Y_0, Z_0)</math>. But for this model, before the animation starts, the "EntireEllipsoid" is reoriented by turning it 90° in Y, then 90° in Z, then 90° in X; as displayed in the above image, this resulted in an alignment of <math>~(a, b, c) \Leftrightarrow ~ (Y_0, X_0, -Z_0)</math>.
    • The set of <animation> instructions includes a specification that, (1) TIME start at 0.0 seconds and end (one animation loop) at 10.0 seconds; (2) over this time interval, the rotation ANGLE should start at 90° and end at 270° [in COLLADA, it is understood that the ANGLE will vary linearly with TIME, unless explicitly specified otherwise]; and (3) via the <channel/target> instruction, the rotation should be about the longest (rotationX) axis of the ellipsoid.
            <float_array id="First_rotation_euler_Y-input-array" count="    2">
          0.0000
         10.0000
            </float_array>
                      ...
            <float_array id="First_rotation_euler_Y-output-array" count="    2">
          90.0
         270.0
            </float_array>
                      ...
          <channel source="#First_rotation_euler_Y-sampler" target="EntireEllipsoid/rotationX.ANGLE"/>
      
  • RiemannBuild02.dae:
    • Got rid of all of the <visual_scene><nodes> that had been used to create the line of purple "cubes"; set the "EntireEllipsoid" <translate> coordinate to zero in all three dimensions so that the center of the red ellipsoid coincided with the origin of the principal frame of reference; set to zero the values of all three <rotate> ANGLEs for the "EntireEllipsoid" so that the red ellipsoid was initially positioned in its default orientation, that is, <math>~(a, b, c) ~\Leftrightarrow ~(X_0, Y_0, Z_0)</math>;
                  <node id="EntireEllipsoid" name="OculusRift_EFE">
                   <translate>0.0 0.0 0.0</translate>
                   <rotate sid="rotationX">1.0 0.0 0.0  0.0</rotate>
                   <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                   <rotate sid="rotationZ">0.0 0.0 1.0  0.0</rotate>
                   <scale sid="scale">5.0 5.0 5.0</scale>
                      <node id="First" name="First_instance_EFE">
                        <translate>0.0 0.0 0.0</translate>
                        <rotate sid="rotationX">1.0 0.0 0.0  0.0</rotate>
                        <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                        <rotate sid="rotationZ">0.0 0.0 1.0  0.0</rotate>
                        <scale sid="scale">1.1 1.1 1.1</scale>
                        <instance_node url="#ID3_EFE" />
                      </node>
                      ...
      

      and set the <animation> parameters such that, over a 10 second interval of time, using the <channel … target="EntireEllipsoid/rotationZ.ANGLE"/> directive the ellipsoid was instructed to spin about the shortest ( c ) axis, from 0° to 180°.

            <float_array id="First_rotation_euler_Z-input-array" count="    2">
          0.0000
         10.0000
            </float_array>
                      ...
            <float_array id="First_rotation_euler_Z-output-array" count="    2">
          0.0
         180.0
            </float_array>
                      ...
          <channel source="#First_rotation_euler_Z-sampler" target="EntireEllipsoid/rotationZ.ANGLE"/>
      

    RESULT: Using the Mac's Preview app to view this modified COLLADA file, the (now) isolated red ellipsoid did spin, as desired, through 180° about the ellipsoid's shortest axis. But when imported into the Oculus Rift S environment, the isolated red ellipsoid was spinning about the ellipsoid's longest axis. I don't understand why!

  • RiemannBuild03.dae:
    Here, we implemented only two changes to the COLLADA code:   (1) We modified the "EntireEllipsoid" <node>'s "rotationZ" instruction to specify that, prior to implementing the rotation, the ellipsoid should be turned 1° [instead of zero degrees] about the shortest ( c ) axis;
                <node id="EntireEllipsoid" name="OculusRift_EFE">
                 <translate>0.0 0.0 0.0</translate>
                 <rotate sid="rotationX">1.0 0.0 0.0  0.0</rotate>
                 <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                 <rotate sid="rotationZ">0.0 0.0 1.0  1.0</rotate>
                 <scale sid="scale">5.0 5.0 5.0</scale>
                    ...
    

    and (2) inside the set of <animation> instructions, we specified that the time-dependent ANGLE should have a starting (TIME = 0.0) value of 1° and an ending (TIME = 10.0) value of 180°.

          <float_array id="First_rotation_euler_Z-output-array" count="    2">
        1.0
       180.0
          </float_array>
                    ...
    


    RESULT: The desired behavior — that is, spinning about the shortest ( c ) axis from 1° to 180° — was observed in both the Mac's Preview app and in the Oculus Rift S environment. But I don't actually understand why the Oculus import resulted in two quite different spinning motions, given that the starting ANGLE was only changed from 0° to 1°.

  • RiemannBuild05.dae:
    Pulling from the file named, b41c385_DI.dae, we added a "MidPlane Frame" to the visual_scene. This worked in the Oculus Rift S environment as well as in the Mac's Preview app (see image immediately below).
Mac Preview of …

RiemannBuild05.dae

RiemannBuild06.dae

RiemannBuild09D.dae

Mac Preview of RiemannBuild05.dae

Mac Preview of RiemannBuild06.dae

Mac Preview of RiemannBuild09D.dae

  • RiemannBuild06.dae:
    Pulling from the file named, b41c385_DI.dae, we added a "Black Cylindrical Pointer" to the visual_scene. This worked in the Oculus Rift S environment as well as in the Mac's Preview app.
  • RiemannBuild09D.dae:
    After much trial and error, we have successfully introduced two separate animation instructions. In addition to instructing the visual scene to spin the red ellipsoid about its "c" axis at a specific rate, we can now instruct the visual scene to spin the "MidPlane Frame" about the same axis, but in the opposite direction (at any specified rate), in order to mimic a rotating frame of reference. As the above image from the Mac Preview app shows, we have also added a second "Black Cylindrical Pointer", orienting it in the positive Z0 direction; and we have removed the special scaling of the "First" quadrant of the ellipsoid that had been introduced in earlier models to break the geometric symmetry of the object, thereby helping us to keep track of changes in the model's spin directions and rates.
  • RiemannBuild09G.dae: Fixed the way the second "Black Cylindrical Pointer" is handled.


CAUTION!

As we have been developing 3D VR/AR scenes using <xml>-based COLLADA coding, we have come to appreciate that this approach to code development can be very unforgiving. Generally speaking, the application that is used to render a scene based on the COLLADA-code's instructions — our primary choice is the Mac Pro's Preview app — must by necessity be picky about how it interprets each line of code. But when a coding error occurs, feedback from the app is very poor: at best the app renders a quirky scene; more often than not, it simply balks and offers no explanation.

Of more concern is our realization that an entirely different app that — according to online documentation — is supposed to be able to render COLLADA-designed 3D scenes will balk at displaying a scene despite the fact that the Mac's Preview app has done so without complaint. In the context of this discussion, the "different app" to which we are referring is the Khronos Group's (KG's) COLLADA2GLTF-bin converter which translates the xml-based COLLADA code into a format that the Oculus Rift S can import/read. This appears to indicate that the KG — and/or the Oculus Rift — developers place stricter interpretations on various COLLADA-code instructions than does Apple via its Preview app. But from our point of view, this raises the level of code-development frustration.

Two specific examples of note:

  • In a portion of the <animation> specifications that appear in our model named, RiemannBuild09D.dae, we included instructions intended to spin the red ellipsoid about its "c" axis from ANGLE = +4° to +48° over a TIME = 0 to 10.0388 seconds. Consistent with this <animation> instruction, we included within the <node id="EntireEllipsoid"> setup an instruction to set the "rotationZ" ANGLE = 4.0 initially.
                <node id="EntireEllipsoid" name="OculusRift_EFE">
                 <translate>0.0 0.0 0.0</translate>
                 <rotate sid="rotationX">1.0 0.0 0.0  0.0</rotate>
                 <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                 <rotate sid="rotationZ">0.0 0.0 1.0  4.0</rotate>
                 <scale sid="scale">5.0 5.0 5.0</scale>
                ...
    

    This set of instructions produced the desired result when the ".dae" model file was opened in the Mac Pro's Preview app and when it's equivalent ".glb" file was imported into the Oculus Rift S. SUCCESS!

    In the model file that we tested immediately preceding model RiemannBuild09D.dae, however, the <node id="EntireEllipsoid"> setup included an instruction to set the "rotationZ" ANGLE = 0.0 initially. The Mac's Preview app generated an animated and interactive 3D scene that was identical to the one it generated from the RiemannBuild09D.dae file, apparently ignoring the fact that the initial angle of 0° did not match the angle of 4° that was specified for TIME = 0 inside the set of <animation> instructions. However, when the ".glb" version of this model file was imported into the Oculus Rift S, the animation was quite different: The red ellipsoid spun slowly about its longest (a) axis instead of about its shortest ( c ) axis. [See a similar behavior discussed above in connection with our model named RiemannBuild02.dae.] It is unclear why the two different visualization applications generated quite different results from one another.

  • At the same time we inserted into the COLLADA code <animation> instructions that were designed to spin the red ellipsoid (counter-clockwise) from +4° to +48° over the time interval 0 - 10.0388 seconds, we also inserted <animation> instructions that were designed to spin the MidPlane Frame (clockwise) from -30° to -525° over the same time interval. This additional set of instructions worked as desired when the model was read into the Mac's Preview app. But when viewed inside the Oculus Rift S, the spin of the MidPlane Frame was very (unacceptably) slow. After some experimentation, we deduced that the MidPlane's spin would be incorrect if the MidPlane was asked to rotate clockwise through more than one full cycle (i.e., more than -360°). After some thought, we decided to use <animation> instructions that would dictate a positive initial spin ANGLE (about the ellipsoid's "c" axis) whose value increases with TIME and use the <node>'s initial "rotationX" instruction to flip the MidPlane Frame over by an angle of 180°. This gave us the desired result — that is, a brisk clockwise spin — when the model was viewed via the Mac's Preview app and when it was imported/viewed in the Oculus Rift S environment.
                <node id="MidPlane" name="instance_MidPlane">   <!-- TWO -->
                  <translate>0.0 0.0 0.0</translate>
                      <rotate sid="rotationX">1.0 0.0 0.0  180.0</rotate>
                      <rotate sid="rotationY">0.0 1.0 0.0  0.0</rotate>
                      <rotate sid="rotationZ">0.0 0.0 1.0  30.0</rotate>
                  <scale sid="scale">1.25 1.25 1.25</scale>
                  <instance_node url="#EqPlane" />
                </node>                                         <!-- /TWO -->
    


  • Mac Preview of
    RiemannLagrange12L.dae
    Mac Preview of RiemannLagrange12L.dae

    RiemannBuild10C.dae:
    Hold the red ellipsoid completely still at ANGLE = 0° while the MidPlane Frame spins briskly clockwise. In addition to typing in the floating-point value, 0.0, a dozen times to correlate with the twelve different specified increments of TIME, we also changed the initial value of "rotationZ" from "4.0" to "0.0" inside the "EntireEllipsoid" <node>.
    RESULT:  Seems to work in both visualization venues.

  • RiemannLagrange11B.dae:
    Insert 51 small yellow (cube) "Markers" in the equatorial plane and on the surface of the red ellipsoid to identify the trajectory of a Lagrangian fluid element.
  • RiemannLagrange12L.dae:
    Include one solitary Lagrangian fluid element (red marker that is a bit larger than the previously inserted small yellow cubes), showing its "retrograde" motion in the equatorial plane and on the surface of the — now opaque, purple — ellipsoid (see Mac Preview image shown here, on the right). In this model, the displayed time-dependent behavior — the spinning "MidPlane Frame" and the red Lagrangian fluid marker — is quantitatively correct for an S-Type Riemann ellipsoid that has the specific principal axis ratios — that is, b/a = 0.41 and c/a = 0.385 — of the displayed purple ellipsoid, and that is being viewed from a rotating frame of reference in which the ellipsoid is stationary.

S-Type Ellipsoid b41c385

Now, let's add the wall clock and alpha-numeric identification of the model's parameters.

See Also


Whitworth's (1981) Isothermal Free-Energy Surface

© 2014 - 2021 by Joel E. Tohline
|   H_Book Home   |   YouTube   |
Appendices: | Equations | Variables | References | Ramblings | Images | myphys.lsu | ADS |
Recommended citation:   Tohline, Joel E. (2021), The Structure, Stability, & Dynamics of Self-Gravitating Fluids, a (MediaWiki-based) Vistrails.org publication, https://www.vistrails.org/index.php/User:Tohline/citation